Omega Products PX209-015A5V User Manual

RUGGED SOLID STATE TRANSDUCERS

WITH AMPLIFIED OUTPUTS

STANDARD AND METRIC MODELS

EX

C

LU

SI

V

E!

PX209 Series

0-15 to 0-300 psi-Standard Units
0-1 to 0-20 bar-Metric Units
Gage, Absolute, and
Compound Ranges

Starts at

$

215

Standard

⻬ Stainless Steel

Fitting and Body

⻬ 5-Point NIST-Traceable

Calibration Included

⻬ Solid State Media

Isolation (Suitable for
Use with Many Industrial
Liquids and Gases)

⻬ Broad Temperature-

Compensated Range
of -20 to 80°C
(-4 to 176ºF) Yields High
Stability with Changing
Temperatures

⻬ Electrical Isolation to

100 MΩ Ensures Long­Term Reliability

⻬ Rugged High Shock and

Vibration Design for
Tough OEM Applications

⻬ 100,000 Hr MTBF Typical

Based on proprietary sensor
technology developed by OMEGA
to meet the high reliability and
accuracy demanded by aerospace
applications, the PX209/PXM209
Series voltage and current output
pressure transducer offers superior
performance in non-corrosive
applications, including:
engine/powertrain testing, well
monitoring, and ground and race
water monitoring. The transducer
uses a 4-active-arm bridge sensor

PX209-100G5V,
$215, shown
actual size.

PX219-100G5V,
$215, shown
actual size.

with a micro-machined diffused
silicon diaphragm and proprietary
thin-film media, plus dielectric
isolation barriers.

This same core sensing element
technology, which includes multiple
types of signal conditioning and the
ability to survive extremes of shock
and vibration, provides a modular
building block for OMEGA’s
revolutionary family of
pressure-sensing instruments.

SPECIFICATIONS

Voltage Output

Excitation: 24 Vdc @ 15 mA

5 Vdc Output: 7 to 35 Vdc
10 Vdc Output: 12 to 35 Vdc

Output: 0 to 5 Vdc or 0 to 10 Vdc,

±1.5% FSO, 3-wire

Zero Balance: 0 Vdc ±2% FSO

4 to 20 mA Output

Excitation: 24 Vdc (7 to 35 Vdc)

reverse polarity protected

Output: 4 to 20 mA (2-wire) ±1% FSO
Zero Balance: 4 mA ±2% FSO

Max Loop Resistance:

50 x (supply voltage - 10) Ω

B-90

Cable style.

Based on proprietary solid
state sensor technology
originally used in
aerospace applications.

Connector
included.

mini DIN
style.

Common Specifications

Accuracy: 0.25% FS (including

linearity, hysteresis and repeatability)

Operating Temperature:

-54 to 121°C (-65 to 250°F)

Compensated Temperature:

-20 to 80°C (-4 to 176°F)

Thermal Effects:

0.04% FS/°C (0.02% FS/°F)

Proof Pressure: 150%
Burst Pressure: 300% range max
Response Time: 2 ms typical
Vibration Sensitivity: At 20 g

peak sinusoidal vibration from
10 Hz to 2000 Hz (
shall not exceed 0.04% FS/g for 15 psi
range to 0.005% FS/g for 100 psi and
above

Natural Frequency: >35 kHz
for 100 psi range

Gage Type: Diffused silicon
strain gages

Wetted Parts: 316 SS,
borosilicate glass, silicon
nitride, epoxy

Pressure Port: See dimensional
drawing on page B-150

Electrical Connections:

PX209/PXM209: 1 m (36") shielded

4-conductor cable
PX219/PXM219: DIN 40050 plug

connector supplied

Weight: 128 g (4.5 oz)

1

⁄2" D.A.), the output

PRESSURE TRANSDUCERS

VOLTAGE OUTPUT

B

STANDARD MODELS

AVAILABLE FOR FAST DELIVERY!

