Page 1
HIGH WATT DENSITY, QUARTZ-FACED
INFRARED RADIANT PANEL HEATERS
QC and QH Series
U High Watt Density
QC Series: 40 W/In
QH Series: 60 W/In
2
2
U High Temperature
1800°F (981°C)
U High Purity Fused Quartz
Glass Emitting Face
U Output Wavelength
Between 2.5 and
6 Microns
U Heavy Gauge Aluminized
Steel Housing
CAUTION AND WARNING!
Fire and electrical shock may result
if products are used improperly or
installed or used by non-qualified
personnel. See inside back cover for
additional warnings.
APPLICATIONS
U Textile Drying
U Glass Processing
U Thermoforming
U Film Shrinking
U Powder Coating
U Paint Finishing
OMEGALUX® QH and QC Series
quartz infrared radiant panel
heaters have the most powerful
power output of any infrared panel
heater available. They use a fused
quartz glass face that is grooved
to provide coil support. The QC
series uses a 98% pure fused
quartz and the QH series uses
a 99% pure fused quartz face.
This allows for watt densities
up to 60 W/in2 with a maximum
temperature rating of 1800°F
(981°C). The glass face is
cleanable and can withstand great
thermal shock. The housing is
made of rugged aluminized steel
with the electrical terminal housing
on the back. Mounting studs for
easy installation are provided,
allowing the heaters
to be operated face up or down.
An optional 476 cm (
thermowell is also available for
use with type K thermocouples
for temperature control.
The best application for the QC
and QH series heaters are where
you have little space and need
maximum power. They are made
in building block sizes from 4 x
10" up to 12 x 12", many in dual
voltage models to allow for extra
flexibility in installation.
3
⁄16") i.d. quartz
SPECIFICATIONS
Power: 240 Vac, 240/480 Vac dual
voltage,1 phase
Wattage: 1600 to 8640 W
Watt Density:
QC Series: 40 W/in2
QH Series: 60 W/in
Maximum Temperature Quartz Face:
1800°F (981°C)
Composition of Emitter Face:
QC series: 98% pure fused quartz
QH Series: 99% pure fused quartz
Housing: aluminized steel
2
K-9
Page 2
38 (1.5")
Four 1/4-20 x 19 (0.75")
Studs
38 (1.5")
102 x 102 (4 x 4")
Junction Box with Cover
Two 1/4-20 x 19 (0.75")
Studs
38 (1.5")
Aluminized
Stainless Housing
127
(5")
A
Radiant
Surface
Dimensions: mm (inch)
Width
inch
(cm)
40 W/in
4 (10) 10 (25) 1600 240 1
6 (15) 10 (25) 2400 240/480 1
8 (20) 10 (25) 3200 240/480 1
10 (25) 10 (25) 4000 240/480 1
12 (30) 10 (25) 4800 240/480 1
6 (15) 12 (30) 2880 240/480 1
12 (30) 12 (30) 5760 240/480 1
60 W/in
4 (10) 10 (25) 2400 240/480 1
6 (15) 10 (25) 3600 240/480 1
8 (20) 10 (25) 4800 240/480 1
10 (25) 10 (25) 6000 240/480 1
12 (30) 10 (25) 7200 240/480 1
6 (15) 12 (30) 4320 240/480 1
12 (30) 12 (30) 8640 240/480 1
Comes complete with electrical and mounting hardware, and operator’s manual.
Ordering Example: QC-061040-T, 40 W/in
** Thermowell accepts
Length
inch
(cm)
2
QC Series
2
QH Series
Wattage
3
⁄16" diameter probes.
Voltage
2
, 240 W, dual voltage 240/480 Vac heater with optional thermowell.
Phase
Coil Direction
Without Thermowell
Model No.
QC-041040 QC-041040-T
QC-061040 QC-061040-T
QC-081040 QC-081040-T
QC-101040 QC-101040-T
QC-121040 QC-121040-T
QC-061240 QC-061240-T
QC-121240 QC-121240-T
QH-041060 QH-041060-T
QH-061060 QH-061060-T
QH-081060 QH-081060-T
QH-101060 QH-101060-T
QH-121060 QH-121060-T
QH-061260 QH-061260-T
QH-121260 QH-121260-T
127
(5")
254 (10")
0.48 (0.1875") ID
Quartz Thermowell
(when specified)
19 (0.75")
With Thermowell
Model No.
k
Weight
lb (kg)
3 (1.4)
4 (1.8)
5.5 (2.5)
7 (3.2)
8.3 (3.8)
5 (2.3)
10 (4.5)
3 (1.4)
4 (1.8)
5.5 (2.5)
7 (3.2)
8.3 (3.8)
5 (2.3)
10 (4.5)
K-10
Loading...