HIGH-ACCURACY TRIPLE-RANGE VOLTAGE
OUTPUT PRESSURE TRANSDUCER
7
⁄16-20 PRESSURE OR 1⁄4 NPT CONNECTION
Triple Range
0-5 Vdc Output
0-5 to 40,000 psi
0-350 mbar to 2760 bar
1 bar = 14.5 psi
1 kg/cm2 = 14.22 psi
1 atmosphere = 14.7 psi = 29.93
inHg = 760.2 mmHg = 1.014 bar
PX03 Series
Standard
U High Accuracy
U Switch Selectable —
Specifications Apply
to All Ranges
U Internal Shunt Resistor
for Each Range
U All Stainless Steel
Construction
U Sealed for Harsh
Environments
U Available in Gage,
Absolute, Sealed Gage,
psi, and Metric Ranges
OMEGA’s PX03 Series consists of
high accuracy, switch-selectable,
triple range voltage output industrial
pressure transducers. All stainless
steel construction and a sealed case
makes these tranducers suitable
for the harshest industrial
environments. A broad
temperature-compensated range
of 16 to 71°C (60 to 160°F) and
excellent temperature compensation
make these transducers very stable
with fluctuating temperatures. The
ranges are switch selectable and
the accuracy and temperature
specifications apply to each range.
The PX03 is available in gage,
absolute, or sealed models, as
well as psi or metric ranges. NPT
and 7⁄16-20 UNF O-ring seal fittings
are available for industrial and
hydraulic applications.
PX03C1-030G5T
with 1⁄4 NPT fitting,
shown smaller
than actual size.
Metric thread
adaptors available,
see omega.com
CUSTOM BUILT TO ORDER!
To Order Visit omega.com/px03 for Pricing and Details
Models with
RANGE
psi bar MODEL NO.
ABSOLUTE PRESSURE (All Ranges Available in Absolute Pressure)
15/10/5 1.0/0.69/0.34 PX03[*]1-015A5T
20/15/10 1.4/1.0/0.69 PX03[*]1-020A5T
30/20/10 2.1/1.4/0.69 PX03[*]1-030A5T
35/25/15 2.4/1.7/1.0 PX03[*]1-035A5T
50/35/20 3.4/2.4/1.4 PX03[*]1-050A5T
GAGE PRESSURE (All Ranges Also Available in Sealed Gage Pressure)
15/10/5 1.0/0.69/0.34 PX03[*]1-015G5T
20/15/10 1.4/1.0/0.69 PX03[*]1-020G5T
30/20/10 2.1/1.4/0.69 PX03[*]1-030G5T
35/25/15 2.4/1.7/1.0 PX03[*]1-035G5T
50/35/20 3.4/2.4/1.4 PX03[*]1-050G5T
75/50/25 5.2/3.4/1.7 PX03[*]1-075G5T
100/75/50 6.9/5.2/3.4 PX03[*]1-100G5T
200/150/75 13.8/10.3/5.2 PX03[*]1-200G5T
300/200/100 20.7/13.8/6.9 PX03[*]1-300G5T
500/300/150 34.5/20.7/10.3 PX03[*]1-500G5T
750/500/250 51.7/34.5/17.2 PX03[*]1-750G5T
1K/750/350 69/51.7/24.1 PX03[*]1-1KG5T
1.5K/1K/500 103/69/34.5 PX03[*]1-1.5KG5T
2K/1.5K/750 138/103/51.7 PX03[*]1-2KG5T
3K/2K/1K 207/138/69 PX03[*]1-3KGT
5K/3.5K/1.5K 345/241/103 PX03[*]1-5KG5T
7.5K/5K/2.5K 517/345/172 PX03[*]1-7.5KG5T
10K/7.5K/3.5K** 690/517/241 PX03S1-10KG5T
15K/10K/5K** 1034/690/345 PX03S1-15KG5T
20K/15K/7.5K** 1379/1034/517 PX03S1-20KG5T
30K/20K/10K** 2068/1379/690 PX03S1-30KG5T
40K/30K/10K** 2758/2068/690 PX03S1-40KG5T
Comes complete with 5-point NIST traceable calibration.
* 4-digit meter, counts in increments of 10. **
† See omega.com for compatible meters.
Metric ranges available – consult Engineering.
[*] Insert “K” for
To order absolute pressure, replace the “G” in model number with “A” and add cost.
To order sealed gage units, replace “G” in model number with “S” (no extra charge).
Ordering Example: PX03K1-1KG5T, triple-range 1000/750/350 psi gage transducer with
0 to 5 V output, twist lock connector and
PT06F10-6S, mating connector (sold separately).
ACCESSORY
MODEL NO. DESCRIPTION
PT06F10-6S Mating connector for PX03 series tranducers
7
⁄16-20 UNF or
7
-20 UNF female connection (standard) or “C” for
⁄
16
1
⁄4 NPT CONNECTION
7
-20 UNF female pressure connection.
