LOW-COST, ELECTRONICALLY
#8-32 NC-2B TH'D
2 PLC'S
DIMENSIONS mm (inches)
CONTROLLED PROPORTIONAL VALVES
USING SOLENOID TECHNOLOGY
PV100 Series
U Low Power Consumption
U 100 ms Response Time
at Maximum Pressure
U Stainless Steel Wetted
Parts with FKM Seals
U 12 to 24 Vdc Power
U For Clean, Dry, Non-
Corrosive Gases Only
The OMEGA® PV100 Series
comprises economical proportional
valves for use with gases. They
combine a solenoid valve with an
electronics package that digitally
modulates the control signal to
provide analog proportional control
without the expense or complexity
of stepper motors, servo valves, or
other proportioning devices. The
PV100 Series can be used in openor closed-loop systems to control
flow, pressure, temperature, speed,
or position parameters of gases.
SPECIFICATIONS
Valve Type: 2-way normally closed
Wetted Parts: Stainless steel with
FKM seals
Power: 12 to 24 Vdc
Power Consumption: 7 W maximum
Control Signals: 0 to 5 Vdc, 0 to 10
Vdc or 4 to 20 mA DC (specify when
ordering)
Ambient Temperature Range:
-10 to 50°C (14 to 122°F) media
temperature
Range: -18 to 82°C (0 to 180°F)
Linear Control Range: 15 to 85% of
full flow
Response Time for Complete Cycle
(Off—Fully Open—Off): 40 ms
@ 0 pressure; 100 ms @ max pressure
PV101-MA with CNi16D53
controller (sold separately),
shown actual size.
Visit omega.com
Dimensions: mm (inch)
84.07
(3.31)
Repeatability: ±5% when in operating
linear control range
Electrical Connection: 0.4 m (18")
color-coded lead wires
Wiring:
Red: DC power supply
74.45
(3.01)
P
13.46
(0.53)
Gray: Control signal (+)
Black: Common (to power
and control)
Pressure Connections:
1
⁄8 FNPT
32.51
(1.28)
Enclosure: General purpose, NEMA 11
50.80
(2.00)
To Order
MODEL NO. ORIFICE C
PV101-(*)
PV102-(*)
PV103-(*)
PV104-(*)
(*) Specify input control signal: “-MA” for 4 to 20 mA DC, “-5V” for 0 to 5 Vdc and “-10V”
for 0 to 10 Vdc.
Comes complete with operator’s manual.
Ordering Example: PV103-MA, proportional valve with
pressure and 4 to 20 mA DC input control signal.
Visit omega.com/pv100 for Pricing and Details
FLOW RANGES, SCCM
MAXIMUM
PRESS. PRESS. (10 psi)
V
1
⁄
32
"
3
⁄
64
"
1
⁄
16
"
5
⁄
64
"
0.02 13.8 bar (200 psi) 0 to 50,000 0 to 8000
0.045 7 bar (100 psi) 0 to 65,000 0 to 17,000
0.08 4 bar (60 psi) 0 to 75,000 0 to 30,000
0.12 2.7 bar (40 psi) 0 to 80,000 0 to 45,000
AT MAXIMUM
1
" orifice, 4 bar (60 psi) maximum
⁄
16
26.92 DIA.
(1.06 DIA.)
1/8 NPT
2 PLC'S
AT 0.7 bar
L-21