Omega Products OSTW-CC-C-F User Manual

Ultimate Connector with Integral Cable Clamp Cap

Glass Filled Nylon Range -29 to 220°C (-20 to 425°F) Type OSTW Standard Size with Cable Clamp Cap

Incredible Labor Saver!

OSTW-CC Series

U Integral Cap and Cable Clamp U Strain Relief With Grommet U Pull Test High Rating U Captive Cover and

Clamp Screws

U Wire Termination

Up to Size 14 AWG

U 1⁄8" Back Plate (Supplied)

Accepts: Stranded, Solid, TWSH, Overbraid, or RSC Coil Cord Wire

U 1⁄4" Back Plate (Optional)

Clamps to 8.2 mm (0.325") OD

U Contact Washers for

Quick Connect Wire Terminations—No Wire Loop Required

U Internal Wire Divider U Write-On Window U Combination Phillips/

Slot Screws

U 100% Top Side Assembly

No Loose Screws, All

Cover Screws Are

Captive!

Back plate: to fit soft and overbraid wire. Optional: 1⁄4”ø to fit armored cable.

Contact washers.

Hollow pin standard, solid pin available.

OSTW-CC-K-M shown actual size.

⁄8”ø supplied

All screws are combination head.

Terminate straight wire, wire loop not necessary.

See omega.com for TC wire selection.

Grommets included.

Reduce Assembly

Time From 3 Minutes

to Less Than

1 Minute!

OSTW-CC-K-F shown actual size.

Universal Female

Mates with Standard or

Miniature Thermocouple

Connectors

G-9

SMPW-CC-K-M shown actual size.

OSTW-CC-K-M

shown actual size.

Pull Test

Highest Rating

OSTW-CC-K-F

shown actual size.

Discount Schedule

1-10 .................................... Net

11-49 ...................................5%

50-99 .................................10%

100-999 .............................15%

1000-4999 .........................20%

5000 and over....................25%

Quick Assembly Tool!

OST-CC-TOOL shown smaller than actual size.

1. Place back plate

and OST body

Side Load

Equal to

Stainless Steel

Dimensions: mm (inch)

15.06 (0.59)

11.11

(0.44)

ø4.75

(0.19)

12.7

(0.5)

2. Terminate

straight wire

ø = diameter

ø3.96

(0.16)

ø 2.77

(0.11)

8.0

(1.0)

11.1

(0.44)

45.64

(1.80)

33.33 (1.31)

25.40

(1.00)

3. Tighten

captive screws

CLAMP RANGE Supplied back plate opens to 5.7 (0.225) Optional 1⁄4" back plate opens to 8.2 (0.325)

ø 5.54 (0.22)

WIRE ACCESS IN CONNECTOR BODY

Front And Rear View Of Female

To Order Visit omega.com/ostw-cc for Pricing and Details

Compensating Alloy ANSI Alloy Used in Connector Color Glass-Filled Nylon Model Number Code (+) (-) Code Male** Uni-Female

CHROMEGA ALOMEGA Yellow OSTW-CC-K-M OSTW-CC-K-F Copper Constantan Blue OSTW-CC-T-M OSTW-CC-T-F Iron Constantan Black OSTW-CC-J-M OSTW-CC-J-F CHROMEGA Constantan Purple OSTW-CC-E-M OSTW-CC-E-F Copper RNX/SNX Green OSTW-CC-R/S-M OSTW-CC-R/S-F CPX CNX Red OSTW-CC-C-M OSTW-CC-C-F Copper Copper White OSTW-CC-U-M OSTW-CC-U-F OMEGA-P OMEGA-N Orange OSTW-CC-N-M OSTW-CC-N-F

* To order a pair, replace suffix “M” with “MF” for a connector pair. ** To order solid pin pale ponnectors, add suffix “-S” to the model number for additional cost. Ordering Example: OSTW-CC-K-M, clamp cap, Type K, hollow pin male.

G-10