Omega Products PX01C1-010A5T User Manual

VERY-HIGH-ACCURACY AMPLIFIED



F M

APPROVED

107

(4.2) MAX

38.1

(1.50)

DIA.

PX01

19 (3/4)

HEX

PXM01

21 (0.83)

HEX

15.9

(0.625)

9.7

(0.38)

Pressure Port

(0.81)

PX02: 1/4 NPT, 7/16-20 UNF or 1/4 HP tube fitting PXM02: G1/8 or G1/4

1/2 -14 NPT, PTIH-10-6P or mini DIN Connector

O R E Z

Wiring Code

A: B: C: D: E: F:

Connection + OUTPUT – OUTPUT – INPUT + INPUT SHUNT SHUNT

N A P S

DIN

2 3

GND

VOLTAGE OUTPUT TRANSDUCER

STANDARD AND METRIC MODELS

PX01/PXM01 Series

0 to 5 Vdc Output 0-2 to 0-30,000 psi-Standard Models 0-150 mbar to 0-400 bar-Metric Models

Starts at

835

Standard

⻬ 0.05% Linearity ⻬ Internal Shunt Resistor for Easy

System Checks

⻬ FM Intrinsically Safe ⻬ 5-Point Calibration Provided ⻬ All Stainless Steel Construction ⻬ Hermetically Sealed Design for Harsh

Environments

⻬ Available in Gage, Absolute, Sealed

Gage, psi, and Metric Ranges

⻬ Cable or Connector Models ⻬ Optional Pressure Ports to Fit Most

Industrial Applications

OMEGA’s PX01/PXM01 Series pressure transducers are very high-accuracy, amplified voltage output units for industrial applications. Their all stainless steel construction and hermetically sealed case make them suitable for harsh environments. An FM Intrinsically Safe rating is standard. A broad temperaturecompensated range of 15 to 71°C (60 to 160°F) and excellent temperature compensation make these transducers very stable with fluctuating temperatures.

SPECIFICATIONS

Excitation: 24 to 32 Vdc Output: 0 to 5 Vdc ±0.03 Vdc Linearity: 0.05% FSO Hysteresis: 0.05% FSO Repeatability: ±0.05% FSO Zero Balance: 0 V ±0.01 Vdc Agency Approvals: Standard FM Intrinsically Safe

IS/I.II.III/1/CDEFG Sensing Element: 4-active-arm bridge, using thick-film strain

gages in a hermetically sealed chamber (except gage units)

Shunt Calibration Value: 80% FS Operating Temp Range: -46 to 121°C (-50 to 250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F)

STANDARD

PX01C0-075G5T, $855, shown smaller than actual size.

B-129

Cable style.

Twist-lock style.

METRIC

PXM01MC1-025BARG5T, $855, shown smaller than actual size. See custom configurations chart on next page for ordering details.

Thermal Effects:

Span: 0.002% of rdg/°F

Zero: 0.001% of FSO/°F Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH stainless steel Pressure Port: See Custom Configuations Electrical Connection: See Custom Configuations Mating Connector: PT06F10-6S (sold separately) Weight: 388 g (13.7 oz)

Dimensions: mm (in)

VERY-HIGH-ACCURACY ALL STAINLESS STEEL TRANSDUCER

⁄4 NPT Pressure

Snubbers: $12.75

PS-4G = Gas PS-4E = Lt Oil PS-4D = Dense Lq

STANDARD CUSTOM CONFIGURATIONS

“C” or “D”

models only

PX01 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (psi) UNITS OUTPUT OPTIONS

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

Models <10,000 psi

C =

⁄4-18 NPT-M +$20

D = 1⁄4-18 NPT-F, no charge J = 7⁄16-20 UNF-M +$20 K = 7⁄16-20 UNF-F, no charge

Models ≥10,000 psi

S = 1⁄4 HP tube fitting

no charge

0 = 3 m (10') cable (std)

+$6.50/ft over 3 m (10')

1 = PTIH-10-6P connector

(or equal, no charge). Mating connector (sold separately), order

PT06F10-6S $26.50

6 = mini DIN connector

*no shunt cal (no charge)

See page B-12 for additional options, including extended compensated temperatures.

