Omega Products PST020A User Manual

Thermocouple Wire Stripper

For Metal-Sheathed or OMEGACLAD® Wire

Simple as

Sharpening

a Pencil!

Power adaptor standard, shown mounted in a drill chuck.

U Larger Chip Ports

for Continuous Self-Cleaning

U Power Tool Adaptor

Standard

U Expanded Range

of Sizes

Sheath Diameter vs. Rotational Speed

0.25 to 0.79 mm (0.010 to 0.032") hand,1 to 3.17 mm (0.040 to 0.125") hand to 300 rpm, 4.75 to 6.25 mm (0.185 to 0.250") 150 to 300 rpm Where the stripping action is being conducted on semi-production or production quantities, the power adapted tool is recommended.

Strippers for Both Metric and Standard Wire

EASY TO USE Method 1 (sizes 1 mm (0.040")

and larger)

1. Secure the sheath in a vice, collet, or other holding fixture.

2. Locate the tool over the end of the sheath and apply a slight pressure on the tool while turning it by hand or machine, rotating in a clockwise direction, as though sharpening a pencil.

3. After the cut has started, the tool will self-feed until it runs against the holding fixture.

4. Slip the tool off over the exposed wires.

PST Series

OMEGACLAD

Method 2 (sizes 0.79 mm (0.032")

and smaller)

1. Firmly grip the sheath a small distance from the end [about

0.25 mm ( jaw pliers or any other holder which will firmly grip without crushing the sheath.

2. Grab the adaptor by hand, feed the sheath into the opening and slowly rotate the stripper while applying slight pressure, as though sharpening a pencil.

3. The tool will self-feed until it runs against the holding fixture.

4. Slip the tool off over the exposed wire.

Wire

⁄4")] with a pair of flat

To Order Visit omega.com/pst_clad_strip for Pricing and Details

Nominal Sheath OD Tool Tolerance Weight Model Replacement Tool Bit Power Inches Metric Inches g (oz) Number Model Number Adaptor Size

0.020 0.50 mm 0.019 to 0.021 28 (1) PST020A TB125 S

0.025 0.60 mm 0.024 to 0.026 28 (1) PST025A TB125 S

0.032 0.79 mm 0.031 to 0.034 28 (1) PST032A TB125 S

0.040 1.00 mm 0.040 to 0.044 71 (2 1⁄16 1.50 mm 0.060 to 0.064 71 (21⁄2) PST062A TB188 M 1⁄16 1.57 mm 0.063 to 0.067 71 (21⁄2) PST065A TB188 M

0.080 2.00 mm 0.077 to 0.083 71 (21⁄2) PST20MMA TB188 M 3⁄32 2.38 mm 0.090 to 0.094 71 (21⁄2) PST090A TB188 M

0.118 3.00 mm 0.115 to 0.121 128 (41⁄2) PST30MMA TB250 M 1⁄8 3.17 mm 0.122 to 0.128 128 (41⁄2) PST125A TB250 M

0.177 4.50 mm 0.174 to 0.180 227 (8) PST45MMA TB250 L 3⁄16 4.75 mm 0.185 to 0.190 227 (8) PST187A TB250 L

0.236 6.00 mm 0.233 to 0.239 227 (8) PST60MMA TB250 L 1⁄4 6.25 mm 0.247 to 0.253 227 (8) PST250A TB250 L

To order additional power adaptors, specify POWER ADAPTOR (*), where (*) indicates S, M or L. Find power adaptor size in table above.

Ordering Examples: POWER ADAPTOR L for PST250A stripper and TB250, replacement tool bit for PST250A stripper. POWER ADAPTOR M for PST062A stripper and TB188, replacement tool bit for PST062A stripper.

⁄2) PST040A TB188 M

H-61