Omega Products OSXL-100-PE Installation Manual

User’s Guide

Shop online at

omega.com

e-mail: [e-mail]

For latest product manuals:

omegamanual.info

OSXL-100-PE

Thermal Imaging

Camera Enclosure

Introduction

Please read this manual completely before installing and operating your thermal imager and
protective enclosure. It’s important to read and follow all notes, cautions, warnings and safety
precautions before operating your camera. More information may be found in the OSXL-101
Series Manual.

1.1. Precautions

• This device is not designed for use in any medical or nuclear applications.

• Do not operate this device in flammable or explosive environments.

• Never operate with a power source other than the one recommended in this manual.

• Do not operate this device outside of the recommended use outlined in the thermal imager
manual.

• Never use your OSXL-101 Series Thermal Imager as a portable device. Your unit has been
designed to be operated in a permanent installation only.

NOTE: In order for your thermal imager enclosure to achieve the NEMA-4X rating, you must
follow the assembly instructions carefully.

NOTE: There are no user serviceable parts inside your device. Attempting to repair or
service your unit may void your warranty.

Items Included

• 1 Rear Assembly + Front Cover

• 4 Self Sealing Mounting Screws

• 1 1/4-20 Camera Mounting Screw

• 2 Grommets

OSXL-100-PE Dimensions

144 (5 21/32)

110 (4 11/32)

89 (3 1/2)

99 (3 57/64)

114 (4 1/2)

STATUS

OSXL-101 SERIES

THERMAL IMAGING CAMERA

OSXL-100-PE CASE

®

191 (7 17/32)

DIMENSIONS mm (in)

TRIPOD INCLUDED WITH

OSXL-101 CAMERA

OSXL-100-PE DIMENSIONS

1

92 (3 41/64)