Omega Products RD5110 User Manual



Hybrid Chart Recorder

250 mm (10")

RD5100 Series

Starts at

6100

⻬ High Speed Scanning

at 36 Points/Sec and High-Speed Recording

⻬ High Accuracy of 0.05% ⻬ Various Industrial Values

Can be Measured at the Same Time with Selectable Ranges

⻬ Superior Ease of

Operation

⻬ Engineering Port is

Provided (USB)

⻬ Anti-Noise

Countermeasures

⻬ Communication

Interfaces are Available

⻬ Recording and

Calculation of Data Communication Input

RD5100 series chart recorders are 250 mm (10") hybrid recorders with multi-range input. Innovative design high performance recorder provides high accuracy, ±0.05%; high speed scanning, 0.1 second for 36 points and high speed recording, 1 line in 3

seconds. and PC setting functions drastically improved usability of recording system.

Simple operational keys

Specifications

Input

Number of Measuring Points:

12, 24 and 36 points Input Types: Universal (refer to the

table of inputs) Range Setting: Input type and range

are set with front keys Scale Setting: The minimum and

maximum values and unit are set for each point with front keys

Setting Range: -30,000 to 30,000

Decimal Points: Optional setting

Indication Accuracy: Refer to the table

of inputs on page S-35d

Temperature Drift: 0.1% FS/ 10°C Measuring Period: 0.1 sec/channel Reference Junction Compensation

Accuracy:

K, E, J, T, N, Platinel II: ±0.5°C

(33°F) or less [0°C (32°F) or more when measuring]

R, S, WRe5-WRe26, NiMo-Ni, U, L:

±1.0°C (34°F) or less [only when the ambient temperature is 23°C (73°F) ±5°C (41°F)]

Input Resolution: Approx. 1/40,000 (standard range conversion)

Burnout: Select with/without burnout for each input

Allowable Signal Source Resistance:

Thermocouple Inputs, DC Voltage Input (10 mV): 500Ω or less

(without burnout)

DC Voltage Input (Except 10 mV):

100Ω or less

Resistance Thermometer Inputs:

10Ω or less/ line, three lines are common, Pt100, JPt100

Input Resistance:

Thermocouple Input, DC Voltage Input: Approx. 1MΩ

Maximum Input Applied Voltage:

±20 Vdc Input Correction: Zero/span correction

and shift correction for each channel

Maximum Common Mode Coltage:

30 Vac (support LVD)

Common Mode Rejection Ratio:

130dB

S-35a

RD5110, $6100.

Series Mode Rejection Ratio: 50dB

(only when the peak value of noise is below standard range)

Terminal Board: Detachable type, removable for wire connection

Recording Specifications

Recording System: Raster scan

system, 10-color wire dot printing

Recording and Recording Color:

Analog Recording: Color can be

specified for each channel as required 10 colors (red, purple-red, orange, brown, green, yellow-green, blue-green, purple, purple-blue, black)

Digital Recording and Logging Recording: Black Message Printing: Black List Printing: Black

Chart Paper: Fan-fold type; overall

width 318 mm (12.5"), total length 20 m (65.6'); effective recording width 250 mm (10") (analog recording)

Chart Speed: 1 to 1500 mm/H [in 1 mm/H steps]

Skip Function: Analog recording, digital recording and digital display can be set independently from recording slip

Recording Compensation:

Independent setting of zero spans are available

Display Specifications

Digital Display: Color LCD panel RGB

(640 x 240 dot) Display Size: 149.8 W x 57.4 mm H

(5.8 W x 2.25" H)



Setting Display: Common to digital display*

Display Contents: Digital display

Channel Display: One-point/multiple

points continuous/sequential

indication change

Display Measuring Value of

Each Channel: One-point/multiple

points continuous/sequential

indication change

Clock Display: Hour/Minute/

Second/Tag/Unit

Chart Speed Display Status Display:

Record On: Lights during

recording; LED

Key Lock: Lights during key lock

Alarm: Lights during alarm

activated; LED

Chart End: Lights just before

record ending

Fail: Lights during unit abnormal time

* Sharing LED and setting display

Alarm Specifications

Alarm Display: Occurrence CH No,

data is displayed in red when alarm occurs

Alarm Types: High limit, low limit Alarm Setting Method: Individual

setting for each point four levels/ channels

Alarm Output: See option specification

Setting and Operational Specifications

Key Types, Operation:

Func1: Switching each function

Func2: Switching each function

Enter: Setting a change of parameter

for each mode

Menu: Specifying each setting

function

Esc: Used to escape in the middle

of setting

s: Used to switch channels when

specifying the parameter on cursor

t: Used to switch channels when

specifying the parameter on cursor

: Used to move cursor to the right : Used to move cursor to the left

Rec: Analog recording, digital

recording, printing, switching chart

ON/OFF

DataP: Digital recording of latest data

Feed: Fast-forwarding chart paper

Shift: Specifying key

. _ =: Setting characters of “. _ =”

@ + -: Setting characters of “@ + -”

0 * /: Setting parameter value 0 and

character of “* / ”

1ABC: Setting parameter value 1 and character of “ABC ”

2DEF: Setting parameter value 2 and character of “DEF”

3GHI: Setting parameter value 3 and character of “GHI”

4JKL: Setting parameter value 4 and character of “JKL”

5MNO: Setting parameter value 5 and character of “MNO”