⁄
16
COMPATIBLE METERS
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E, DP24-E
DP41-E, DP25B-E*, DP24-E*
DP41-E, DP25B-E*, DP24-E*
DP41-E, DP25B-E*, DP24-E*
DP41-E, DP25B-E*, DP24-E*
1
HP tube fitting only.
⁄
4
1
MNPT male (add cost).
⁄
4
†
B-127
ARTWORK/PRODUCT ART/ OMEGADYNE/OD-PX03
1.500
DIA.
0-10,000 PSI: 7/16-20
0-10,000 THRU 0-30,000 PSI: 9/16-18
0.750 HEX
TRIPLE-RANGE TRANSDUCER
Dimensions: mm (inch)
Wiring Code
Pin
Connection
A
SPECIFICATIONS
TRIPLE OUTPUT
Specifications apply to each range
Excitation: 24 to 32 Vac/Vdc
Output: 0 to 5 Vdc ±10% adj
Zero Balance: 0 V ±10% adj
Linearity: ±0.15% FS
Hysteresis: ±0.1% FS
Repeatability: ±0.05% FS
Sensing Element: 4-active-arm
bridge, using thick-film strain gages
in a hermetically sealed chamber
(except gage units)
Shunt Calibration Value:
Specified on calibration sheet
Operating Temp Range:
+ OUTPUT
B
– OUTPUT
C
– INPUT
D
+ INPUT
E
SHUNT
F
SHUNT
O
R
E
Z
S
P
A
N
3
1
2
PT1H-10-6P
OR EQUAL
RANGE SELECTOR
POS. #1 LOW. PRESS. RANGE
POS. #2 MED. PRESS. RANGE
POS. #2 HIGH PRESS. RANGE
11
(0.45)
38 (1.50)
DIA.
108 (4.25)
MAX
-46 to 121°C (-50 to 250°F)
Compensated Temp Range:
16 to 71°C (60 to 160°F)
Thermal Effects:
Span: 0.003% of rdg/°F
Zero: 0.003% of FS/°F
Proof Pressure:
150% of rated pressure
Burst Pressure:
300% of rated pressure
Wetted Parts: 17-4 PH stainless steel
CUSTOM CONFIGURATIONS
Pressure Port:
Ranges <10,000 psi:
7
⁄16-20 UNF
female; also available: 7⁄16-20 UNF
male or 1⁄4-18 NPT male/female
Ranges 10,000 to 30,000 psi:
9⁄16-18, 1⁄4" HP tube
Electrical Connection:
PTIH-10-6P or equal
Mating Connector:
PT06F10-6S (sold separately)
1
Snubbers:
PS-4G = Gas
PS-4E = Lt Oil
PS-4D = Dense Lq
“C” or “D” models only
SERIES PRESSURE ELECTRICAL RANGE
PX03 PORT CONNECTION (psi) UNITS OUTPUT OPTIONS
[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]
C = 1⁄4-18 NPT-M
D = 1⁄4-18 NPT-F
J = 7⁄16-20 UNF-M
K = 7⁄16-20 UNF-F
Ranges ≥ 10,000 psi
S = 9⁄16-18 1⁄4" HP tube
15/10/5
20/15/10
30/20/10
35/25/15
50/35/20
75/50/25
100/75/50
200/150/75
1 = PTIH-10-6P connector
(or equal)
Mating connector
(not included), order
PT06F10-6S
300/200/100
500/300/150
750/500/250
1K/750/350
1.5K/1K/500
2K/1.5K/750
3K/2K/1K
5K/3.5K/1.5K
7.5K/5K/2.5K
Metric ranges available –
Consult Engineering.
10K/7.5K/3.5K
15K/20K/5K
20K/15K/7.5K
30K/20K/10K
To order absolute pressure, replace “G” in model number with “A” and add cost to price.
To order sealed gage units, replace “G” in model number with “S”, no extra charge.
Ordering Example: PX03K1-1KG5T, triple-range 1000/750/350 psi gage transducer with 0 to 5 V output, twist lock connector and
female pressure connection. PT06F10-6S, mating connector (sold separately).
40K/30K/10K
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
S,G,A
5T = 0 to 5 Vdc output
For additional options, including extended
temperature ranges, see omega.com
To order a custom configuration:
1. Select a pressure port
2. Select electrical connection
3. Select a pressure range
4. Select pressure units
5. Select output
6. Select options
OL = Overload stops
+ additional
cost where
available
OX = Cleaned for
oxygen service
+ additional
cost plus
2 weeks
19 (3/4)
HEX
1/4 NPT or
7/16-20 TH'D
16
(0.63)
19 (3/4)
HEX
Mating
Connector
PT06F10-6S
⁄4 NPT Pressure
7
-20 UNF
⁄
16
PRESSURE TRANSDUCERS
VOLTAGE OUTPUT
B
B-128