To Order (Specify Model Number)

psi bar CABLE STYLE PRICE CONN. STYLE PRICE COMPATIBLE METERS*

GAGE PRESSURE RANGES (psig) WITH 0 TO 5 Vdc OUTPUT

0 to 15 0 to 1.0 PX209-015G5V $215 PX219-015G5V $215 DPi8, DP41-E, DP25B-E
0 to 30 0 to 2.1 PX209-030G5V 215 PX219-030G5V 215 DPi8, DP41-E, DP25B-E

0 to 60 0 to 4.1 PX209-060G5V 215 PX219-060G5V 215 DPi8, DP41-E, DP25B-E
0 to 100 0 to 6.9 PX209-100G5V 215 PX219-100G5V 215 DPi8, DP41-E, DP25B-E
0 to 200 0 to 13.8 PX209-200G5V 215 PX219-200G5V 215 DPi8, DP41-E, DP25B-E

to 300 0 to 20.7 PX209-300G5V 215 PX219-300G5V 215 DPi8, DP41-E, DP25B-E

0

ABSOLUTE PRESSURE RANGES (psia) WITH 0 TO 5 Vdc OUTPUT

0 to 15 0 to 1.0 PX209-015A5V $235 PX219-015A5V $235 DPi8, DP41-E, DP25B-E

0 to 30 0 to 2.1 PX209-030A5V 235 PX219-030A5V 235 DPi8, DP41-E, DP25B-E

0 to 60 0 to 4.1 PX209-060A5V 235 PX219-060A5V 235 DPi8, DP41-E, DP25B-E
0 to 100 0 to 6.9 PX209-100A5V 235 PX219-100A5V 235 DPi8, DP41-E, DP25B-E
0 to 200 0 to 13.8 PX209-200A5V 235 PX219-200A5V 235 DPi8, DP41-E, DP25B-E
0 to 300 0 to 20.7 PX209-300A5V 235 PX219-300A5V 235 DPi8, DP41-E, DP25B-E

VACUUM AND COMPOUND RANGES WITH 0 TO 5 Vdc OUTPUT

-14.7 to 0 -1 to 0 PX209-30VAC5V $235 PX219-30VAC5V $235 DPi8, DP41-E, DP25B-E

-14.7 to 15 -1 to 1.0 PX209-30V15G5V 235 PX219-30V15G5V 235 DPi8, DP41-E, DP25B-E

-14.7 to 45 -1 to 3.1 PX209-30V45G5V 235 PX219-30V45G5V 235 DPi8, DP41-E, DP25B-E

-14.7 to 85 -1 to 5.9 PX209-30V85G5V 235 PX219-30V85G5V 235 DPi8, DP41-E, DP25B-E

-14.7 to 135 -1 to 9.3 PX209-30V135G5V 235 PX219-30V135G5V 235 DPi8, DP41-E, DP25B-E

Comes complete with 5-point NIST calibration certificate.
See pages B-149 and B-150 for PX209 units with 4 to 20 mA output.

Note: To order 0 to 10 Vdc output, replace “5V” suffix with “10V” (no extra charge).
Ordering Example: PX219-015G5V, 0 to 5 Vdc output transducer for gage pressure with a 0 to 15 psia range, PS-4G snubber for gasses and

TX4-100 shielded wire, $215 + 12.75 + 35.00 = $262.75.

STANDARD ACCESSORIES

MODEL PRICE DESCRIPTION

PS-4G $12.751⁄4 NPT pressure

snubber for
gaseous media

PS-4E 12.751⁄4 NPT pressure

snubber for water
and light oils

PS-4D 12.751⁄4 NPT pressure

snubber for
dense liquids
(motor oil)

TX4-100 35.00 30 m (100') of

4-conductor
shielded wire

METRIC ACCESSORIES

MODEL PRICE DESCRIPTION

PS-4G-MG $12.75 G1⁄4 pressure

snubber for
gaseous media

PS-4E-MG 12.75 G1⁄4 pressure

snubber for water
and light oils

PS-4D-MG 12.75 G1⁄4 pressure

snubber for
dense liquids
(motor oil)

TX4-100 35.00 30 m (100') of

4-conductor
shielded wire

Order a snubber to protect

your pressure transducer!

PS-4G, $12.75,
shown smaller

than actual size.