002 005 010 015 020 025 050 075 100 150 200 250 300 500 750 1K

1.5K 2K 3K

3.5K 5K

7.5K 10K 20K 30K

S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A

†

S,G,A

†

S,G,A

†

S,G,A

Base price PX01 $835: 50 to 7500 psig $905: < 50 psig or

> 7500 psig Add $50 for absolute pressure ranges

5T = 0 to 5 Vdc 5Z = Isolated 0 to 5V

+35 all ranges

10T= 0 to 10 Vdc output

No Charge

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units

5. Select output

6. Select options and agency approvals

†

Supplied with 1⁄4 HP tube fitting.

OL = Overload stops

OX = Cleaned for

( )ft = Optional cable

+$65

oxygen use +$75 plus 2 weeks

length in feet $6.50/ft over 10 feet

PRESSURE TRANSDUCERS

VOLTAGE OUTPUT

Ordering Examples: PX01C1-100G5T, 100 psi gage pressure transducer with output, $835 + 20 = $855. PT06F10-6S, mating connector (sold separately), $26.50. PX01K0-1KS5Z, 1000 sealed gage pressure transducer

with

-20 UNF female fitting, 3 m (10') cable, isolated 0 to 5 Vdc output, $835 + 35 = $870. PX01J1-015A5T, 15 psi absolute pressure

⁄

transducer with PT06F10-6S, mating connector (sold separately), $26.50.

-20 UNF male fitting, PTIH-10-6P, connector, 0 to 5 Vdc output, $905 + 50 + 20 = $975.

⁄

-18 NPT male fitting, PTIH-10-6P, connector and 0 to 5 Vac

⁄

G1⁄4 Pressure Mating Connector PT06F10-6S

METRIC CUSTOM

$26.50

CONFIGURATIONS

PXM01 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (BAR) UNITS OUTPUT OPTIONS

MA = G MB = G1⁄8B Female no charge MC = G1⁄4B Male +$20 MD = G1⁄4B Female no charge

See page B-12 for additional options including extended compensated temperatures.

Ordering Examples: PXM01MB0-010BARSI, 10 bar sealed gage pressure transducer with G termination, and 0 to 5 Vdc output, $855.

PXM01MC1-010BARAI, 10 bar absolute pressure transducer with G $855 + 20 = $875. PT06F10-6S, mating connector (sold separately), $26.50.

[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]

⁄8B Male +$20

0 = 3 m (10') cable (std)

$15/m over 3 m (10')

1 = PTIH-10-6P connector (or equal,

no charge) Mating connector (sold separately), order

PT06F10-6S $26.50

6 = mini DIN connector*

*no shunt cal (no charge)

0.16

0.4

1.0

1.6

2.5

4.0

6.0 10 16 25 40 60 100 160 250 400

S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A S,G,A

Base price PXM01 $835 ≥1.6 bar $905 <1.6 bar

Add $50 for absolute pressure ranges

5T = 0 to 5 Vdc 5Z = isolated 0 to 5 Vdc

+$35 all ranges

10T = 0 to 10 Vdc

no charge

To order a custom configuration:

1. Select a pressure port

2. Select electrical connection

3. Select a pressure range

4. Select pressure units

5. Select output

6. Select options and agency approvals

B female connection, 3 m (10') cable

⁄

B male connection, twist-lock connector and 0 to 10 V output,

⁄

Snubbers: $12.75

PS-4G-MG = Gas

PS-4E-MG = Lt Oil

PS-4D-MG = Dense

Liquid

OX = Cleaned for

oxygen service

OL = Overload stops

( )m = Optional cable

length in meters

$15/m over 3 m

B-130

+ 2 hidden pages