Omega Products OM-DAQPRO-5300 User Manual

Portable Handheld Data Logger
OM-DAQPRO-5300
U 8-Channel Data Logger—
Measures Voltage; Current; PT100 RTD; J, K, T Thermocouples; 2252 Ω or 10 KΩ Thermistors; Frequency/ Pulse Input
U Alarm Output U 16-Bit Sampling Resolution U Fast USB Communications U Rapid Sampling—Up to 4000
Samples/Sec (Single Channel Burst Mode)
U Large Data Storage—
512 KB RAM
U Graphical Display—
Shows Collected Data as Measured Values, Graphs or Tables
U Multiple Logging Sessions—
Stores up to 100 Recording Sessions
U Powerful Analysis Software
for Windows XP/VISTA/7
The OM-DAQPRO-5300 is an 8-channel portable data acquisition and logging system with graphic display and built­in analysis functions. The data logger is powered by an internal rechargeable battery and is capable of sampling, processing and displaying measurements without being connected to a computer.
The OM-DAQPRO-5300 is a professional, cost-effective, compact and stand-alone data logging system that can be used with a wide variety of applications. This 16-bit, high­resolution, 8-channel data logger has graphic displays and analysis functions for measuring voltage, current and temperature in real time. With its high-resolution and fast analog-to-digital converter (ADC), the OM-DAQPRO-5300 meets the majority of data logging requirements in most industrial applications. Its unique ability to display measured values and analyze them in real time on a graphical interface minimizes the need to download collected data to a computer for further analysis.
OM-DAQPRO-5300.
Every OM-DAQPRO-5300 datalogger is embedded with a unique serial number and can be loaded with a descriptive comment for safe identification.
The data logger is very easy to use because all its functions are broken down into an 8-icon menu. The four buttons on the data logger’s front keypad can be used to browse every menu and execute any of the commands.
Inputs
The OM-DAQPRO-5300 has eight input channels for measuring voltage, current, temperature and pulses. User-selectable input types/ ranges are 0 to 24 mA, 0 to 50 mV, 0 to 10 V, 2252 Ω or 10 KΩ thermistors, PT100 RTDs, type J/K/T thermocouple temperature sensors, internal temperature, pulse counter, frequency meter and up to 20 user-defined sensors (used for scaling analog voltage or current inputs in engineering units).
The OM-DAQPRO-5300 can record data from up to eight 2-wire or four 3-wire PT100 RTD inputs (two input channels are required for each 3-wire PT100 RTD input connected). Frequency/pulse counter is only available for input 1.
The data logger provides a simple and straightforward tool for defining up to 20 custom sensors.
Almost any 0 to 10 V and 4 to 20 mA sensor or transducer can be displayed and scaled in meaningful engineering units, e.g., psi or gpm. The sensor definitions are stored in the data logger’s memory and are added to the sensors list. The sensor’s readings are displayed in the user-defined units both on the OM-DAQPRO-5300’s LCD screen and the Windows software.
The inputs use pluggable screw terminal blocks for easy connection. An internal clock and calendar keep track of the date and time of every sample measured.
SM
OMEGACARE warranty program is available for models shown on this page. Ask
your sales representative for full
details when placing an order. OMEGACARE
labor and equivalent loaners.
extended
SM
covers parts,
To Order, Call or Shop Online at omega.com
SM
1
The OM-DAQPRO-5300 data logger includes Windows software on CD ROM, 110 Vac adaptor, USB cable, NIST calibraion cetificate, operator’s manual and carrying case.
Outputs
The OM-DAQPRO-5300 can automatically activate an external alarm device, e.g., energize an audible alarm or turn on a warning light, when an input channel is outside a specified range (Input/ Output 8 serves as either an input or an alarm output). The external alarm device (audible or visual alarm) is connected to the screw terminals of Input/Output 8. The alarm output is an open collector output, which is analogous to an electrical switch. High/low alarm levels and also whether the alarm output is activated during an out-of limit condition can be set for each input channel individually.
Windows Software
The OM-DAQPRO-5300 system also comes with powerful Windows software. When the data logger is connected to a PC, live displays can be viewed at rates of up to 100 samples/sec, and automatic downloads can be carried out at higher rates.