METRIC MODELS

To Order (Specify PXM209 for Cable or PXM219 for DIN Connector)

bar psi CABLE STYLE PRICE CONN. STYLE PRICE

GAGE PRESSURE RANGES (bar) WITH 0 to 10 Vdc OUTPUT

0 to 1.0 0 to 15 PXM209-001G10V $215 PXM219-001G10V $215 DPi8, DP41-E, DP25B-E
0 to 1.6 0 to 23 PXM209-1.60G10V 215 PXM219-1.60G10V 215 DPi8, DP41-E, DP25B-E
0 to 2.5 0 to 36 PXM209-2.50G10V 215 PXM219-2.50G10V 215 DPi8, DP41-E, DP25B-E
0 to 4.0 0 to 58 PXM209-004G10V 215 PXM219-004G10V 215 DPi8, DP41-E, DP25B-E

0 to 6.0 0 to 87 PXM209-006G10V 215 PXM219-006G10V 215 DPi8, DP41-E, DP25B-E
0 to 10.0 0 to 145 PXM209-010G10V 215 PXM219-010G10V 215 DPi8, DP41-E, DP25B-E
0 to 16.0 0 to 232 PXM209-016G10V 215 PXM219-016G10V 215 DPi8, DP41-E, DP25B-E
0 to 20.0 0 to 290 PXM209-020G10V 215 PXM219-020G10V 215 DPi8, DP41-E, DP25B-E

ABSOLUTE PRESSURE RANGES (bar) WITH 0 to 10 Vdc OUTPUT

0 to 1.0 0 to 15 PXM209-001A10V $235 PXM219-001A10V $235 DPi8, DP41-E, DP25B-E

0 to 1.6 0 to 23 PXM209-1.60A10V 235 PXM219-1.60A10V 235 DPi8, DP41-E, DP25B-E

0 to 2.5 0 to 36 PXM209-2.50A10V 235 PXM219-2.50A10V 235 DPi8, DP41-E, DP25B-E

0 to 4.0 0 to 58 PXM209-004A10V 235 PXM219-004A10V 235 DPi8, DP41-E, DP25B-E

0 to 6.0 0 to 87 PXM209-006A10V 235 PXM219-006A10V 235 DPi8, DP41-E, DP25B-E
0 to 10.0 0 to 145 PXM209-010A10V 235 PXM219-010A10V 235 DPi8, DP41-E, DP25B-E
0 to 16.0 0 to 232 PXM209-016A10V 235 PXM219-016A10V 235 DPi8, DP41-E, DP25B-E
0 to 20.0 0 to 290 PXM209-020A10V 235 PXM219-020A10V 235 DPi8, DP41-E, DP25B-E

VACUUM AND COMPOUND RANGES (bar) WITH 0 to 10 VdcOUTPUT

VAC to 0 VAC to 0
VAC to 1 VAC to 15
VAC to 3 VAC to 45
VAC to 6 VAC to 87
VAC to 9

Comes complete with 5-point calibration. * See section D for compatible meters.
Note: The voltage output versions of the vacuum and compound sensors generate 0 Vdc at vacuum

and 5Vdc or 10 Vdc at full scale.
Ordering Example: PXM219-001G10V, 0 to 10 Vdc output transducer for gage pressure with

a 0 to 1 bar range, PS-4G-MG snubber and TX4-100 shielded wire, $215 + 12.75 + 35 = $262.75.

VAC to 131

PXM209-VAC000G10V
PXM209-VAC001G10V
PXM209-VAC003G10V
PXM209-VAC006G10V
PXM209-VAC009G10V

$235

PXM219-VAC000G10V

235

PXM219-VAC001G10V

235

PXM219-VAC003G10V

235

PXM219-VAC006G10V

235

PXM219-VAC009G10V

B-92

See section D for compatible meters.

*

AVAILABLE FOR FAST DELIVERY!

COMPATIBLE METERS*

$235 DPi8, DP41-E, DP25B-E

235 DPi8, DP41-E, DP25B-E
235 DPi8, DP41-E, DP25B-E
235 DPi8, DP41-E, DP25B-E
235 DPi8, DP41-E, DP25B-E

RUGGED SOLID STATE TRANSDUCERS

WITH AMPLIFIED OUTPUTS

STANDARD AND METRIC MODELS

EX

C

LU

SI

V

E!

