Rugged Design
The Model PX2421 marine pressure
transducer has been designed to
meet the stringent requirements of
military standard MIL-P-24212C(SH).
Applications include naval
shipboard use, both surface and
sub-surface vessels, as well as
general maritime uses.
The Model PX2421 marine transducer
is available in pressure ranges from
15 to 10,000 psi. The transducer is
powered by 115 Vac, 60 Hz, single
phase power. The rugged electronics
provide a 4 to 20 mA (2 wire current)
output signal proportional to the input
pressure measured that can be used
for recording or control purposes.
Direct Replaceability
The Model PX2421 has been
designed to be directly
interchangeable with existing
115 Vac powered pressure
transducers designed to the
MIL-P-24212C(SH) standard.
QPL Approved to
MIL-P-24212C(SH) for AC
Input Power Applications
Pressure Connections
per MS16142
Non-Interacting Zero
and Span Adjustments
Mounting Interchangeable
with Existing
MIL-P-24212C(SH)
Approved Products
Convenient Calibration
Test Points for Easy
System Function
Verification
Modular Design
for Easy Field Servicing
Rugged Sputtered
Thin Film Sensor
State-of-the-Art Electronics
All Mating Connectors
Included
Model PX2421
4 to 20 mA Output
115 AC Powered
0 to 10,000 psi
Shown
Actual
Size
Marine Pressure Transducer
QPL Approved to MIL-P-24212C(SH)
SPECIFICATIONS
Applications: seawater, steam, oil,
freshwater, condensate, other gases
Output: 4 to 20 mA
Power Supply: 115 Vac, 60 Hz,
Single Phase
Loop Resistance: 0 to 250 Ω
Zero/Span Adjustments: 10% FSO
Temperature: Compensated
0 to 65°C (32 to 149°F)
Overpressure: 200% of range
Humidity: In accordance with
MIL-P-24212C(SH)
Accuracy: ±1.0% of calibrated span
inclusive of linearity, hysteresis and
temperature effects
Repeatability:
±0.5% of calibrated span
Shock: In accordance with
MIL-P-24212C(SH)
Vibration: In accordance with
MIL-P-24212C(SH)
EMI: In accordance with
MIL-P-24212C(SH)
Weight: 1.4 kg (3.1 lb)
Mating Connector: Cable
MS3106F14S-5S, included
Special
Low Pressure
Ranges Available!
Consult Engineering
for Details.
OMEGADYNE
CEC Pressure Products
OMEGADYNE, INC.: Cage - 09AL6
CEC Pressure Products: Cage - 09384
Transamerica/CEC: Cage - 09384
Bell and Howell/CEC: Cage - 14028
T-Hydronics: Cage - 8W004
Thurman Hydronics: Cage - 11051
OMEGA ENGINEERING, INC.: Cage - 29907
Vanzetti Systems Inc: Cage - 50973
NEWPORT ELECTRONICS, INC.:
Cage - 32873
Marine Pressure Transducer
QPL Approved to MIL-P-24212C(SH)
To Order (Specify Model Number)
MIL SPEC PGT GP 30 G 4
OMEGADYNE A019265 30 G
CONNECTION OPTIONS
OMEGADYNE ONLY
SEE DRAWING A019265
TYPE
MIL SPEC
OMEGADYNE 1, 2, 1, 1
A019265 PGT
A019265 PCT
A019265 PVT
APPLICATION
DIAPHRAGM MIL SPEC
MATERIAL OMEGADYNE 1, 2, 1, 4
INCONEL GP GP
INCONEL SW SW
RANGE
MIL SPEC
PRESSURE* OMEGADYNE 1, 2, 1, 3
0-5 5 5
0-15 15 15
0-30 30 30
0-50 50 50
0-60 60 60
0-75 75 75
0-100 100 100
0-150 150 150
0-200 200 200
0-300 300 300
0-500 500 500
0-600 600 600
0-1000 1000 1000
0-1500 1500 1500
0-3000 3000 3000
0-5000 5000 5000
0-6000 6000 6000
0-10000 10000 10000
30"Hg-0-15 VAC-15 0-30/0-15
30"Hg-0-30 VAC-30 0-30/0-30
30"Hg-0-100 VAC-100 0-30/0-100
30"Hg-0-150 VAC-150 0-30/0-150
0-30"Hg VAC 30
POWER SUPPLY
MIL SPEC
OMEGADYNE 1, 2, 1, 5
DEFINED BY 4
PART NO.
REFERENCE
MIL SPEC
OMEGADYNE 1, 2, 1, 4
G G (GAGE)
A A (ABS.)
S S (SEAL REF.)
B
C
D
E
A
156
(6.125)
Ø9.5
(Ø.375)
137
(5.375)
49.2
(1.938)
98.4
(3.875)
5 PIN ELECTICAL CONNECTOR
#MS3102R14S-5PX
CONNECTOR
CAP #9760-14
OPTIONAL
30.2
(1.19)
79.4
(3.125)
USE NO OIL FOR
DO NOT LUBRICATE
CALIBRATION
6.4
(.250)
17.5
(.688)
PRESSURE PORT
CAP PLUG FOR
PRESSURE PORT
PDO-104
PER MS16142
1/4" OD TUBE
24.9
(.983)
DIMENSIONS
© COPYRIGHT 2004 OMEGADYNE INC. ALL RIGHTS RESERVED
MANY MODELS AVAILABLE FOR FAST DELIVERY!
*Optional pressure ranges available.
Consult factory for details.
Ordering Example: PGT-GP-30-G-4,
Mil-P-24212C(SH) qualified pressure
transducer, type GP, 0 to 30 psi gage
pressure range and powered by 115 Vac.
Consult sales for current pricing.
DIMENSIONS: mm (inches)
OMEGADYNE
CEC Pressure Products