The software can display the data in graphs, tables or meters; analyze data with various mathematical tools; or export data to a spreadsheet. The Windows software also enables you to set up the data logger and to send advanced commands such as alarm settings, triggering conditions and text notes.
Applications
• Quality Assurance
• Plant and Machine Condition Monitoring
• Field Monitoring Stations
• Automotive Testing
• HVAC
• Plant Trouble-Shooting
• Electricity Transients Failure Detection
• Environmental Monitoring
• Monitor Food, Drug and Electronic Equipment Storage Conditions
• Water Quality Testing
• Research
Specifications
INPUTS Number of Inputs: 8 differential
analog inputs Input Type: Selectable type for each input: 0 to 24 mA, 0 to 50 mV, 0 to 10 V, 2252 Ω or 10 KΩ thermistor, PT100 RTD, J/K/T thermocouple, pulse and frequency (input 1 only)
0 to 24 mA Range: 0 to 24 mA Resolution: 0.47 µA Accuracy: ±0.5% FS Loop Impedance: 21 Ω
0 to 50 mV Range: 0 to 50 mV Resolution: 3 µV Accuracy: ±0.5% FS Input Impedance: 50 MΩ
OM-DAQPRO-5300, with sensors, shown smaller than actual size
0 to 10 V Range: 0 to 10 V Resolution: 200 µV Accuracy: ±0.5% FS Input Impedance: 125 KΩ TEMPERATURE THERMISTOR Thermistor Type: 2252 Ω/10 K Ω
Thermistor (OMEGA 44000 Series)
Range: -25 to 150°C (-13 to 302°F) Resolution: 0.05°C Accuracy: ±0.5% FS
TEMPERATURE PT100 RTD RTD Type: 100 Ω Pt RTD,
alpha = 0.00385 Range: -200 to 400°C (-328 to 752°F)
Resolution: 0.1°C (7 mΩ) Accuracy: -200 to -50°C, ±0.5%
of reading; 50 to 400°C, ±0.5% of reading; -50 to 50°C, ±0.5°C No. of RTD Inputs: Up to eight PT100 2-wire channels or four PT100 3-wire channels
2
To Order, Call or Shop Online at omega.com
SM
Windows software displays data in graphical or tabular format
INTERNAL TEMPERATURE Range: -25 to 70°C (-13 to 158°F)
Windows software high/low alarm setup
COMMUNICATION
USB 1.1 compliant
The OM-DAQPRO-5300 data logger includes Windows software on CD ROM, 110 Vac adaptor, USB cable, NIST calibration certificate, operator’s manual and carrying case
Analog Sampling Resolution:
16-Bits
Resolution: 0.1°C (1µV) Accuracy: ±0.3°C
PULSE COUNTER (INPUT 1 ONLY) OPTOCOUPLER INPUT Range: 0 to 65,000 counts Resolution: 1 count Input Signal: 0 to 5 V Input Impedance: 470 Ω Bandwidth: 0 to 25 Hz
FREQUENCY METER (INPUT 1 ONLY) OPTOCOUPLER INPUT Range: 20 to 4000 Hz Time Resolution: 6.5 µs Input Signal: 0 to 5 V Input Impedance: 470 Ω
GENERAL A/D SPECIFICATIONS Noise: 30 µV RMS Internal Linearity Error:
±0.08% of FSR
Offset Error: 0.1%
OPEN COLLECTOR ALARM OUTPUT (OUTPUT 8) Maximum Current Sink:
50 mA @ 5 Vdc (fuse protected)
Input Impedance: 50 Ω
SAMPLING Capacity: 512 KB (512,000
samples total) Analog Sampling Rate: The number of sensors in use limits the maximum sampling rate:
1. Maximum sampling rate with one sensor is 4000 samples/sec
2. Maximum temperature sampling rate 1 sample/sec
3. Maximum sampling rate with two sensors or more is 1 sample/sec
4. Maximum sampling rate with two PT100 RTD sensors or more is every 10 seconds
5. Maximum sampling rate with five sensors or more and at least one thermistor or thermocouple (J, K or T) is every 10 seconds
6. Maximum sampling rate with seven sensors or more is every 10 seconds
7. Maximum sampling rate with eight PT100 RTD sensors or more is every 10 seconds
8. Data logger displays readings in real time at rates up to 1 sample/sec
