Omega Products OSXL-101 User Manual
Thermal Imager
OSXL-101
Series
$
1990
⻬ Thermal Imager with
Ethernet Connection
⻬ Easy to Use and
Implement
⻬ 2256 Pixel Resolution
⻬ Built-In Alarms
⻬ NEMA 4 (IP65)
The OSXL-101 is a compact infrared
thermal imaging sensor utilizing a
thermopile array detector. The
OSXL-101 sensor measures realtime temperature and a thermal
image up to 300°C (572°F). Ethernet
connectivity allows the sensor to
communicate with the PC running
the application software or
customers LAN.
Specifications
Temp Range: -20 to 300°C (-4 to 572°F)
Working Temp: -10 to 50°C
(14 to 122°F)
Working RH: 10 to 80% RH
(no dew condensation)
Temperature Resolution: 0.5°C
Accuracy: ±2% of reading or ±3°C
whichever larger
(at ambient temp of 25°C ±2°C)
Detector: Thermopile array,
48 x 47 pixels
Wavelength: Center wavelength 10µm
Viewable Angle: 60°x 60° or 25° x 25°
Radius Resolution: 21.8 mrad
Frame Speed: 3 fps (1 fps for alarm
output)
Focus: Fixed focus
Emissivity: 0.10 to 1.00
Ethernet: 10BASE-T/100BASE-TX
Alarm: 2 SPST (non-voltage contact
output)
Power Supply: 9 to 30 Vdc
Power Consumption:
Max 2VA @ 12 Vdc
Inrush Current: Max 1.3A @ 12 Vdc
(The inrush current should be
considered for the selection of power)
Casing: Polycarbonate (color: black)
Weight: Approx. 150 g (5.2 oz)
(sensor only)
Protection: NEMA 4 (IP65) (with
provided exclusive cable and tripod screw)
Standards: CE (EN61326 Annex A)
OSXL-101, $1990,
shown with
mounting stand
(included).
Thermal imaging software included.
Thermal image PC screen of 4 sensors
(maximum) connected.
J-7
Mounting stand
features a ball-socket
fitting for full range
of motion.
Thermal image PC screen of 1 sensor
connected.
Functions
1 m
(3.28')
3 m
(9.84')
5 m
(16.4')
1.4 m (4.6')
29 mm
(1.2")
88 mm
(3.5")
146 mm
(5.7")
4.2 m (13.8')
7.0 m (23')
View per pixel
For accurate measurements,
8 x 8 pixels or more for a target is recomended.
POWER SUPPLY
(12-24 V DC)
LAN
PLC
LAN
ALARM
OUTPUT1
ALARM
OUTPUT2
POWER SUPPLY
(12 -24 V DC)
1 m
(3.28')
3 m
(9.84')
5 m
(16.4')
0.5 m (1.64')
10 mm
(0.40")
31 mm
(0.10")
52 mm
(0.17")
1.5 m (4.9')
2.5 m (8.2')
View per pixel
For accurate measurements,
5 x 5 pixels or more for a target is recomended.
USB/LAN
ALARM
OUTPUT1
ALARM
OUTPUT2
POWER SUPPLY
(12-24 V DC)
Monitoring Mode
The temperature data is outputted continuously by a
command from the PC
Monitor Mode
Multiple Unit Connection (LAN)
⻬ Up to 4 sensors can be connected
⻬ Monitoring and alarm outputs from
sensor can be used together
Monitor lamp–state of
operation indicated in
blue, red, and purple
9 to 30 Vdc
powerinput/contact
alarm output (cable and
power supply included)
Monitor Mode
Single Unit Usage
⻬ Single unit can monitor 1 area and has
2 alarm outputs
⻬ When alarm goes on, the unit stores 1 image
to the memory
⻬ Image saving updates every occurrence of alarm
⻬ Reading the data from host PC is possible
Capturing Mode
The temperature data is outputted row-by-row horizontally
by a command from PLC, etc.
Connectivity
Up to 4 sensors can be connected to a PC via LAN and
viewer software allows you to monitor thermal images,
measuring temperature and alarms.
Capturing Mode
PLC Connection
⻬ The temperature data is outputted row-by-row
horizontally by a command from PLC, etc
Lens–measurement range:
-20 to 300°C (-4 to 572°F)
LAN connection
[2.5 m (8.2') cable
included]
Measuring Spot Size
and Distance: OSXL-101
J
Distance 1 m (3.28') 3 m (9.84') 5 m (16.4')
Width
m (ft)
Width/Pix
mm (in)
Measuring Spot Size
and Distance: OSXL-101-25
1.4 (4.6) 4.2 (13.8) 7.0 (23)
29 (1.2) 88 (3.5) 146 (5.7)
J-8
Distance 1 m (3.28') 3 m (9.84') 5 m (16.4')
Width
m (ft)
Width/Pix
mm (in)
0.5 (1.64) 1.5 (4.9) 2.5 (8.2)
10 (0.4) 31 (0.1) 52 (0.17)
Loading...