Omega Products QG-061210-120 User Manual

K-3
U Black Ceran Glass
Emitter Face
U 870°C(1600°F) Maximum
Emitter Face Temperature
U Output Wavelength
Between 2.5 and 6 Microns
U Three Watt Densities
Available: 10, 15, and 20W/In
2
U Uniform IR Coverage
APPLICATIONS
U
Paint Drying
U Plastic Coating Curing U Laminating U Textile Drying U Silk Screen Printing U Thermoforming
CAUTION AND
WARNING!
Fire and electrical shock
may result if products are used
improperly or installed or used by
non-qualified personnel.
OMEGALUX®QG Series heaters use a solid black Ceran™ glass as the emitter face. Maximum power output is 20 Watts/square inch with a maximum operating temperature of 870°C (1600°F) on the face. An optional thermowell from the back of the heater allows for a spring-loaded thermocouple to measure face temperature. This is the best way to use direct temperature control. The heater is available in sizes from 152 x 305 mm (6" x 12") up to 610 x 610 mm (24" x 24"). For medium power applications requiring a cleanable heater surface, the QG Series is ideal. For higher power applications, consider the OMEGALUX
®
QC or QH Series heaters, which have a quartz emitter face. Heaters are assembled using screws as opposed to rivets, allowing for easy replacement of the glass in the field.
From
$
363
Shown with Model HHM59 DMM/ac Clamp Meter/Digital Thermometer, $129
SPECIFICATIONS
Power: 120, 240 and 480 Vac,
120/240 and 240/480 Vac dual voltage, 1 phase
Wattage: 720-8640 Watts Watt Density: 10, 15, and 20 W/in2. Maximum Temperature Emitter
Face: 870°C (1600°F) Housing: Aluminized steel
HIGH TEMPERATURE CERAN GLASS­FACED INFRARED PANEL HEATERS
QG Series
Model No. Price Description
HHM59 $129 Digital Clamp Meter
Complete with wrist strap, 9V battery, carrying case, test leads, type-K beaded wire thermocouple, operator’s manual.
Shown with Model HHM59 DMM/ac Clamp Meter/Digital Thermometer, $129
MADE IN
USA
QG series radiant panel heaters utilize a bayonet fitting for use with a spring loaded thermocouple to measure face temperature, model number OSK1036/BT-090-(*)-4.25-60-1 (*insert thermocouple calibration).
The QF, QC and QH series radiant panel heaters feature built-in 4 mm (5⁄32") ID thermowells which accept
3 mm (1⁄8") diameter probes, as shown in figures A through G.
Without With
Thermowell Thermowell
Width Length Dim. Weight
cm (in.) cm (in.) Wattage Voltage Phase Model Number Price Model Number Price Reference kg (lb)
10 W/in
2
15 (6) 30(12) 720 120 1 QG-061210/120 $363 QG-061210/120-T $388 Fig. A 1.8 (4) 15 (6) 46 (18) 1080 120/240 1 QG-061810 425 QG-061810-T 450 Fig. B 2.7 (6)
15 (6) 61 (24) 1440 120/240 1 QG-062410 488 QG-062410-T 512 Fig. B 3.6 (8) 30(12) 30(12) 1440 120/240 1 QG-121210 488 QG-121210-T 513 Fig. E 3.6 (8) 30(12) 46 (18) 2160 240/480 1 QG-121810 614 QG-121810-T 638 Fig. E 5.4 (12) 30(12) 61 (24) 2880 240/480 1 QG-122410 725 QG-122410-T 750 Fig. E 6.8 (15)