PX209/PXM209 Series

0-15 to 0-300 psi-Standard Units
0-1 to 0-20 bar-Metric Units
Gage, Absolute, and
Compound Ranges

Starts at

$

235

tandard

S

⻬ Stainless Steel

Fitting and Body

⻬ 5-Point NIST-Traceable

Calibration Included

⻬ Solid State Media

Isolation (Suitable for
Use with Many Industrial
Liquids and Gases)

⻬ Broad Temperature-

Compensated Range
of -20 to 80°C
(-4 to 176ºF) Yields High
Stability with Changing
Temperatures

⻬ Electrical Isolation to

100 MΩ Ensures Long­Term Reliability

⻬ Rugged High Shock and

Vibration Design for
Tough OEM Applications

⻬ 100,000 Hr MTBF Typical

Based on proprietary sensor
technology developed by OMEGA
to meet the high reliability and
accuracy demanded by aerospace
applications, the PX209/PXM209
Series voltage and current output
pressure transducer offers superior
performance in non-corrosive
applications, including:
engine/powertrain testing, well
monitoring, and ground and race
water monitoring. The transducer
uses a 4-active-arm bridge sensor

PX209-100GI,
cable style, $235,
shown actual size.

PX219-100GI,
connector style,
$235, shown
actual size.

with a micro-machined diffused
silicon diaphragm and proprietary
thin-film media, plus dielectric
isolation barriers.

This same core sensing element
technology, which includes multiple
types of signal conditioning and the
ability to survive extremes of shock
and vibration, provides a modular
building block for OMEGA’s
revolutionary family of
pressure-sensing instruments.

SPECIFICATIONS

Voltage Output

Excitation: 24 Vdc @ 15 mA

5 Vdc Output: 7 to 35 Vdc
10 Vdc Output: 12 to 35 Vdc

Output: 0 to 5 Vdc or 0 to 10 Vdc,

±1.5% FSO, 3-wire

Zero Balance: 0 Vdc ±2% FSO

4 to 20 mA Output

Excitation: 24 Vdc (7 to 35 Vdc)

reverse polarity protected

Output: 4 to 20 mA (2-wire) ±1% FSO
Zero Balance: 4 mA ±2% FSO

Max Loop Resistance:

50 x (supply voltage - 10) Ω

B-149

Cable style.

Based on proprietary solid
state sensor technology
originally used in
aerospace applications.

mini DIN
style.

Common Specifications

Accuracy: 0.25% FS (including

linearity, hysteresis and repeatability)

Operating Temperature:

-54 to 121°C (-65 to 250°F)

Compensated Temperature:

-20 to 80°C (-4 to 176°F)

Thermal Effects:

0.04% FS/°C (0.02% FS/°F)

Proof Pressure: 150%
Burst Pressure: 300% range max
Response Time: 2 ms typical
Vibration Sensitivity: At 20 g

peak sinusoidal vibration from
10 Hz to 2000 Hz (
shall not exceed 0.04% FS/g for 15 psi
range to 0.005% FS/g for 100 psi and
above

Natural Frequency: >35 kHz
for 100 psi range

Gage Type: Diffused silicon
strain gages

Wetted Parts: 316 SS,
borosilicate glass, silicon
nitride, epoxy

Pressure Port: See dimensional
drawing on page B-91

Electrical Connections:

PX209/PXM209: 1 m (36") shielded

4-conductor cable
PX219/PXM219: DIN 40050 plug

connector supplied

Weight: 128 g (4.5 oz)

1

⁄2" D.A.), the output

PRESSURE TRANSDUCERS

CURRENT OUTPUT

B

Cable style.

STANDARD

PX209-100GI,
$215, shown
smaller than
actual size.

Order a snubber

to protect your

pressure transducer!

PS-4G, $12.75, shown actual size.

STANDARD ACCESSORIES

MODEL PRICE DESCRIPTION

PS-4G $12.751⁄4 NPT pressure

PS-4E 12.751⁄4 NPT pressure

PS-4D 12.751⁄4 NPT pressure

TX4-100 35.00 30 m (100') of

METRIC ACCESSORIES

MODEL PRICE DESCRIPTION

PS-4G-MG $12.75 G1⁄4 pressure

PS-4E-MG 12.75 G1⁄4 pressure

PS-4D-MG 12.75 G1⁄4 pressure

TX4-100 35.00 30 m (100') of

Recommended Reference Video:
Pressure, Industrial Measurement

Series,

VT-1005-DVD, $100.

Visit omega.com/bobi

for Additional Books

snubber for
gaseous media

snubber for water
and light oils

snubber for
dense liquids
(motor oil)

4-conductor
shielded wire

snubber for
gaseous media

snubber for water
and light oils

snubber for
dense liquids
(motor oil)

4-conductor
shielded wire

TANDARD MODELS

S

AVAILABLE FOR FAST DELIVERY!

