⻬ 6 or 12 Universal Inputs
⻬ Up to 4 Pulse/Frequency
Inputs
⻬ 6 or 12 Relay Outputs
⻬ Networkable Using
Standard Ethernet Port
⻬ 21 CFR Part 11
⻬ 24V Transmitter
Power Supply
⻬ NEMA 4 (IP65) Compliant
⻬ Locking Media
Access Door
⻬ Onboard Media Drives:
• CompactFlash™
• USB (Memory Stick,
External Drive, etc.)
• Smart Digital (SD)
⻬ Touch Screen Control
⻬ Direct on Screen
Chart Annotation
with Integral Stylus
⻬ Infrared Port
⻬ Built in OPC Server
⻬ Built in E-mail Client
⻬ Shallow Installation
Depth 165 mm (6.5")
Benefits
⻬ Maximum Flexibility
Achieved with
Universal Inputs
⻬ Input Pulse Signals
Directly from Flow Meters
⻬ Relay Outputs for Control
or Activating Alarms
⻬
Accessible via LAN or WEB
⻬ Reduce Cost and
Complexity by Providing
Transmitter Power
Supply
⻬ No Additional Equipment
Needed for Harsh
Environments
⻬ Media and Data Can Be
⻬ Flexibility of Multiple
⻬ Intuitive Icon Driven
⻬ Write Notes and
⻬ Remote Control
⻬ Seamlessly Interfaces
⻬ Send Alarm,
⻬ Shallow Depth Allows the
The RD8300 is the most advanced
RD8312, $2695, shown
smaller than actual size.
Locked and Secured
Media Drives
Touch Screen
Comments Directly on
Chart for Permanent
Storage with Data
Wirelessly
with Third Packages
Using OPC Standard
Instantaneous Data or
Information Anywhere
with E-Mail
Use of Economical and
Enclosures for
Installation
S-x
Locking media
access door
paperless recording system
available. It incorporates the latest
in measurement, communication,
interface and processing
technologies to deliver unmatched
performance for your data
acquisition application.
The RD8300 series utilizes a high
contrast 142 mm (5.6") color Active
Matrix TFT LCD display with a
rugged touch screen. Use a finger
or the onboard stylus, if you prefer,
to perform data entry and system
navigation. The front panel is also
fully compliant to IP65 for use in
dusty or wet areas. An intuitive icon
driven menu system guides the user
through easy to follow setup and
control screens. The display builder
feature makes setting up custom
screens extremely simple. Design
up to 50 custom displays containing
various combinations of indicator
types such as horizontal and vertical
bar graphs, large and small digital
indicators and horizontal or vertical
trends. On-screen help is available
throughout the menu system to
assist you during setup and use.
closed.
S
Intuitive System Menu
Main Menu Setup
Windows
®
Explorer Menu
Custom Designable Display Screens
Display Builder
Vertical Trend
Horizontal Trend
Horizontal Trend with Indicators
Vertical Trend with Bar Graphs
Digital Indicators with Bar Graphs
Display Screen Rotation Setup
When it comes to storing data, the
RD8300 is extremely flexible. Data
can be stored to the non-volatile
internal flash RAM or any of the
available storage drives including
CompactFlash™ and USB provided
there is media present.
Programmable record start and stop
times allow the user to start and
stop recording at predetermined
intervals. Data may also be stored
to a remote PC via Ethernet using
the optional Exhibitor Software. In
addition, the built in OPC Server
allows any OPC compliant software
Channel Setup
client to connect to, communicate
with and retrieve data. The RD8300
utilizes many layers of security to
protect the integrity of your stored
data. All data is stored in an
encrypted binary format which
prevents data tampering and
maximizes compression. The front
access media door is lockable to
prevent unauthorized access to the
internal removable storage media.