61 (24) 61 (24) 5760 240/480 1 QG-242410 1275 QG-242410-T 1300 Fig. G 6.8 (15)
15 W/in
2
15 (6) 30(12) 1080 120/240 1 QG-061215 363 QG-061215-T 388 Fig. A 1.8 (4)
15 (6) 46 (18) 1620 120/240 1 QG-061815 425 QG-061815-T 450 Fig. B 2.7 (6)
15 (6) 61 (24) 2160 240/480 1 QG-062415 488 QG-062415-T 512 Fig. B 3.6 (8) 30(12) 30(12) 2160 240/480 1 QG-121215 488 QG-121215-T 513 Fig. E 3.6 (8) 30(12) 46 (18) 3240 240/480 1 QG-121815 614 QG-121815-T 638 Fig. E 5.4 (12) 30(12) 61 (24) 4320 240/480 1 QG-122415 725 QG-122415-T 750 Fig. E 6.8 (15)
41 (16) 61 (24) 5760 240/480 1 QG-162415 900 QG-162415-T 925 Fig. F 9.1 (20) 61 (24) 61 (24) 8640 240 1 QG-242415/240 1275 QG-242415/240-T 1300 Fig. G 6.8 (15) 61 (24) 61 (24) 8640 480 1 QG-242415/480 1275 QG-242415/480-T 1300 Fig. G 12.7 (28)
20 W/in
2
15 (6) 30 (12) 1440 120/240 1 QG-061220 363 QG-061220-T 388 Fig. A 1.8 (4)
15 (6) 46 (18) 2160 240/480 1 QG-061820 425 QG-061820-T 450 Fig. B 2.7 (6)
15 (6) 61 (24) 2880 240/480 1 QG-062420 488 QG-062420-T 512 Fig. B 3.6 (8) 30(12) 30 (12) 2880 240/480 1 QG-121220 488 QG-121220-T 513 Fig. E 3.6 (8) 30(12) 46 (18) 4320 240/480 1 QG-121820 614 QG-121820-T 638 Fig. E 5.4 (12) 30(12) 61 (24) 5760 240/480 1 QG-122420 725 QG-122420-T 750 Fig. E 6.8 (15)
41 (16) 61 (24) 7860 240/480 1 QG-162420 900 QG-162420-T 925 Fig. F 9.1 (20)
K-4
K
Each heater comes complete with mounting hardware and complete operator’s manual. To order detachable, bayonet type temperature probe for monitoring heater temperature, order model OSK1036/BT-090-K-41⁄4-60-1, $77 each.
Ordering Example: Model QG-242415/240, 8640 Watt, 61 x 61 cm (24" x 24"), 240 Vac single phase heater, $1275.
To Order
(Specify Model Number)
Note:
QG Series heaters are intended for “radiant” heat. Never let material to be heated come in direct contact with the face of the heater. It is recommended that overtemperature control be used to prevent overheating.
QG Series
In Stock For Fast Delivery
152 (6)
Radiant Surface
79 (3-1/8)
143 (5-1/8)
Aluminized Steel Housing
76 (3)
16 (5/8)
Figure A
152 W x 305 mm L
(6" x 12")
C
L
4 (5/32) I.D.Thermowell 127 (5) Deep
4 (5/32) I.D.
Thermowell
102 (4) Deep
305 (12)
152
(6)
8 (5/16) Lip - 4 sides
38 (1-1/2
)
6 x 508 x 19 (1/4 x 20 x 3/4) Stud [2]
102 x 102 (4 x 4) Junction Box with Cover
Coil Direction
76 (3)
Dimensions shown in mm (inches)
BAYONNET FITTING
152 (6)
4 (5/32) I.D.Thermowell 102 (4) Deep Coil Direction
457 L (18)
76 (3)
8 (5/16) Lip - 4 sides
*This dimension is 76 mm (3) for 152 x 305 mm (6 x 12) panels.
152 mm (6)*
16 (5/8)
4 (5/32) I.D.
Thermowell
143 (4) Deep
152
(6)
38 (1-1/2)
C
L
152 (6)
152 W x 457, 610, 762, 914 or 1219 mm L
Radiant Surface
Aluminized Steel Housing
102 x 102 (4 x 4) Junction Box with Cover
Central Stud on 914 (36) and 1219 (48) Long Models.
Figure B
(6" x 18", 24", 30", 36", 48")
79 (3-1/8)
143 (5-1/8)
.64 cm x 51 cm x 2 cm (1/4" x 20 x 3/4") Stud [2]
Loading...
+ 1 hidden pages