Omega Products PCL-2A-E User Manual

BENCHTOP PRESSURE STANDARDS

WITH INTERCHANGEABLE RANGE MODULES

PCL-2A Series

PCL-2A, $2430, with 2 pressure
modules, PCL-MB-010G, $1110,
and PCL-MB-1KG, $1265.

Data Logging and

Hi/Lo Programmable

Relays Standard

Starts at

$

2430

Standard

⻬ Interchangable

Pressure Modules
Available for Ranges
from 0.25 inH2O to
7500 psi

⻬ Large Display Indicates

Dual Readings
Simultaneously

⻬ Accurate to 0.06% FS

The PCL-2A is the perfect
companion product to OMEGAs
PCL-1B handheld calibrator. For
the ultimate in measurement
flexibility, this benchtop or panel
mount unit uses the same PCL-M
pressure modules as the PCL-1B
(for details, see page A-42).

An intuitive menu-driven user interface
puts all of the PCL-2A power at the
simple press of a key. It uses PCL-M
plug-in modules to provide the ultimate
in measurement flexibility.

A-39

Two plug-in pressure
modules allow range
changes without calibration,
shown smaller than actual
size. Modules sold
separately, see page A-42.

Now you can purchase a calibration
system to serve your field and
bench mounting requirements while
enjoying the significant cost savings
gained through the availability of
commom pressure modules and
software.

BENCHTOP PRESSURE CALIBRATORS

Standard Features

• Measurement of pressure,
temperature, voltage and current

• Two-channel—simultaneous
measurement and display of
pressure, temperature, voltage or
current in any combination

• Accuracy ratings of to 0.05% FS
(pressure)

• Pressure ranges from

0.25

inH2O to 7500 psi

• Multiple engineering units—
12 factory-programmed plus
1 user-programmable
engineering unit

• Programmable damping

• Tare capability

• Display hold

• RS232 two-way communications

• Standard NIST-traceable certificate
of calibration

• Data logging—automatic, manual
and delayed actuation (user
programmable)

• Relays—Hi/lo programmable
configurations—N/O and N/C

Optional Features

• Supplies 24 Vdc to power
transmitters, transducers, switches

• High-static differential pressure
measurement with dual sensor

• Battery power—5 “AA” Ni-Cads with
built-in charger (included)

Application Capabilities

• Switch testing, including trip, reset
and deadband

• Leak detection in either leak rate or
pressure decay modes

To Order (Specify Model Number)

MODEL NO. PRICE DESCRIPTION

PCL-2A $2430 Base unit, including data logging, high and low alarm

relays and backlit display (requires 1 or more plug-in
pressure modules, see page A-42)

ORDER ADD’L
SUFFIX PRICE DESCRIPTION

-B $155 Rechargeable Ni-Cad batteries

-E 365 Built-in 24 Vdc loop power supply

Comes complete with calibration certificate and operator’s manual.

Ordering Example: PCL-2A-B, benchtop pressure calibrator with Ni-Cad battery option,
PCL-MA-100BWC, ±100 inH2O, and PCL-MB-030G, 0 to 30 psig plug-in pressure module,
$2430 + 155 + 1295 + 1110 = $4990. Modules shown on page A-42.

• Flow velocity and volume
measurement using standard pitot
tubes and anubars

• Automatic % error calculation
simplifies transmitter or transducer
calibration

• Valve test and set using the
min/max tracking feature

AVAILABLE FOR FAST DELIVERY!

A

PRESSURE INSTRUMENTS

mA and V
display

Menu-driven
setup

Push to
zero

Flow velocity
and volume

Data log up to
714 records

Control
backlight

Min/max
memory

12 engineering units
at the press of a key

Trip detector for
switch calibration

A-40

Tare to remove
pressure preload