There are 3 levels of password
protection to prevent unauthorized
entry into critical recorder function
menus. To ensure that data files are
S-x
On-Screen Help
completely error free the RD8300
has a built-in rechargeable Nickel
Metal Hydride battery backup
system that constantly monitors the
incoming power source. In the event
of a power loss or power dip, the
RD8300 seamlessly switches over
to the internal power and begins a
safe and controlled system
shutdown. When power is restored
the recorder immediately returns to
the last state of operation. This
guarantees that data files will never
be corrupted by unexpected power
conditions.
S
Recording Data
Extended Warranty
Program
SM
OMEGACARESMextended warranty program
is available for models shown on this page.
Ask your sales representative for full details
when placing an order. OMEGACARE
covers parts, labor and equivalent loaners.
SM
Removable Media Types
Calendar
Write Directly On the Screen
Memory Card
SD (Internal)
USB Memory Stick
Make notes, sign files or make other
graphic indications directly on the virtual
chart in your own handwriting, or use the
built-in keyboard to type messages on the
screen. Your notes are stored within the
data file directory for future review.
The innate feature of handwriting notes and comments on the
chart of paper recorders had been lost with the onset of video
graphic recorders until the arrival of the RD8300. Using the
high-resolution touch screen interface and the integral stylus
you can once again make notes or comments directly on the
chart. This on-screen annotation is stored within the data file
directory and can be recalled and displayed on the recorder or
in Exhibitor Software.
S-x
Calculator
Powerful Math Package
The onboard math package is
extremely powerful. It allows the
user to input complex polynomial
equations using constants, custom
functions and variable inputs
obtained from live channels. The
resultant information can be
displayed and recorded as a real
time channel. Using the intuitive
calculated channel setup menu the
user enters in the formula and can
perform a test to make sure the
formula is accurate.
Play unique sound files for each alarm by
simply selecting the file you want to play
when you set up the alarm.
Unique Sounds
Unique .wav files may be uploaded
and played through the internal
speaker to alert of specific types of
alarms. Use any .wav file, even
customize your own spoken word
announcements. In areas where
there is a high level of ambient
noise the alarm .wav files can be
output to a P.A. system or amplified
speakers via the rear mounted
audio connector. Each alarm
setpoint can have a unique sound
file associated with it. In the alarm
setup menu simply select the .wav
file you want to play when the alarm
is active.
Remote Control
The remote control feature extends
the graphic user interface of the
RD8300 Series directly onto your
local PC. Use remote control and
your desktop PC’s mouse and
keyboard to view real time data,
change settings, start and stop
recording or virtually anything else
you can do with the recorders touch
screen. Across the plant or across
the planet, remote control
empowers you with virtual
presence.
Using the record setup menu, the
user can select which channels to
record, the sample storage rate,
whether to record alarms and/or
events, and the start/stop time and
date for the record session. The
location of the data file is selected in
this menu along with the data file
name. The user can also configure
the unit to start or stop recording on
an alarm level or an externally
triggered input.
Media Storage Locations
Front Accessible (Lockable):
CompactFlash
(for memory stick)
Rear Accessible: USB host, Ethernet
Internal: 512 MB standard
(larger sizes available)
TM
, USB host
Exhibitor Software
Network Overview
Exhibitor Software is an extremely
powerful set of tools that
compliments the RD8300 and
other OPC compliant devices.
Incorporating functions to simplify
Network Overview
data management via searching,
reviewing, printing, or exporting
historic data, Exhibitor Software
allows real-time monitoring and
recording independently as well,
while historic recording is not
affected. Also featured is the OPC
S-x
Client which enables the user to
build custom screens selecting
various display elements and data
from multiple OPC Servers,
including devices other than
RD8300’s. (Windows™ XP/2000
Compatible).
Customizable
Real-Time View
Use Exhibitors design page
features to create custom real
time display projects that can
be saved and recalled with a
click of the mouse. Create
bar graphs, digital panel
meters, thermometers or
trend screens from live data
coming from any RD8300 or
other OPC compliant device
accessible on the network.
