![](/html/a4/a409/a409c016acd02ff2b7c06063b1a006aa548665726a0e2df9094f967c56f62edc/bg1.png)
INDUSTRIAL TRANSMITTER
LONG-TERM RELIABILITY
SMART OR ANALOG OUTPUT
PX2088S Series
4 to 20 mA Output/SMART
0-1 to 0-4000 psi
0-0.07 to 0-275 bar
All Ranges
$
1255
⻬ HART®-Protocol Ready
⻬ 20:1 Turndown
⻬ External Zero and Span
⻬ 0.20% Accuracy
⻬ Security Jumpers
⻬ Polysilicon Sensor
Ensures High Stability
and Reliability
⻬ Dual-Compartment
Housing (Watertight
Electronics Compartment)
⻬ Individually
Characterized and
Digitally Compensated
⻬ RFI Protection
Selected Options
⻬ Stainless Steel or
Hastelloy
®
Wetted Parts
⻬ Silicon or Inert Oil Fill
⻬ LCD Meter Option
⻬ Integral Manifolds,
Preassembled and
Leak Tested
Recommended Reference Book:
Environmental Remote Sensing
ES-1019, $205.
Visit omega.com/bobi
for Additional Books
,
PX2088S-30GI
analog transducer,
$1255, shown smaller
than actual size.
OMEGA’s PX2088S Series smart
pressure transmitters maintain a
specification conformance of at least
3. The reliable performance of these
rugged transmitters, when coupled
with the broad selection of options,
makes these transducers an
exceptional value for tough process
applications.The PX2088S is
designed to operate safely in the
event of damage or failure to the
sensor diaphragm. The electronics
compartment is isolated from the
process by 2 seals.
A third seal isolates the field
terminals and conduit entries.
This design ensures against
housing pressurization and
process contamination.
The electronics incorporates an
ASIC module that accepts the digital
signal from the sensor, along with the
correction coefficients, then corrects
and linearizes the signal. This is then
converted to an analog signal for
retransmission. The output section
also handles the HART
communications.
®
AVAILABLE FOR FAST DELIVERY!
To Order (Specify Model Number)
MODEL NO. PRICE MIN SPAN MAX SPAN COMPATIBLE METERS*
SMART 4 to 20 mA Output
PX2088S-30GI $1255 0 to 1.5 psi 0 to 30 psi DP41-E, DP25B-E, DP24-E
PX2088S-150GI 1255 0 to 7.5 0 to 150 DP41-E, DP25B-E, DP24-E
PX2088S-600GI 1255 0 to 30 0 to 600 DP41-E, DP25B-E, DP24-E
PX2088S-4KGI 1255 0 to 200 0 to 4000 DP41-E, DP25B-E, DP24-E
Comes with complete operator’s manual.
See section D for compatible meters.
*
See Specifications for fitting material and fill fluid options.
To order absolute pressure ranges, change the “G” in the model number to an “A”, and add
$215 to price. To order LCD meter scaled 0 to 100%, add suffix “-M5”, and add $250 to price.
Ordering Example: PX2088S-150AI, smart transducer, 150 psi absolute pressure range,
with 4 to 20 mA output, $1255 + 215 = $1470.
B-175
![](/html/a4/a409/a409c016acd02ff2b7c06063b1a006aa548665726a0e2df9094f967c56f62edc/bg2.png)
SMART OR ANALOG INDUSTRIAL TRANSMITTER
Transmitter
Circuitry
Optional
Meter Cover
125 (5.0)
110 (4.3)
Max.
20 (0.75)
Clearance
for Cover
Removal
2 x ½ - 14 NPT*
Conduit
Connection
Terminal
Connections
®
OMEGA
100 (3.9)
Certifications
Tag
120
(4.7)
140
(5.4)
Typical
½ - 14 NPT
Female
†
Process
Connection
2 x ¼ - 20
UNC - 2B
Mounting
Holes
OMEGA
®
140
(5.0)
90
(3.5)
63
(2.5)
32 (1.25)
HEX
150 (6.0)
125 (5.0)
110 (4.3)
Max.
80 (3.0)
2-inch U-Bolt
for Pipe Mounting
SMART FUNCTIONALITY
The PX2088S smart transducer
HART®protocol allows easy access
to configuration, test, and setup
capabilities.
The PX2088S can be configured
using a HART
or another HART®-based
communications device.
Configuration consists of
two steps. First, the transmitter
operational parameters are set
including:
– Zero and span
– Damping
– Engineering units.
Second, data can be entered into the
transmitter to allow identification and
physical description of the
transmitter. These data include:
– Tag: 8 alphanumerics
– Descriptor: 16 characters
– Message: 32 characters
– Date
– Integral meter installation
– Remote seal information
In addition to the configurable
parameters, the PX2088 software
contains information that is not userchangeable. Non-configurable
information includes:
– Transmitter type
– Sensor limits
– Minimum span
®
communicator
– Fill fluid
– Isolator material
– Module serial number
Transmitter software revision level
–
SPECIFICATIONS
Excitation: 10.5 to 36 Vdc unregulated,
reverse polarity protected
Supply Effect: <0.01% span/V
Zero Elevation and Suppression:
Zero can be suppressed between
atmosphere (or 0 psia for absolute
ranges) and the upper range limit
(URL), provided the span is ≥ the
minimum span and the URL does not
exceed the unit’s URL. No vacuum
calibrations are allowed on the gage
pressure models.
Overpressure Limits:
8 and 30 psi Ranges: 120 psi
>30 psi Ranges: 2x URL
Process Temperature Limits:
Silicon Fill: -40 to 121°C
(-40 to 250°F)
Inert Fill: -30 to 121°C (-20 to 250°F)
Ambient Temperature Limits:
Standard: -40 to 85°C (-40 to 185°F)
LCD Meter: -20 to 80°C (-4 to 175°F)
Volumetric Displacement: <0.00042 cm
Accuracy: Includes linearity, hysteresis
and repeatability
Smart: ±0.20% of calibrated span
Analog: ±0.25% of calibrated span
Ambient Temperature Effect:
Smart:
±(0.003% URL + 0.003% span)/°F
Analog (Ranges >8 psi): -40
to 0°F ±(0.007% URL + 0.008%
span)/°F; -0 to 140°F ±(0.005%
URL + 0.005% span)/°F; 140 to 185°F
±(0.007% URL + 0.008% span)/°F
Stability:
Smart: ±0.10% URL for 12 months
Analog: ±0.25% URL for 12 months
Vibration: <±1% URL 4 mm pk/pk
5 to 15 Hz
and constant acceleration of
(15 to 150 Hz) and 1 g (150 to 2000 Hz)
Process Connection:
Wetted Parts: 316 SS
(Hastelloy
®
optional)
1
⁄2 to 14 FNPT
Electronic Housing: Sealed to NEMA 4X
(IP66), low-copper aluminum with
polyurethane paint; cover O-ring is
Buna-N
Electrical Connections:
1
⁄2 to 14 NPT
conduit
Fill Fluid: Silicon oil, standard;
inert oil, optional
Weight:
Smart: 1.11 kg (2.44 lb)
Analog: 0.86 kg (1.9 lb)
3
Fitting Material/Fill Options: (add suffix)
SS/Silicon Oil: Standard
Hastelloy/Silicon Oil:
“-33” add $250
PRESSURE TRANSDUCERS
CURRENT OUTPUT
2 g
B
Dimensions: mm (in)
Optional 2" Pipe Mounting Bracket
PX2088-MB, $60.
B-176