To Order (Specify PX209 for Cable or PX219 for DIN Connector)

psi
GAGE PRESSURE RANGES (psig) WITH 4 TO 20 mA OUTPUT

0 to 15 0 to 1.0 PX209-015GI $235 PX219-015GI $235 DPi8, DP41-E, DP25B-E

0 to 30 0 to 2.1 PX209-030GI 235 PX219-030GI 235 DPi8, DP41-E, DP25B-E

0 to 60 0 to 4.1 PX209-060GI 235 PX219-060GI 235 DPi8, DP41-E, DP25B-E

0 to 100 0 to 6.9 PX209-100GI 235 PX219-100GI 235 DPi8, DP41-E, DP25B-E

0 to 200 0 to 13.8 PX209-200GI 235 PX219-200GI 235 DPi8, DP41-E, DP25B-E

0 to 300 0 to 20.7 PX209-300GI 235 PX219-300GI 235 DPi8, DP41-E, DP25B-E

ABSOLUTE PRESSURE RANGES (psia) WITH 4 TO 20 mA OUTPUT

0 to 15 0 to 1.0 PX209-015AI $235 PX219-015AI $235 DPi8, DP41-E, DP25B-E

0 to 30 0 to 2.1 PX209-030AI 235 PX219-030AI 235 DPi8, DP41-E, DP25B-E

0 to 60 0 to 4.1 PX209-060AI 235 PX219-060AI 235 DPi8, DP41-E, DP25B-E

0 to 100 0 to 6.9 PX209-100AI 235 PX219-100AI 235 DPi8, DP41-E, DP25B-E

0 to 200 0 to 13.8 PX209-200AI 235 PX219-200AI 235 DPi8, DP41-E, DP25B-E

0 to 300 0 to 20.7 PX209-300AI 235 PX219-300AI 235 DPi8, DP41-E, DP25B-E

VACUUM AND COMPOUND RANGES WITH 4 TO 20 mA OUTPUT

-14.7 to 0 -1 to 0 PX209-30VACI $235 PX219-30VACI $235 DPi8, DP41-E, DP25B-E

-14.7 to 15 -1 to 1.0 PX209-30V15GI 235 PX219-30V15GI 235 DPi8, DP41-E, DP25B-E

-14.7 to 45 -1 to 3.1 PX209-30V45GI 235 PX219-30V45GI 235 DPi8, DP41-E, DP25B-E

-14.7 to 85 -1 to 5.9 PX209-30V85GI 235 PX219-30V85GI 235 DPi8, DP41-E, DP25B-E

-14.7 to 135 -1 to 9.3 PX209-30V135GI 235 PX219-30V135GI 235 DPi8, DP41-E, DP25B-E

Comes complete with 5-point NIST traceable calibration.
Ordering Example: PX219-015AI, 4 to 20 mA output transducer for absolute pressure with

a 0 to 15 psia range, PS-4G snubber and TX4-100 shielded wire, $235 + 12.75 + 35 = $282.75.

METRIC MODELS

bar CABLE STYLE PRICE CONN. STYLE PRICE

See section D for compatible meters.

*

AVAILABLE FOR FAST DELIVERY!

COMPATIBLE METERS*

To Order (Specify PXM209 for Cable or PXM219 for DIN Connector)

bar CABLE STYLE PRICE CONN. STYLE PRICE

GAGE PRESSURE RANGES (bar) WITH 4 to 20 mA OUTPUT

0 to 1.0 PXM209-001GI $235 PXM219-001GI $235 DPi8, DP41-E, DP25B-E
0 to 1.6 PXM209-1.60GI 235 PXM219-1.60GI 235 DPi8, DP41-E, DP25B-E
0 to 2.5 PXM209-2.50GI 235 PXM219-2.50GI 235 DPi8, DP41-E, DP25B-E
0 to 4.0 PXM209-004GI 235 PXM219-004GI 235 DPi8, DP41-E, DP25B-E
0 to 6.0 PXM209-006GI 235 PXM219-006GI 235 DPi8, DP41-E, DP25B-E
0 to 10.0 PXM209-010GI 235 PXM219-010GI 235 DPi8, DP41-E, DP25B-E
0 to 16.0 PXM209-016GI 235 PXM219-016GI 235 DPi8, DP41-E, DP25B-E
0 to 20.0 PXM209-020GI 235 PXM219-020GI 235 DPi8, DP41-E, DP25B-E

