LOW-VOLTAGE AMPLIFIED
OUTPUT TRANSDUCER
FOR 5 Vdc POWER
±1.0 to ±30 psi
±0.07 to ±2 bar
PX139 Series
U Available for
Differential, Gage, or
Absolute Measurement
U Precision 4V
Output Span
U Precise Temperature
Compensation
U For Dry Gas
U 5V Excitation
The PX139 Series pressure
transducer uses state-of-the-art
micro-machined silicon sensors
with stress-free packaging
techniques to provide highly
accurate, temperature-compensated
pressure measurements for the
most demanding applications.
Designed to operate from a 5 Vdc
power source, the PX139 provides
a calibrated 4V output span of
0.25 to 4.25V.
SPECIFICATIONS
Excitation Voltage: 5 Vdc @ 2 mA
Output: 0.25 to 4.25 Vdc
Span: 4V ±0.1V
Linearity and Hysteresis: ±0.1% FS
typical, 0.5% max
(0.5% typ. 1% max for ±0.3 psi range)
Repeatability: ±0.3% FS
Zero Balance: 2.25 ±0.1 Vdc diff.;
0.25 ±0.1 Vdc abs.
Storage Temperature:
-40 to 125°C (-40 to 257°F)
Compensated Temp Range:
0 to 50°C (32 to 122°F)
Zero Temp Effects: ±0.5% FS
(±1% FS for 0.3 psi)
Span Temp Effects: ±0.5% FS
(±1% FS for 0.3 psi)
Proof Pressure: >3x FS pressure
Burst Pressure: >5x FS
pressure
Common Mode Press: 50 psi
Media Compatibility: For use with
gases compatible with silicon, glassfilled nylon and alumina ceramic
Mating Connector: CX136-4
(sold separately)
PX139-001D4V, shown 2.5x
larger than actual size.
Actual size.
0.0356 x 0.05
0.64
(0.25)
27.4
(1.08)
Port A: Absolute
Port B: Gage
(0.014 x 0.02)
12.2
(0.48)
4 PLACES FOR
ELECTRICAL CONNECTION
4.8
(0.19)
14.0
(0.55)
Dimensions: mm (in)
PINOUT:
1. +Vs
2.Gnd
3.Vout
4. N/C
DOT is pin 1
RIVET
MOUNTING
3.6 (0.14),
TYPICAL
A
B
20.3
(0.80)
21.6
(0.85)
27.9
(1.10)
2.54
(0.10)
TYPICAL
To Order Visit omega.com/px139 for Pricing and Details
GAGE/DIFFERENTIAL
PRESSURE MODEL NO. COMPATIBLE METERS
±1 psi 0.069 bar PX139-001D4V DP25B-E, DP41-E
±5 psi 0.34 bar PX139-005D4V DP25B-E, DP41-E
±15 psi 1.0 bar PX139-015D4V DP25B-E, DP41-E
±30 psi 2.1 bar PX139-030D4V DP25B-E, DP41-E
ABSOLUTE PRESSURE RANGES
0 to 15 psia 0 to 1.0 bar PX139-015A4V DP25B-E, DP41-E
0 to 30 psia 0 to 2.1 bar PX139-030A4V DP25B-E, DP41-E
Comes complete with operator’s manual.
Ordering Example: PX139-015A4V, amplified 0 to 15 psia output transducer.
ACCESSORY
MODEL NO. DESCRIPTION
CX136-4 Mating connector for PX139 series transducers
PRESSURE TRANSDUCERS
VOLTAGE OUTPUT
B
B-86