Using the OPC device
manager, Exhibitor allows you
to connect to OPC servers
anywhere there is a network
connection. A user definable
list of data is then accessible
by the design page, where
customized real-time displays
are built using the user friendly
graphic user interface. To
place items, simply point,
clicks, and drags. Save your
project for future use and the
next time it is opened all
servers are automatically
connected and data will begin
displaying immediately. Go
one step further, and record
real time data to your PC.
Real Time Screen
Graphical Review
The composite graphical
view can display all inputs
and calculated data from a
particular recording session.
The user is able to manipulate
the graph to make it easy to
see interaction between
recorded channels, turn
channels off and on, change
color schemes, expand,
compress, zoom, and print.
Individual channels can be
displayed for detailed analysis.
There is a summary function
for the individual channels
which provides minimum,
maximum, averages and time
and date for the records. The
same analysis tools used for
the multi-channel graph are
used to scroll through data,
zoom, review and expand the
single channel graphs.
Select the type of control to be displayed then customize its size, color and location.
S
Graphical Review Chart
S-x
Tabular Data Screen
Tabular Data Review
The data table view displays
recorded data in tabular format. All
recorded information within a file
can be viewed or deselected along
with time stamps. Using the one
click export feature, the table can be
exported to Excel™ in its entirety or
in portions. The data table and
graph can be synchronized so that
they are interactive during analysis
of records. Double clicking a value
in the data table will automatically
bring you to the graph page with
that value and time highlighted.
Move the cursor over the point and
detailed information is provided.
Also available are separate alarm,
event, and memo review screens.
Memo review lists all on-screen
annotations in a record.
Specifications
Input Resolution: 0.0015% of full
scale, 16 bit unless otherwise stated
Input Impedance: >1 MΩ
Input Channels: 6 or 12 direct input
plus 6 additional calculated channels
Maximum Input: 50 Vdc
Isolation:
Channel to Channel: 350 Vdc or
RMS AC
Channel to Chassis: 2000 Vdc or
RMS AC
Isolation Category II: Pollution Degree 2
Measurement Rate: 10 times per
second on all direct input channels
Common Mode Noise Rejection:
>100 dB, 50/60 Hz, filter enabled
Normal Mode Noise Rejection:
>50 dB at 50/60 Hz, filter enabled
Math Functions: Fully programmable
+, -, x, /, square root, sine, cosine,
tangent, log, totalization, powers,
averages, conditional logic; AND, NOT,
OR, +, >, <, gated timers; can use live
channels in calculation; can define 6
constants and 6 functions per channel
Data Storage Capacity: Data stored in
Analog Inputs
DC Voltage: ±125 mV, ±250 mV,
±500 mV, ±1.00V, ±3.0V, ±6.0V,
±12.0V, ±24.0V
Accuracy: Ranges to 1V ±0.06%,
Ranges > 1V ±0.1%
DC Current: 4 to 20 mA, 0 to 20 mA,
10 to 50 mA
Accuracy: ±0.15% using external
50 Ω 0.1%
Thermocouple (Per ITS90):
Resolution: 0.1°C, thermocouple
burnout detection: automatic
Reference Junction Compensation
Accuracy: ±2.5°C (0 to 50°C)
1
⁄4 watt shunt
non-volatile RAM and recorded
automatically to:
Removable Media Types:
