C-53
The OMG-USB-SER USB to serial
I/O adaptors provide two, four or
eight RS-232/422/485 serial ports
for USB connectivity to legacy
or non-USB compliant devices.
Each port is individually
configurable for RS-232, RS-422
or RS-485 communications via
internal dip switch settings.
OMB-USB-SER adaptors support
standard PC data rates up to
921.6K bps. Simply install the
included software and connect the
OMB-USB-SER adaptor to your
USB port.
The device is immediately
recognized by the system. At that
point, simply connect the adaptor
to your target device (i.e. modem,
serial printer, scale, bar code/mag
stripe reader, etc.).
Now your non-USB peripherals
can have the same connection
simplicity and ease of use as USB
aware peripherals. We include our
Windows 98/ME/2000/XP and Linux
drivers to simplify installation.
OMG-USB-SER-2, OMG-USB-SER-4
and OMG-USB-SER-8 Port
RS-232/422/485 to USB Adaptors
⻬ Field Selectable Interface
⻬ Power Obtained from
USB Cable – No External
Power Required
⻬ Automatic RS-485
Data Enable/Disable
⻬ “Hot Swapping”/Auto
Configuration
⻬ High Speed UART
with 128 byte TX
FIFO and 384 byte RX
⻬ FIFO Supporting
Standard PC Data Rates
up to 921.6K bps
⻬ 1.8 M (6') High Quality
USB Cable Included
⻬ Includes Driver
and Utility Software
OMG-USB-SER-4, $279,
Shown smaller than actual size
Specifications
Number of Ports: 2, 4 or 8
Interface: Field selectable
RS-232/422/485
Max. Data Rate: 921.6K bps
Max. Data Distance:
Up to 1219 m (4000')
Operating Temperature:
0 to 50°C (32 to 122 °F)
Storage Temperature:
-50 to 105°C (-58 to 221°F)
Humidity Range:
10 to 90% RH non-condensing
Power: USB cable
Connector(s):
2, 4 or 8 DB9P (male)
Dimensions:
OMG-USB-SER-2, -4;
17.78 L x 13.34 W x 3.81 cm H
(7.0 x 5.25 x 1.5"):
OMG-USB-SER-8;
22.1 L x 15.5 W x 5.1 cm H
(8.7 x 6.1 x 2.0")
$
229
Basic Unit