Omega Products PR-25AP-A-0600-1-4-M12 User Manual

Air Temperature
ACCURACY
IEC CLASS
AA
(±0.15ºC @ 0ºC)
RTD Probe
With M12 Connection
PR-25AP Series
Starts at
$
90
up to 12" long
Probe Length
12" and longer
8
For Complete
Details Visit
omega.com/m12c
1
4
±
1
±
1
4
"dia
9
" dia
1
16
PR-25AP-A-0600-0-M12, $90, shown smaller than actual size.
0.66" dia
PR-25AP-A-0600-1/4-M12, $90, shown smaller than actual size.
9
Hex
16
1
NPT
4
Pt100 RTD with Class A
316L Stainless Steel
Probe and Housing with Vent Holes Around Element
Temperature Range:
-100 to 250°C (-148 to 500ºF)
M12, 4-Pin, A-Coded
Plug Connector for Easy Installation
Available With or Without
NPT Mounting Threads
Probe Will Withstand
400 psi (27.6 bar) Differential Pressure Between Airstream and Ambient Conditions
L
PR-25AP probe tip, close-up
This sensor combines the usefulness of our ultra-precise air measurement RTD sensors with the convenience of our PR-21 M12 enabled RTD sensors. The design of the probe includes a perforated sheath over the sensing element shielding it from debris while allowing airflow to directly reach the element. This results in a sensor which is capable of providing accurate, fast responding temperature measurements.
OMEGA®also offers a wide variety of compression fittings, extension cables and measurement and control instruments which allow you to fully customize the system to best meet your measurement and control needs.
L-1
Don’t Forget to
Order a M12 Extension
Cable to Easily Connect
Your Sensor to Your
Instrumentation
1.1" Ref
0.5" Ref
M12C-SIL-4-R-F-1.5, extension cable sold separately, $10. Visit omega.com/m12c for optional extension cables.
PR-25AP-A-1200-0-M12, shown with M12C-SIL-4-R-F-1.5, $96 + 10 = $106.
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model Number Price Probe Diameter Probe Length Mounting Thread PR-25AP-A-0600-0-M12 $90 ¼" 6" No thread PR-25AP-A-1200-0-M12 96 ¼" 12" No thread PR-25AP-A-1800-0-M12 102 ¼" 18" No thread PR-25AP-A-0600-1/2-M12 90 ¼" 6" PR-25AP-A-1200-1/2-M12 96 ¼" 12" PR-25AP-A-1800-1/2-M12 102 ¼" 18" PR-25AP-A-0600-3/8-M12 90 ¼" 6" PR-25AP-A-1200-3/8-M12 96 ¼" 12" PR-25AP-A-1800-3/8-M12 102 ¼" 18" PR-25AP-A-0600-1/4-M12 90 ¼" 6" PR-25AP-A-1200-1/4-M12 96 ¼" 12" PR-25AP-A-1800-1/4-M12 102 ¼" 18"
1
For
DIN accuracy, change “-A-” to “-1/3-” after the “-25AP-” in the model number and add $9 to price.
3
1
For
DIN accuracy, change “-A-” to “-1/10-” after the “-25AP-” in the model; number and add $36.50 to price.
10
A limited selection of Pt1000 elements are available, please consult sales. Ordering Examples: PR-25AP-A-0600-A-M12, Pt100, Class A RTD sensor with ¼" diameter by 6" long probe, M12 connection with no
mounting threads, $90. PR-25AP-1/10-1200-1/2-M12, Pt100, Class
threads, $96 + 36.50 = $132.50.
1
DIN RTD sensor with
10
1
" diameter by 12" long probe, M12 connection with
4
L-2
1
2 NPT
1
2 NPT
1
2 NPT
3
8 NPT
3
8 NPT
3
8 NPT
1
4 NPT
1
4 NPT
1
4 NPT
1
NPT mounting
2
Loading...
+ 1 hidden pages