Omega Products PX270 Installation Manual

Static Pressure Probe

PX270

M1447/0303

SPECIFICATIONS

Material: 6061T-6 aluminum alloy

Port Connection: ¼-inch brass hose barb

Gasket Material: Neoprene

Probe Length: 4” or 8”

Maximum Pressure: 10

Maximum Temperature: 250°

Maximum Air Flow: Unlimited

Weight: 1.5 oz. (46.7 grams)

PSIG

C

MOUNTING

1. Drill a ½-inch hole into the sheet metal.

2. Insert the probe.

3. Use the fla nge mount ing holes as a templ ate to mar k

and drill two holes.

4. Fasten the probe with two sheet metal screws (not
provided).

DIMENSIONS

Servicing Europe:

OMEGAnet

www.omega.com

USA:

ISO 9001 Certi fied

Canada:

For immediate technical or application

USA and Canada:

Mexico:



Online Service

Internet e-mail

[e-mail]

Benelux:

Czech Republic:

Servicing North America:

One Omega Drive, P.O. Box 4047
Stamford, CT 06907-0047
TEL: [phone] FAX: [phone]
e-mail: [e-mail]

976 Bergar
Laval (Quebec) H7L 5A1
TEL: [phone] FAX: [phone]
e-mail: [e-mail]

France:

Germany/Austria:

United Kingdom:

ISO 9002 Certifi ed

assistance:

Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
Customer Service: 1-800-622-2378 / 1-800-622-BEST
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

TEL: [phone] FAX: [phone]
En Espanol: [phone]-7803 e-mail: [e-mail]

It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of
its products in the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in t his document is b elieved to be correct but OMEGA Engineering, Inc. accepts no liabili ty for any errors it contains, and rese rves the right to a lter
specificatio ns without notice .
WARNING: These product s are not designe d for use in, and shoul d not be used for, patient con nected applica tions.

SM

SM

SM

SM

[e-mail]

Postbus 8034, 1180 LA Amstelveen, The Netherlands
TEL: [phone] FAX: [phone]
Toll Free in Benelux: 06 0993344
e-mail: [e-mail]

Rude armady 1868, 73301 Karvina
TEL: [phone] FAX: [phone]
Toll Free in Czech Republic: 0800-1-66342
e-mail: czech@omega. com

9, rue Denis Papin, 78190 Trappes
TEL: [phone] FAX: [phone]
Toll Free in France: 0800-4-06342
e-mail: [e-mail]

Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: [phone] FAX: [phone]

Toll Free in Germany: 0800 TC OMEGA
e-mail: [e-mail]

P.O. Box 7, Omega Drive
Irlam, Manchester
M44 5EX, United Kingdom
TEL: [phone] FAX: [phone]
Toll Free in England: 0800 488 488
e-mail: [e-mail]

SM

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA Warranty adds an additional one
(1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit should malfunction, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone
or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY
is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components which wear are not warranted, including but not limited to contact
points, fuses, and triacs.

OMEGA is please d to offer suggestions on the use of its various products. However, OMEGA neither a ssumes responsibility for any omissions or errors nor assumes
liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that
the parts manufactured by it will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER,
EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HER EBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OME GA with respect to
this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, sha ll not exceed the purchase price of the component u pon
which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity;
or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way,
OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any
liability or damage whatsoever arising out of the use of the Product(s) in such a manner.

RETURN REQUESTS/INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked
on the outside of the return package and on any correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

FOR WARRANTY RETURNS, please have the following information available BEFORE
contacting OMEGA:

1. Purchase Order number under which the p roduct was PURC HASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the product.

FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the
following information available BEFORE contacting OMEGA:

1. Purchase Order number to cover the COST of the repair,

2. Model and serial number of the product , and

3. Repair instructions and/or specific problems relative to the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.

OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

© Copyright 2003 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduc ed to any electronic
medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.