Omega Products R44-221-RNKA User Manual



PRESSURE REGULATORS

Port Size: 1/4" Spring Range: 0.3 to 7 bar (5 to 100 psig)

Inlet Pressure: 7 bar (100 psig)

Typical Performance Chart, R44

Air Flow Characteristics

Air Flow

Outlet Pressure

bar

100

psig

0 4 8 12 16 20 scfm

0 4 8 12 16 20 dm3/s

28 (1.1)

Models R44-100/-200 and R44-121/-221

(Aluminum or Brass Body

and Plastic Bonnet)

73 (2.86)

63 (2.46)

23 (0.91)

38 (1.50)

Models R44-133/-233

(Brass Body and

Brass Bonnet)

38 (1.50)

87 (3.41)

26 (1.03)

77 (3.01)

38 (1.50)

FOR COMPRESSED AIR, CARBON DIOXIDE AND INERT GASES

R44 Series

Starts at

R44-221-RNEA, $40, shown actual size.

l Compact Design l High/Low Pressure Models for Primary/

Secondary Regulation

l Plastic Locking Knob for Fast and Easy Adjustment l Regulate Output Pressure From 0.1 to 12 bar

(1 to 175 psig)

l Standard Relieving Models Allow Reduction of

Outlet Pressure When System is Dead-Ended

l Panel or Bracket Mount

The R44 Series are industrial pressure regulators for use with compressed air and inert gases such as carbon dioxide, argon helium, krypton, neon nitrogen and xenon. The R83 models are for primary high pressure regulation, while the R44 models are for secondary low pressure regulation. These regulators are intended for industrial use and are not to be used for beverage dispensing applications.

Dimensions: mm (in)

SPECIFICATIONS

R44 MODELS Operating Temperature: -34 to 66ºC (-30 to 150ºF) Maximum Inlet Pressure: 17 bar (250 psig) Materials R44:

R44-221: Brass body; acetal plastic bonnet R44-233: Brass body, brass bonnet

Valve: Brass/nitrile Seat: Acetal Elastomers: Nitrile

R83 MODELS Operating Temperature: -34 to 60ºC (-30 to 140ºF) Maximum Inlet Pressure: 207 bar (3000 psig) Materials R88: Brass body, zinc bonnet Cartridge Valve: PTFE, brass, stainless steel Diaphram: Acetal/nitrile Seals: Nitrile

C-1



Port Size: 1/4" Spring Range: 0.3 to 8.5 bar (5 to 125 psig)

Inlet Pressure: 69 bar (1000 psig)

Flow

Outlet Pressure

bar

100

psig

Typical Performance Chart, R83

Flow Characteristics - CO

0 2 4 6 8 10 12 scfm

0 1 2 3 4 5 dm3/s

1.90 (48)

53 (2.10)

112 (4.41)

10 (0.40)

Mounting Holes (2 Places)

4.6 (0.18) dia. by 10 (0.39) deep. Use 10-32 thread forming screws.

42 (1.66)

30º

R83-200-RNLA, $65, shown smaller than actual size.

Dimensions: mm (in)

To Order (Specify Model Number)

MODEL NO. PRICE

R44-221-RNAA $40

R44-221-RNEA 40

R44-221-RNKA 40

R44-233-RNAA 45

R44-233-RNEA 45

R44-233-RNKA 45

R83-200-RNEA 65 R83-200-RNLA 65 R83-200-RNNA 65

ACCESSORIES

MODEL NO. PRICE DESCRIPTION

OM-AIR-18-025-003 $7.00 Wall bracket for R44 low pressure regulators OM-AIR-2962-04 3.50 Panel nut for R44 low regulators

Ordering Examples: R44-221-RNEA, low pressure regulator for inert gasses with plastic locking knob for pressure range of 0.3 to 3.5 bar (5 to 50 psig), OM-AIR-18-013-211, pressure gauge 0 to 4 bar (0 to 60 psig), and OM-AIR-18-025-003, wall bracket for R44 regulator, $40 + 14 + 7 = $61.

R83-200-RNNA, high pressure regulator for inert gasses with pressure range 0.7 to 12 bar (10 to 175 psig), and OM-AIR-18-013-209, pressure gauge for 0 to 11 bar (0 to 160 psig), R44-233-RNAA, low pressure regulator with brass adjusting screw for pressure range of 0.1 to 0.7 bar (1 to 10 psig), and OM-AIR-18-013-214, pressure gauge for 0 to 2 bar (0 to 30 psig), $65 + 45 + 14 = $124.

OM-AIR-5095-51 7.00 Neck bracket for R83 high pressure regulators OM-AIR-18-013-214 14.00 40 mm (1.5") pressure gauge with OM-AIR-18-013-211 14.00 40 mm (1.5") pressure gauge with OM-AIR-18-013-212 13.25 40 mm (1.5") pressure gauge with OM-AIR-18-013-208 14.00 50 mm (2") pressure gauge with OM-AIR-18-013-209 13.00 50 mm (2") pressure gauge with

INLET/OUT GAUGE PORT PORT (in) PORT (in)

⁄4

⁄

⁄4

⁄

⁄4

⁄8

⁄

⁄8

⁄

⁄4 High pressure regulator, 0.1 to 3.5 bar (2 to 50 psig)

⁄4 High pressure regulator, 0.3 to 8.5 bar (5 to 125 psig)

⁄4 High pressure regulator, 0.7 to 12 bar (10 to 175 psig)