PRECISION MICRO-MACHINED SILICON
TRANSDUCERS AND TRANSMITTERS
0.08% Accuracy
Standard
Gauge Pressure, Absolute, Vacuum,
Compound and Barometric Ranges
±25 mbar to 0-350 bar Ranges
10 mV/V, 0 to 10 Vdc or 4-20 mA Outputs
PXM409 Series
CAL
CERT
Cable style.
mini DIN
style.
M12
connector
style.
B
U 5-Point Agency Traceable
Calibration Included
U Gauge, Compound Gauge,
Absolute, Vacuum and
Barometric Pressure
Ranges Available
U Welded Stainless Steel
Construction
U 316 SS Wetted Parts
U Premium Temperature
Performance
U Broad Compensated
Temperature Range
U Ruggedized with
Secondary Containment
The PXM409 Series use a micromachined piezoresistive silicon
element for high accuracy and all
stainless steel wetted parts for
durability and superior chemical
compatibility. Their high accuracy
combined with very high thermal
compensation (0.7% Typ.) over
the compensated range make the
PXM409 series ideal for scientific
or industrial applications requiring
a rugged, high accuracy transducer
with very low thermal drift. They
can be used in test benches,
laboratory testing, engine testing,
ground test stations and other
industrial applications requiring
PXM409-001BGV,
shown smaller
than actual size.
durable, precision transducers.
Their standard accuracy is a high
industrial grade accuracy of 0.08%.
The modular construction allows
for fast delivery of most models
(typically 2-week maximum).
Models are available with gauge
(relative), compound gauge,
absolute, vacuum (negative gauge)
and barometric pressure ranges.
PXM419-007BGI,
shown smaller
than actual size.
SPECIFICATIONS
Accuracy: Standard ±0.08% FS, BSL,
linearity, hysteresis and repeatability
combined (compound ranges calibrated
only in positive direction)
Operating Temperature:
mV/V Output: -45 to 121°C
(-49 to 250°F)
Amplified Output: -45 to 115°C
(-49 to 239°F)
Compensated Temperature Range:
25 to 350 mB: -18 to 85°C
(0 to 185°F)
1 to 350 bar: -29 to 85°C
(-20 to 185°F)
B-1
PXM459-002BAV,
shown smaller
than actual size.
PXM409: 2 m (6.6')
cable IP67 rating
PXM459: M12 connector
IP67 rating, absolute
IP65 rating, gauge
PXM419: mini DIN
IP67 rating, absolute
IP65 rating, gauge
Thermal Accuracy: % span shift over
Product Label
Hex 22 (0.87) AF M12
M12 Pressure Fitting
22
(0.88)
79 (3.1)
Conduit back end PXM409C
Integral cable back end PXM409
28
(1.1)
5
(0.2)
Twist lock back end PXM459
Vent with
porous plug
(gage units only)
mini DIN back end PXM419
5
(0.2)
M1 2x1
Ø 20.2
0.8
5
(0.2)
Vent with porous plug
(gage units only)
Glass to medal sealed pins PXM449
5
(0.2)
Conduit back end PXM409C
Integral cable back end PXM409
28
(1.1)
5
(0.2)
Twist lock back end PXM459
Vent with
porous plug
(gage units only)
mini DIN back end PXM419
5
(0.2)
M1 2x1
Ø 20.2
0.8
Vented
through cable
Ø 20.2
(0.8)
2
(0.2)
2
onnector
Conduit back end PXM409C
28
(1.1)
5
(0.2)
5
(0.2)
M1 2x1
Ø 20.2
0.8
compensated temperature range
25 to 350 mB:
Zero: ±1.0% max
Span: ±1.0% max
1 to 350 bar:
Zero: ±0.50% max
Span: ±0.50% max
ROHS Compliant
Minimum Isolation Between Case