CompactFlash™ or USB drive
to 4 GB
Internal Media Type: SD card
(secure digital) to 4 GB
File Types: Data files, alarm and event
files, configuration files, language files,
multiple files of different names on a
single disk
Display
Type: Color CCFL backlit active matrix
TFT liquid crystal display
Size: 142 mm (5.6") diagonal
T/C Type Range (°C)Accuracy (°C) Range (°F)Accuracy (°F)
J -210 to -100°C ±2.5°C -340 to -150°F ±5°F
-100 to 1200°C ±1.5°C-150 to 2190°F ±3°F
K -270 to -100°C±2.5°C -450 to -150°F ±5°F
-100 to 1372°C±1.5°C -150 to 250°F ±3°F
T -270 to -100°C±2.5°C-450 to -150°F±5°F
-100 to 400°C±1.5°C -150 to 750°F ±3°F
E -270 to -100°C ±2.5°C -450 to -150°F±5°F
-100 to 1000°C ±1.5°C -150 to 1832°F ±3°F
N -270 to -100°C ±2.5°C -450 to -150°F ±5°F
-100 to 1300°C ±1.5°C -150 to 2372°F ±3°F
S -50 to 1768°C ±3°C -58 to 3200°F±6°F
B 0 to 1820°C ±4°C 32 to 3300°F ±7°F
RTD
Base Accuracy: 0.2% or 0.5°C (1°F)
Resolution: 0.1°C, 2 or 3 wire
connection; cable compensation to
+50 Ω, open and short circuit detection
Resolution: 320 W x 240 H pixels
Interface: Resistive analog touch
screen control
Display Builder: Allows user to create
custom displays
RTD Type Range (°C)Range (°F)
100 Ω Plt 385 -220 to 85°C -364 to 1560°F
100 Ω Plt 392-180 to 820°C-292 to 1500°F
200 Ω Plt 385-220 to 400°C-364 to 750°F
200 Ω Plt 392-180 to 400°C-292 to 750°F
100 Ω Ni-70 to 300°C-94 to 570°F
120 Ω Ni-70 to 300°C -94 to 570°F
1000 Ω Ni-60 to 209°C -76 to 408°F
10 Ω Cu-70 to 170°C -94 to 338°F*
* 0.5% ±0.5°C
Frequency Inputs (2 or 4 Channels):
Range: 0 to 5000 Hz all channels,
0 to 10,000 Hz 1 channel
Accuracy: 0.005% ±1 digit
Recording
Recording Rates: User programmable
from 10 samples per second to
1 sample every 24 hours
Data Format: Proprietary encrypted
format, user file naming
Display Modes: Graphic trending
(vertical or horizontal), bar graphs
(vertical or horizontal), digital meter
(large or small), alphanumeric alarm
and event log
Virtual Chart Speed: Programmable
from 10 mm/hr to 10,000 mm/hr
(0.5 inch/hour to 600 inches/hour)
Display Windows: Time/date, graphics
(bars, large digital, trends) disk status,
system status, menu button bar, unit
identification, alarms/events
S-x
COMIN-IN+
CHAN 9
COMIN-IN+
CHAN 8
COMIN-IN+FIN
CHAN 7
CHAN 3CHAN 2CHAN 1
IN+ IN- COMIN+ IN- COMFININ+ IN- COM
CHAN 12
IN+ IN- COM FINCOMIN-IN+
CHAN 11CHAN 10
IN+ IN- COM
F
IN
COMIN-IN+
CHAN 6CHAN 5
IN+ IN- COMCOMIN-IN+
CHAN 4
24VDC OUT
+
-
ON
OFF
BATTERY BACKUP
RELAY 1RELAY
2
RELAY
3
RELAY
4
RELAY 5RELAY
6
RELAY
7
RELAY 8RELAY 9RELAY
10
RELAY 11RELAY
12
DIGITAL 1 DIGITAL 2
++
-
-
RS232/485
ETHERNET
AUDIO
OUT
KEYBOARD /
MOUSE
90 - 240 VAC 35 VA
USB
MASTER A
USB
SLAVE B
150.1
(5.91)
144.0
(5.67)
144.0
(5.67)
34.7
(1.37)
139.2
(5.48)
72.7
(2.86)
Panel
Cut-out
15.2
(0.60)
Panel
Cut-out
Panel
Cut-out
137.9
(5.43)
137.9
(5.43)
15.2
(0.60)
Communications
Network: 10/100 Base T
Ethernet per 802.3, RJ45
connection
Servers: Webserver supports
http and ftp protocols, OPC
Modbus over ethernet server
Serial: Isolated RS485/RS232
Modbus
®
interface (option)
Power
Requirements: 100 to 240 Vac,
50/60 Hz; 35 VA max optional
±15%
Power Fail Protection:
Programmed parameters stored
in non-memory; clock battery
backed; internal battery backup
provides shutdown and the
ability to survive brownouts and
short blackouts seconds)
Power Output: Optional isolated