9. Data logger software displays online readings at rates up to
MAN/MACHINE INTERFACE Keyboard: Full keyboard
operation—enables manual programming of the data logger
Display: graphic LCD 64 x 128 pixels
POWER SUPPLY Power: Internal rechargeable 7.2
V Ni-MH battery, built in battery charger, external 9 to 12 Vdc input via included 110 Vac adaptor Battery Life: 40 hrs between charges
OPERATING TEMPERATURE Operating Temperature Range:
0 to 50°C (32 to 122°F)
MECHANICAL Enclosure: ABS plastic Dimensions:
182 H x 100 W x 28 mm D (7.17 x 3.94 x 1.10")
Weight: 450 g (1.0 lb)
STANDARDS COMPLIANCE
CE, FCC
1 sample/sec
Thermocouple Table
Thermocouple Type Range Accuracy* Resolution
-200 to -50°C (-328 to -58°F) ±0.5% of reading J -50 to 50°C (-58 to122°F) ±0.5°C 0.1°C (1µV) 50 to 1200°C (122 to 2192°F) ±0.5% of reading
-250 to -50°C (-418 to -58°F) ±0.5% of reading
K -50 to 50°C (-58 to122°F) ±0.5°C 0.1°C (1µV) 50 to 1200°C (122 to 2192°F) ±0.5% of reading
-200 to -50°C (-328 to -58°F) ±0.5% of reading T -50 to 50°C (-58 to122°F) ±0.5°C 0.1°C (1µV) 50 to 400°C (122 to 752°F) ±0.5% of reading
* Accuracy does not include cold junction compensation (CJC). CJC error: ±0.5°C
To Order, Call or Shop Online at omega.com
SM
3
The OM-DAQPRO-5300 data logger includes Windows software on CD ROM, 110 Vac adaptor, USB cable, NIST calibration certificate, operator’s manual and carrying case.
Windows software displays data in graphical or tabular format
ANALYSIS SOFTWARE Operating System: Windows XP/
VISTA/7
FEATURES:
• Fast data download
• Data displayed in numeric or graphical form
• Graphical analysis tools such as Zoom and Cursors
• Storage of selected data on disk files
• Hard-copy printing of the collected data
• Direct data export to Excel
• Online retrieval and display of data in real time
• Incorporates data processing functions
• Data logger setup
• Data logger calibration
• Defining new sensors
Maximum No. of Samples vs. No. of Input Channels
No. of Max. No.
Channels of Samples
1 512,000 2 256,000 3 128,000
4 128,000 5 64,000 6 64.000 7 64,000 8 64,000
Ready-Made Insulated Thermocouples with Stripped Leads
For more information,
please visit omega.com
Custom Lengths, Insulations and Configurations
Available
5TC Series
5 Pack
U Available from Stock in Convenient
5-Packs
U PFA PTFE, Kapton or Glass Braid
Insulation
U 20, 24, 30, 36 and 40 AWG Wires U 1 and 2 m (40 and 80")
Lengths Standard
U NIST Calibration Available
To Order
Model No. Description
OM-DAQPRO-5300 Portable handheld data logger (110 Vac adaptor) OM-DAQPRO-5300-230VAC Portable handheld data logger (230 Vac adaptor)
Accessories
Model No. Description
OM-DAQPRO-BOX Weatherproof IP67 enclosure for data logger OM-DAQPRO-COMCABLE OM-DAQPRO-110-ADAPTOR 110 Vac adaptor (spare) OM-DAQPRO-220-ADAPTOR 220 Vac adaptor (spare)
OM-DAQPRO-5300-BATTERY Rechargeable battery pack (spare)
OM-DAQPRO-5300-CONNECTOR Input terminal block (spare)
Each OM-DAQPRO-5300 data logger includes Windows software on CD ROM, 110 Vac or 230 Vac adaptor, USB cable, NIST calibration certificate, operator’s manual and carrying case.
Ordering Example: OM-DAQPRO-5300 portable handheld datalogger and OCW-1, OMEGACARE SM extends standard 1-year warranty to a total of 2 years.
Visit omega.com/om-daqpro-5300 for Pricing and Details
“TT” PFA PTFE insulation
USB communications cable (spare)
“GG” Glass braid insulation
To Order, Call or Shop Online at omega.com
SM
4
Loading...