and Terminations: 100 MΩ @ 50 Vdc
Pressure Cycles: 1 million, minimum
Long Term Stability (1-Year):
±0.1% FS typical
Shock: 50 g, 11 mS half sine shock,
vertical and horizontal
Vibration: 5-2000-5 Hz 30 minute
cycle, Curve L, Mil Spec 810 figure
514-2-2, vertical and horizontal
Bandwidth: DC to 1 kHz typical
Response Time: <1 ms
CE Compliant: Industrial Level
Emissions: IEC550022 Class B
Electrostatic Discharge Immunity:
IEC1000-4-2
EM Field Immunity: IEC61000-4-3
EFT Immunity: IEC61000-4-4
Surge Immunity: IEC61000-4-5
Conducted RF: IEC610000-4-6
Rate Power Frequency Magnetic
Field: IEC61000-4-8
Environmental Protection:
PXM409: IP67
PXM419: IP65 gauge, IP67 Abs
PXM459: IP65 gauge, IP67 Abs
Proof Pressure Gauge/
Vac/Compound:
25 mB: 10 times span
70 mB: 6 times span
170 mB to 100 bar: 4 times span
175 to 350 bar: to 500 bar max
Proof Pressure Absolute:
350 mB to 100 bar: 4 times span
175 to 350 bar: to 500 bar max
Secondary Containment;
Gauge/Vac/Compound:
25 to 350 mB: to 70 bar
1 to 70 bar: to 200 bar
100 to 350 bar: to 700 bar
Absolute/Barometric:
350 mB: to 70 bar
1 to 70 bar (Includes Barometric
Ranges): to 200 bar
100 to 350 bar: to 700 bar
Wetted Parts: 316L SS
Electrical Terminations
PXM409: 2 m (6.6') cable
PXM419: mini DIN with mating
connector
PXM459: M12 4-pin
Pressure Port: G
1
⁄4 standard
Weight: 115 to 200 gm depending upon
configuration
Electrical Outputs
mV/V Output:
Output: 10 mV/V ratiometric
Supply Voltage: 5 to 10 Vdc
(5 mA @ 10 Vdc)
Zero Balance:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ
(2% max)
Span Setting:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ
(2% max)
Input/Outut Resistance: 5000 Ω ±20%
Voltage Output:
Output: 0 to 10 Vdc
Supply Voltage: 15 to 30 Vdc @
10 mA (±10 Vdc or compound)
Zero Balance:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ
(2% max)
Span Setting:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ (2% max)
Current Output:
Output: 4 to 20 mA (zero pressure =
12 mA on compound ranges)
Supply Voltage: 9 to 30 Vdc (9 to
20 Vdc above 105°C) max loop
resistance = (Vs-9) x 50 O
Zero Balance:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ
(2% max)
Span Setting:
Ranges > 170 mB: ±0.5% typ
(1% max)
Ranges ≤ 170 mB: ±1% typ
(2% max)
Integral cable back end PXM409
5
(0.2)
mini DIN back end PXM419
5
(0.2)
(gauge units only)
Vent with porous plug
Vent with porous plug
(gauge units only)
(gage units only)
PXM419/PXM459 PINOUT
1 + EXC + EXC + Supply
2 – EXC Common – Supply
Vent with
porous plug
3 + SIG + Output NC
4 – SIG NC NC
Dimensions: mm (inch)
Ø = diameter
PXM409 CABLE CONNECTION
Color mV 5/10V mA
Black – EXC Common – Supply
White + SIG + Output NC
Green – SIG NC NC
Red + EXC + EXC + Supply
PIN mV 5/10V mA
Hex 22 (0.87) AF M12
M12 Pressure Fitting
M12 Pressure Fitting
B-2
Product Label
Hex 22 (0.87) AF
G1⁄4 Pressure
Fitting
G1⁄4 Pressure
Hex 25 (1.0) AF
Fitting
(0.88)
79 (3.1)
PXM409 Series pressure ranges
>1 bar to 70 bar for pressure ranges
above 70 bar consult factory.
PXM409 Series pressure
ranges 1 bar and below.
79 (3.1)
(0.88)
22
22