24 Vdc @ 120 mA output
Input/Output
Digital I/O: 6 or 12 relay outputs,
form A (normally open SPST
contacts) rated at 200 Vdc @
0.5 A max, 2 digital control
inputs +5 to +12 Vdc @ 20 mA
(optional), control inputs may be
used for record start/stop, alarm
acknowledge and channel reset
functions
Safety and
Environmental
Operating Range:
Protection: IP65 when
mounted in panel
Safety: Meets the
requirements accordance
of EN61010-1 when installed
in accordance with the
instructions in the manual
UL and cUL: Pending
EMC: Meets the requirements
of EN61326.2003 and CE
directive 89/336/EEC
Weight: Approximately
3.17 kg (7 lb)
Standard Features
• 142 mm (5.6") color QVGA TFT
LCD display with touch screen
and integral stylus
• CompactFlash™ drive (front),
USB thumb drive port (front)
• USB master (rear), USB slave
(rear), Internal memory
• Mouse/keyboard connection
(rear)
• Audio: line in, line out,
microphone (rear)
• RJ45 ethernet port (rear)
• NEMA 4 (IP65) front bezel with
locking media drive door
Front and Rear Locking Bar Installation
Dimensions:
mm (in)
S-x
Rear Panel
Dimensions: mm (in)
S
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model No.Price Description
RD8306$2395 6 universal inputs, 6 math channels, 100/240 Vac, 512 MB internal memory
RD8306-DC2550 6 universal inputs, 6 math channels, 12 to 24 Vdc, 512 MB internal memory
RD8306-ST2420 6 universal inputs, 6 math channels, 100/240 Vac w/screw terminals,
12 form A relay, 0.5 A @ 200 Vdc, 2 control inputs
RS232/485 serial communication
24 Vdc, 120 mA transmitter power supply
12 form A relay, 0.5 A @ 200 Vdc, 2 control inputs, RS232/485 serial
communication, 24 Vdc 120 mA transmitter power supply
512 MB internal memory
6 form A relay, 0.5 A @ 200 Vdc, 2 control inputs
12 form A relay, 0.5 A @ 200 Vdc, 2 control inputs
RS232/485 serial communication
24 Vdc, 120 mA transmitter power supply
12 form A relay, 0.5 A @ 200 Vdc, 2 control inputs, RS232/485 serial
communication, 24 Vdc, 120 mA transmitter power supply
Options (Field Installable)
Model No.PriceDescription
RD8300-6CH$3506 channel adder module with connectors
RD8300-R62506 form A relay output module with connectors
RD8300-R1235012 form A relay output with connectors
RD8300-XP15024 Vdc transmitter power supply module with connector
Accessories
RD8300-SW$249Windows®XP/Vista compatible software program
RD8300-SE-21CFR11*249Compliant Windows XP/Vista Compatible Software
RD8300-21CFR-CSN/C21CFR p.11 compliance statement
RD8300-21CFR-CDP50021CFR p.11 compliance documentation package
RD8300-NIST
†
600NIST traceable certificate of calibration with documentation
RD8300-50OHM1050 Ω external shunt resistor 0.1% accuracy
RD8300-NYLONCC95Padded nylon carrying case with shoulder strap
RD8300-CFCR50Compact flash card reader for USB connection
RD8300-AUDIOSPLITTER45Splitter for audio port (includes cable)
RD8300-KEYSPLITTER45Splitter for keyboard and mouse port (includes cables)
RD8300-STYLUS103 pack of stylus
RD8300-KEYS 10Replacement media flap key (pair)
RD8300-256MBCF40256 MB compact flash card
RD8300-512MBCF60512 MB compact flash card
RD8300-1GBCF751 GB compact flash card
RD8300-2GBCF1002 GB compact flash card
Comes complete with operator’s manual.
For FDA21CFR11 Compliant Firmware add suffix “-21CFR11” to model number and $500 to price.
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.