Omega Products PRG200-120 User Manual

PRECISION AIR
IN OUT
¼ NPT GAUGE PORT (BOTH SIDES)
54.1
(2.13)
43.0
(1.69)
4.2 (0.44)
35.0
(1.38)
54.1
(2.13)
¼ NPT
“IN” & “OUT”
PORTS
BLEED
SCREW
1.25 MOUNTING
BRACKET HOLES
17 64
(2) PLACES
PRG200-MB
MOUNTING
BRACKET
(OPTIONAL)
44.45 (1.75)
TAMPER PROOF NUT (OPTIONAL)
Ø
PRESSURE REGULATOR
FOR ACCURATE, STABLE PRESSURE CONTROL
14 scfm at 100 psi
PRG200-40, shown actual size.
PRG200 Series
U Accurate Pressure
U Stable Output Across
Full Flow Range
U High Relief Capacity U Locking Nut Included U Built In Gauge Ports
The PRG200 Series is a high precision multi-stage regulator, which provides the highest level of regulation accuracy and repeatability available. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve. This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
SPECIFICATIONS
Flow Capacity: 14 scfm at 100 psig
supply – 20 psig outlet Exhaust Capacity: 3 scfm (5 psig
above 20 psig set point); 11 scfm for PRG200-120H
Sensitivity: Pilot Pressure Chamber Bleed Rate:
1
8" (3.2 mm) H2O
< 0.08 scfm (0.15 m
Total Air Consumption: 6 scfh Supply Pressure Effect: < 0.005 psig
(for 25 psig supply change) Supply Pressure, Maximum: 150 psig
(50 psig for PRG200-25)
3
/hr)
Dimensions: mm (inch) ø = diameter
PRG200-MB
MOUNTING
BRACKET
(OPTIONAL)
BRACKET HOLES
Materials: Body: Diecast zinc alloy
Capsule and Adjusting Screw: stainless steel Assemblies: Stainless steel, brass, plated steel, acetal Diaphragms: Buna-N elastomer and polyester fabric Knob: Phenolic plastic
Weight: 635 g (1.4 lb) Port Size: Gauge Ports (2):
1
4 NPT
1
4 NPT
Mounting: Pipe, panel or optional bracket
IN OUT
12.7 mm (0.5") diameter hole for panel mounting; max panel thickness 12.7 mm (0.5")
To Order Visit omega.com/prg200 for Pricing and Details
OUTPUT PRESSURE RANGE MODEL NO. psi bar
PRG200-25 0.5 to 25 0.03 to 1.72 PRG200-40 2 to 40 0.14 to 2.76 PRG200-60 2 to 60 0.14 to 4.14 PRG200-120 2 to 120 0.14 to 8.27
HIGH RELIEF MODEL
PRG200-120H 2 to 120 0.14 to 8.27
ACCESSORY
MODEL NO. DESCRIPTION
PRG200-MB Mounting bracket
Comes complete with operator’s manual. Ordering Example: PRG200-60, precision air pressure regulator, 2 to 60 psi
(0.14 to 4.14 bar).
L-12
1.25 MOUNTING
17
Ø
(2) PLACES
64
¼ NPT GAUGE PORT (BOTH SIDES)
VALVES AND REGULATORS
L
Loading...