6PQR: Setting parameter value 6 and character of “PQR”

7STU: Setting parameter value 7 and character of “STU”

8VWX: Setting parameter value 8 and character of “VWX”

9YZ: Setting parameter value 9 and character of “YZ”

Recording Operation:

Record On/Off: Recording operation

ON/OFF*

Data Print: Printing measuring data* Feed: Fast-forwarding chart paper

* Two actions are taken to operate

General Specifications

Rated Power Voltage: 100 to 240 Vac

(universal power supply) 50/60Hz

Maximum Power Consumption: 100V A Reference Operating Condition:

Ambient Temperature/Humidity Range: 21 to 25°C (70 to 77°F),

45 to 65% RH

Power Voltage: 90 to 264V Power Frequency: 50/60Hz ±2% Attitude: Forward/Backward/left/right

within 3°

Warm-Up Time: 1 hour or longer

Normal Operating Condition:

Ambient Temperature/Humidity Range: 0 to 40°C (32 to 104°F),

20 to 80% RH

Power Voltage: 90 to 264V Power Frequency: 50/60Hz ±2% Attitude: Forward/backward/left/right

within 3°

Transportation Condition: At the packed condition on shipment from our factory

Ambient Temperature/Humidity Range: -20 to 60°C (-4 to 140°F),

5 to 90%RH (no dew condensation) Vibration: 10 to 60 Hz, 4.9 m (16')/ S2 (0.5G or less) Impact: 392 m (1.3')/S2 (approx. 40G or less)

Storage Condition:

Ambient Temperature: -20 to 60°C

(-4 to 140°F), 5 to 90% RH (no dew condensation)

Working Condition:

Working Temperature Range:

0 to 40°C (32 to 104°F)

Working Humidity Range:

20 to 80% RH

Power Failure Protection:

Programmed parameters stored into EEPROM memory clock circuit sustained for 5 years or longer by a lithium battery (at the operation of 8 hours or longer per day)

Insulation Resistance:

Between Primary Terminals and Protective Conductor Terminals:

20MΩ or more at 500 Vdc

Between Secondary Terminals and Protective Conductor Terminals:

20MΩ or more at 500 Vdc

Between Primary Terminals and Secondary Terminals: 20MΩ or

more at 500 Vdc

Dielectric Strength:

Between Primary Terminals and Protective Conductor Terminals:

1 minute at 1500 Vac

Between Secondary Terminals and Protective Conductor Terminals:

1 minute at 500 Vac

Between Primary Terminals and Secondary Terminals: 1 minute at

1500 Vac

Option Specifications

Options Comments External Drive Chart 3-speed, chart stop, data printing, list

printing, message printing 5 types, operation recording

Alarm Output Mechanical relay: 12, 24, 36 points output,

max contact capacity of 100 to 240 Vac, 3 A resistance load

External Drive Chart 3-speed, chart stop, data printing, list printing,

message printing 5 types, operation recording

Comm Interface RS-422A or RS-485 + Ethernet + 1a contact output

(1a contact output is contact output of mecha relay)

Chart End Output

Chart End relay output when chart paper ended (communication interface is required)

Fail Output Fail relay output when abnormality (communication

interface is required)

Receiving 250Ω (for 20 mA) or 100Ω (for 50 mA) are externally Resistance for mounted to measure current Current Input

S-35b



400 (15.75)

260 (10.24)

380.8 (14.99)

352 (13.86)

28.8 (1.13)

4-M5 The opposite face is the same

245.6 (9.67'') x 385.6 (15.18)

Dimensions: mm (in)

Note 1:

Primary Terminals: Power terminal,

alarm output terminal, output relay

terminal

Secondary Terminals: Measuring

input terminal, communication

terminal, external drive terminal Note 2: When testing insulation

resistance and dielectric strength, please short-circuit every terminals of primary and secondary terminals before the test; test without short-circuiting terminals can damage instruments

Case Assembly Material:

Door (Frame): ABS resin

Front Panel: Soda glass

Back Case: Normal steel Color:

Door (Frame): White (equivalent to

DIC546

Front Panel: Transparent

Back Case: White (equivalent to

DIC546

Mounting: Panel mounting Weight: About 15 kg (33 lb) (full option) Dimensions: 400 W x 260 H x 300 mm D

(15.7 W x 10.2 H x 11.8" D) Panel Cut Dimensions: 388 x 248 mm

(15.2 x 9.7")

Terminal Screws:

Measuring Input, Alarm

Terminals: M3.5

Power, Protective Conductor

Terminal, External Drive Terminal,

Communication Terminal: M4 Chart Paper Illumination: White LED

⁄2)

Communication Interface Specifications

Without With Communication Communication Interface Interface

Specification Ethernet10BASE-T/

100BASE-T, automated recognition, TCP, IP, — HTTP, exclusive

Ethernet protocol

Function Data display, parameter

setting, with browser data display, parameter — setting on exclusive application

Specification RS-422A, RS-485,

Communication protocol: MODBUS communication — specification: 9600 bps

RS-422A to 19200 bps 7E1 to 8N2 RS-485

Function Data display and

parameter setting using exclusive application

Specification Inside of front door, USB1.1, full speed

USB 12 mbps, bulk transfer, Control transfer

Function Parameter setting for exclusive application

S-35c

—

+ 4 hidden pages