ABSOLUTE PRESSURE RANGES (bar) WITH 4 to 20 mA OUTPUT

0 to 1.0 PXM209-001AI $215 PXM219-001AI $215 DPi8, DP41-E, DP25B-E
0 to 1.6 PXM209-1.60AI 235 PXM219-1.60AI 235 DPi8, DP41-E, DP25B-E
0 to 2.5 PXM209-2.50AI 235 PXM219-2.50AI 235 DPi8, DP41-E, DP25B-E
0 to 4.0 PXM209-004AI 235 PXM219-004AI 235 DPi8, DP41-E, DP25B-E
0 to 6.0 PXM209-006AI 235 PXM219-006AI 235 DPi8, DP41-E, DP25B-E
0 to 10.0 PXM209-010AI 235 PXM219-010AI 235 DPi8, DP41-E, DP25B-E
0 to 16.0 PXM209-016AI 235 PXM219-016AI 235 DPi8, DP41-E, DP25B-E
0 to 20.0 PXM209-020AI 235 PXM219-020AI 235 DPi8, DP41-E, DP25B-E

VACUUM AND COMPOUND RANGES (bar) WITH 4 to 20 mA OUTPUT

VAC to 0 PXM209-VAC000GI $235 PXM219-VAC000GI $235 DPi8, DP41-E, DP25B-E
VAC to 1 PXM209-VAC001GI 235 PXM219-VAC001GI 235 DPi8, DP41-E, DP25B-E
VAC to 3 PXM209-VAC003GI 235 PXM219-VAC003GI 235 DPi8, DP41-E, DP25B-E
VAC to 6 PXM209-VAC006GI 235 PXM219-VAC006GI 235 DPi8, DP41-E, DP25B-E
VAC to 9 PXM209-VAC009GI 235 PXM219-VAC009GI 235 DPi8, DP41-E, DP25B-E

Comes complete with 5-point NIST traceable calibration. * See section D for compatible meters.
Note: The current output versions of the vacuum and compound sensors generate 4 mA at vacuum

and 20 mA at full scale.
Ordering Example: PXM219-001AI, 4 to 20 mA output transducer for absolute pressure with

a 0 to 1 bar range, PS-4G-MG snubber and TX4-100 shielded wire, $235 + 12.75 + 35 = $282.75.

B-151

COMPATIBLE METERS*

53.59

(2.11)

1/4

NPT

17.48

(0.69)

Ø25.4

(1.00)

PX209
PX219

Voltage Output

Ø25.4
(1.00)

18
HEX
PXM209
PXM219

1.78

(0.07)

18.79
(0.74)

51.31 (2.09)

34.26

(1.35)

max

9 mm DIN 43650 with PG7 Gland

G1/4

PIN WIRE
1

+ EXC RED

2

COM BK

3

+OUT WT

Dimensions: mm (in)
ø = diameter

C

urrent Output
PIN WIRE
1 + EXC RED
2 - EXC BK

Dimensions: mm (in)
ø = diameter

PRESSURE TRANSDUCERS

CURRENT OUTPUT

B

Wireless Connections From
Your Sensor to Your
Instrumentation:

⻬ Thermocouple, RTD,

⻬ Easy to Install and Use
⻬ Capable of Distances

Current Output
PIN WIRE
1 + EXC RED
2 - EXC BK

Voltage Output

PIN WIRE

1 + EXC RED

2 COM BK

3 + OUT WT

MAKE IT WIRELESS!

ADD WIRELESS CAPABILITY TO YOUR
PROCESS MEASUREMENT SYSTEM!

e

et

l

mp

or Co

Infrared Temperature,
Humidity, pH, as well as
Process Voltage/Current

up to 120 m (400')

UWTC-1, $125.

Both models
shown smaller
than actual
size.

UWTC-REC2,
$235, available
with 4 to 20 mA, 0 to 5 Vdc,
0 to 10 Vdc and Type K
thermocouple output.

F

De

Wi

Section W

B-150

e

Se

ils

a

t

ss

le

re

Laptop not included.

WRS232-USB wireless transmitter,
$159, shown close to actual size.

Wireless Communications
From Your Instrument to
a PC:

⻬ Convert the RS232

Signal on Your Meter,
Controller or PLC

⻬ Works with any PC

with a USB Port

⻬ Easy to Install with

Seamless Operation

⻬ Capable of Distances

up to 120 m (400')