Omega Products OMTBV7-WTC3E-10 User Manual
L-44
Omega’s new OMTBV7-W terminals are
designed to meet the three most important
criteria when selecting a terminal block line –
ease of wiring, secure connections and
durability. The line is also comprehensive,
offering a wide array of terminal types for
most circuits and functions, from control to
low level power.
The Size You Need
OMTBV7-W feed-through terminals come in
ten sizes and are rated to 600VAC (800VIEC). They accommodate a full range of wire
sizes from 30AWG to 3/0 AWG (0.5mm2 to
70mm2 wire cross section). Many
“specialty” feed-through terminals are also
available that provide multiple terminations
or increase the density of connections. This
reduces panel space and saves money.
Comprehensive Selection of
Special Terminals
Aside from the broad selection of standard
feed-through terminals, many special
terminals are also part of the new
OMTBV7-W line, including:
pad and serrated current bar. This corrosionresistant clamping mechanism provides
excellent performance in the most
demanding industrial conditions.
Superior Insulation and
Protection Features
All metal parts are recessed, providing a
touch-safe, dead front design for optimum
safety. Terminal bodies are manufactured
from Polyamide 6.6, known for its excellent
thermal stability, impact resistance and
resistance to electrical creepage. The
insulating cases are rated up to 90°C (195°)
for continuous operation. They also stay
elastic down to -40°C (-40°F) without
fracturing.
International Approvals
Omega’s new OMTBV7-W terminal block line
is UL recognized and CSA Certified. Many
terminals have also been certified for use in
hazardous locations. The line also carries the
CE Mark for use in most international
markets.
INTRODUCTION TO DIN
RAIL TERMINAL BLOCKS
Two level terminals
High Current terminals
Ground terminals
Dual connection terminals
Diode and resistor terminals
Plug-in style terminals
Various isolating terminals
Fuse terminals
Sensor terminals
Thermocouple terminals
Proximity switch terminals
Even the most varied circuit requirements
can be supported by the broad selection
offered with this line.
Super Reliable Connections
The most important aspect of a terminal
block is to join wires in a reliable connection.
With OMTBV7-W terminals, a cone shaped
guide allows easy insertion of the wire into a
nickel plated barrel. As tightening torque is
applied to strong stainless steel screws, the
wire is secured between a recessed contact
Stainless steel screws
and serrated current
bars provide a strong,
corrosion-resistant grip.
Cone shaped guide
allows easy wire
insertion.
Visit
omegamation.com
for our complete
line of terminal
blocks
L-46
To Order
(Specify Model Number)
MOST POPULAR MODELS LISTED!
To Order
(Specify Model Number)
Standard Sensor Blocks
TERMINAL MODEL NO. PRICE MODEL NO. PRICE
Gray, pkg of 25 OMTBV7-WTF3-25 $154.00 OMTBV7-WTS3-25 $146.00
ACCESSORIES
End Barrier, pkg of 25 OMTBV7-EBTF3-25 $31.00 OMTBV7-EBTS3-25 $31.00
End Anchors
-50 (pkg of 50)
-10 (pkg of 10)
Screw Type—Normal Duty OMTBV7-EA35-50 55.00 OMTBV7-EA35-50 55.00
Screw Type—Heavy Duty OMTBV7-EAH35-10 44.00 OMTBV7-EAH35-10 44.00
DIN rail, 35 x 7.5 mm x 2 m,
slotted XBANS3575P 9.00 XBANS3575P 9.00
DIN rail, 35 x 7.5 mm x 2 m,
solid XBANS3575U 9.30 XBANS3575U 9.30
DIN rail, 35 x 15 mm x 2 m,
slotted XBANS3515P 17.00 XBANS3515P 17.00
DIN rail, 35 x 15 mm x 2 m,
solid XBANS3515U 17.00 XBANS3515U 17.00
Blank marking tags,
5 x 9 mm, cards of 100 OMTBV7-SM5X9 8.00 OMTBV7-SM5X9 8.00
Pre-printed marking tabs,
single digit (0...9), sticks of 10 OMTBV7-MP5 3.00 OMTBV7-MP5 3.00
JUMPERS (PKG OF 5 OR 10)
Side Jumper – 10-pole Insulated OMTBV7-SJT5-20-R-10 $46.70 OMTBV7-SJT5-20-R-10 $46.70
Center Jumper – 50-pole OMTBV7-CJT5-50-5 131.00 OMTBV7-CJT5-50-5 131.00
Center Jumper – 10-pole OMTBV7-CJT5-10-10 62.00 OMTBV7-CJT5-10-10 62.00
Center Jumper Link OMTBV7-CJL5-10 9.00 OMTBV7-CJL5-10 9.00
SPECIFICATIONS OMTBV7-WTF3-25 OMTBV7-WTS3-25
Approvals
Voltage Rating (AC/DC) 300V 300V 500V 300V 300V 500V
Maximum Current 10 A 10 A 24 A 10 A 10 A 24 A
Wire Range #26 to 26 to 0.5 to #26 to #26 to 0.5 to
(Rated Cross Section) #14 AWG #14 AWG 2.5 mm
2
#14 AWG #14 AWG 2.5 mm
2
Wire Strip Length 8 mm (0.31") 8 mm (0.31")
Recommended Tightening Torque 0.5 Nm (4.2 to 4.6 lb-in.) 0.5 Nm (4.2 to 4.6 lb-in.)
Density 197/m (60 pcs./ft) 197/m (60 pcs./ft)
Insulation Temperature Range -40 to 90°C (-40 to 195°F) -40 to 90°C (-40 to 195°F)
Standard
Thermocouple
Blocks
PRICE
BAR MATERIAL MODEL NO. PKG OF 10
Chrome/Constantan - Type E OMTBV7-WTC3E-10 $100
Iron/Constantan - Type J OMTBV7-WTC3J-10 100
Chromel/Alumel - Type K OMTBV7-WTC3K-10 100
Copper/Constantan - Type T OMTBV7-WTC3T-10 100
ACCESSORIES
End Barrier (pkg of 50) OMTBV7-EB3-50 $38
End Anchors-50 (pkg of 50) -10 (pkg of 10)
Screw Type—Normal Duty OMTBV7-EA35-50 55
Screw Type—Heavy Duty OMTBV7-EAH35-10 44
SPECIFICATIONS
Wire Range (Rated Cross Section) 0.2 to 2.5 mm (#28 to #14 AWG)
Wire Strip Length 10 mm (0.35")
Recommended Tightening Torque 0.6 Nm (5.0 to 5.6 lb-in.)
Density 100/m (30 pcs./ft)
Insulation Temperature Range -40 to 90°C (-40 to 195°F)
Ordering Examples: OMTBV7-WTC3K-10, K thermocouple terminal blocks, OMTBV7-EB3-50, end barriers, and OMTBV7-EAH35-10,
end anchors, $100 + 38 + 44 = $182. OMTBV7-WTS3-25, sensor terminal blocks, $146.
2.5 mm
2
35 mm
(1.38")
45.3 mm
(1.78")
2.5 mm
2
44 mm
(1.74")
89.9 mm (3.54")
OMTBV7-WTF3-25
2.5 mm
2
44 mm
(1.74")
67.6 mm (2.66")
OMTBV7-WTS3-25
OMTBV7-WTC3E-10
DIN RAIL TERMINAL BLOCKS
l Thermocouple and
Sensor Terminal Blocks
l Type J, K, T, E Terminal Blocks
l Easy-to-Use Sensor Teminal Blocks
l Reliable Connections
Visit
omegamation.com
for our complete
line of terminal
blocks
Loading...