Omega Products PX02C1-010GV User Manual

HIGH-ACCURACY MILLIVOLT

(1.5)

DIA.

PTIH-10-6P

OR EQUAL

(0.45)

70 MAX

(2.75)

(0.625)

(0.875)

PX02:

19 HEX

(0.75)

PXM02: G1/4 Internal TH'D

PXM02: 21 HEX

(0.83)

PXM02: 21 HEX

(0.83)

(1.50)

DIA.

PX02:

19 HEX

(0.75)

0 to 10,000 psi: 7/16-20 UNF or 1/4 NPT

PX02: 10,000 psi and higher 1/4 HP tube

PXM02: 21 HEX

ELECTRICAL CONNECT OR: PTIH-10-6P OR EQUAL

(0.81)

(2.75)

(0.45)

19 HEX

(0.75)

Male Connection

PX02

PXM02 18 HEX (0.71)



PPROVED

OUTPUT PRESSURE TRANSDUCER

STANDARD AND METRIC MODELS

PX02/PXM02 Series

mV/V Output 0-10 to 0-30,000 psi-

Standard Models 0-700 mbar to 0-400 bar-

Metric Models

1 bar = 14.5 psi 1 kg/cm2= 14.22 psi 1 atmosphere = 14.7 psi = 29.93

inHg = 760.2 mmHg = 1.014 bar

⻬ FM Approved

Intrinsically Safe

⻬ FM Hazardous Location

Approval Optional

⻬ High Operating Temp:

163°C (325°F)

⻬ All Stainless Steel

Construction

⻬ Shunt Calibration for

⻬ Hermetically Sealed for

OMEGA’s PX02/PXM02 is a highaccuracy, 30-millivolt output industrial pressure transducers. The all stainless steel construction and hermetically sealed case make them suitable for harsh environments. An FM Approved Intrinsically Safe rating is standard, and hazardous location ratings are optional. The PX02/PXM02 have a high operating range, a broad compensated range, and excellent temperature compensation that gives stable readings in harsh applications. They are available in gage, sealed, or absolute models as well as psi or metric ranges, with either connector or cable terminations.

Fast System Setup

Harsh Environments (Not Gage Units)

tandard

Starts at

475

PX02K1-100GV, 7⁄16-20 UNF

connection, $475, shown

STANDARD

actual size.

SPECIFICATIONS

mV/V OUTPUT

Excitation: 10 Vdc (15 Vdc max) Output: 3 mV/V ±0.25% Input Resistance: 350 ±10 Ω Output Resistance: 350 ±10 Ω Linearity: ±0.15% FS Hysteresis: ±0.1% FS Repeatability: ±0.1% FS Zero Balance: 1.0% FS Agency Approvals:

Standard: FM Intrinsically Safe

IS/I.II.III/1/CDEFG Optional: FM Hazardous Location S/I/1/ABCD

Shunt Calibration: Value specified on calibration sheet

Sensing Element: 4-active-arm bridge, using thick-film strain gages in a hermetically sealed chamber

Operating Temp Range:

-73 to 163°C (-100 to 325°F)

Compensated Temp Range:

16 to 71°C (60 to 160°F)

Female Connection

Wiring Code: DIN Pin Wire Conn 2 A: GN + Out 3 B: WT - Out GND C: BK - Ex 1 D: RD +Ex

E: BU Shunt F: OR Shunt

B-59

METRIC

PXM01MC1-006BARGV, G $495, shown actual size.

Thermal Effects:

Span: 0.003% rdg/°F

Zero: 0.003% FS/°F Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH SS Pressure Port: See custom

configurations chart Electrical Connection: See custom

configurations chart

Mating Connector (Style 1):

PT06F10-6S (sold separately)

Weight: 255 g (9 oz)

Dimensions: mm (in)

⁄4,

Cable style.

PX02C0-100GV, 1⁄4 NPT male, $495, shown smaller than actual size.

STANDARD CUSTOM CONFIGURATIONS

PX02 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (psi) UNITS OUTPUT OPTIONS

Models < 10,000 psi

⁄4-18 NPT-M +$20

C = D = 1⁄4-18 NPT-F, no charge J = 7⁄16-20 UNF-M +$20 K = 7⁄16-20 UNF-F, no charge

Models ≥10,000 psi

S = 1⁄4 HP tube fitting

no charge

* 2 and 5 psi ranges available only with amplified output.

See page B-12 for additional options, including extended temperature ranges.

Ordering Examples: PX02C1-100GI, 100 psi gage pressure transducer with output, $475 + 20 + 175 = $670. PT06F10-6S, mating connector (sold separately), $26.50.

PX02K0-1KS5Z, 1000 psi sealed gage pressure transducer with + 190 = $665.

PX02J1-015A5T, 15 psi absolute pressure transducer with $540 + 20 + 155 + 50 = $765. PT06F10-6S, mating connector (sold separately), $26.50.

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

L = Overload stops

here available

$65

X = Oxygen cleaning

$75 plus 2 weeks

FM = FM hazardous

location

+$150

Mating Connector

PT06F10-6S $26.50

0 = 3 m (10') cable (std) 1 = PTIH-10-6P connector

(or equal, no charge). Mating connector (sold separately), order

PT06F10-6S $26.50

6 = mini DIN connector*

*no shunt cal (no charge)

G1⁄4 Pressure Snubbers: $12.75

PS-4G-MG = Gas PS-4E-MG = Lt Oil PS-4D-MG = Dense

002* 005* 010 015 020 025 050 075 100 150 200 250 300 500 750 1K

1.5K 2K 3K

3.5K 5K

7.5K 10K 20K 30K

⁄

A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S A,G,S

-20 UNF female fitting, 3 m (10') cable, and isolated 0 to 5 Vdc output, $475

⁄

-20 UNF male fitting, PTIH-10-6P connector and 0 to 5 Vdc output,

Base Price PX02: V = mV/V output $475: 50 to 7500 psig $540: below 50 psig,

above 7500 psig

Add $50 for absolute pressure ranges

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units

5. Select output

6. Select options and agency approvals

-18 NPT male fitting, PTIH-10-6P connector and 4 to 20 mA

⁄

Liquid

PRESSURE TRANSDUCERS

MILLIVOLT OUTPUT

METRIC CUSTOM CONFIGURATIONS

PXM01 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (BAR) UNITS OUTPUT OPTIONS

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

MA = G1⁄8B Male +$20 MB = G1⁄8B Female no charge MC = G1⁄4B Male +$20 MD = G1⁄4B Female no charge

1.0

1.6

2.5

4.0

6.0 10

0 = 3 m (10') cable (std)

$15/m over 3 m (10')

1 = PTIH-10-6P connector

(or equal, no charge)

6 = mini DIN connector*

*no shunt cal (no charge)

See page B-12 for additional options including

16 25 40 60 100 160 250 400

extended compensated temperatures.

Ordering Examples: PXM01MB0-010BARSV, 10 bar sealed gage pressure transducer with G termination, $475.

PXM01MD1-010BARAV, 10 bar absolute pressure transducer with G1⁄4B female connection and twist-lock connector, $525. PT06F10-6S, mating connector (sold separately), $26.50.

A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S

V = mV/V Base price PXM01 $475 ≥2.5 bar $540 <2.5 bar

Add $50 for absolute pressure ranges

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units – absolute, gage

or sealed gage

5. Select output

6. Select options and agency approvals

B female connection and 3 m (10') cable

⁄

OX = Cleaned for

oxygen service

OL = Overload stops

( )m = Optional cable length

in meters

B-60

+ 2 hidden pages