Omega Products OM-CP-VOLT101A-15V-CERT User Manual



Voltage Data Loggers Part of the NOMAD®Family

OM-CP-VOLT101A Series

Optional †

⻬ 4 Hz Reading Rate ⻬ Multiple Start/Stop Function ⻬ Programmable

Engineering Units

⻬ Large Data Storage

1,000,000 Readings

⻬ 10-Year Battery Life ⻬ LED Alarming ⻬ High Speed Download

Capability

Voltage is one of the most fundamental and useful types of measurement performed today. Many scientific instruments and sensors provide a voltage output that represents the magnitude of some parameter being measured

OM-CP-VOLT101A-15V data logger, shown actual size.

such as temperature, pH, flow rate, pressure, strain, etc.

Data retrieval is simple. Plug the

The OM-CP-VOLT101A provides a low cost solution for adding recording capability to an already existing measurement system. Its high accuracy and 16-bit resolution place this product at the forefront for low level DC voltage recording devices.

This device is ideal for accurately measuring and recording battery voltages, sensor output signals, photovoltaic studies, as well as many other low level DC voltage sources. With user programmable engineering units, the user can scale the input voltage to most any type of unit desired automatically. This is a unique and very useful feature for presentations.

device into an available COM port and our easy-to-use software does the rest. The software converts a PC into a real-time strip chart recorder. Data can be printed in graphical and tabular format or exported to a text or Microsoft Excel file.

Specifications

Input Connection:

Removable screw terminal

Specified Accuracy Range:

Nominal range @ 25°C

Analog Conversion Time: 133 mS Frequency Rejection: 50/60 Hz Alarm: User selectable high and

low limits; blinking LED for alarm and low battery

Start Modes: Software

The OM-CP-VOLT101A is available in four different input ranges: 160 mV, 2.5V, 15V and 30V versions.

programmable immediate start, delay start up to 18 months in advance, multiple start/stop mode

Multiple Start/Stop Mode: Start and stop the device multiple times

†

Refer to ordering chart on next page for

NIST calibration ordering information.

without having to download data or communicate with a PC

To Order, Call or Shop Online at omega.com

OM-CP-VOLT101A-160MV data logger.

OM-CP-VOLT101A-160MV data logger, shown actual size.

Multiple Start/Stop Mode Activation:

To Start Device: Press and hold

the pushbutton and the green LED will flash twice a second. After three seconds, the green will flash rapidly for two seconds; the device has started logging.

To Stop Device: Press and hold the pushbutton and the red LED will flash twice a second; after three seconds, red will flash rapidly for two seconds; the device has stopped logging

Memory: 1,000,000 readings; software configurable memory wrap; 330,000 readings in enhanced start/stop mode

Wrap Around: Yes Reading Rate: 4 readings a second

(4 hz) to 1 reading every 24 hours

LED Functionality:

Green LED Blinks: 10 seconds

to indicate logging 15 seconds to indicate delay start mode

Red LED Blinks: 10 seconds to indicate low battery and/or memory 1 second to indicate an alarm condition



Input Types and Ranges

Input Ranges OM-CP-VOLT101A-160MV OM-CP-VOLT101A-2.5V OM-CP-VOLT101A-15V OM-CP-VOLT101A-30V

Voltage Range Voltage Resolution Calibrated Accuracy

Input Impedance Overload Protection Input Type

Indefinitely

For 10 seconds

±160 mV -3 to 3 Vdc -8 to 24 Vdc -8 to 32 Vdc

5 µV 0.1 mV 0.5 mV 1.0 mV

±0.01% ±0.05% ±0.05% ±0.05%

>1 MΩ 125 kΩ 125 kΩ 125 kΩ

±5V** ±50V* ±50V* ±50V*

Differential Single ended Single ended Single ended

Password Protection:

An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password

OM-CP-WATERBOX101A, optional weatherproof enclosure for data logger, shown smaller than actual size.

OM-CP-IFC200, Windows software displays data in graphical or tabular format.

Real Time Recording: May be used with PC to monitor and record data in real time

Calibration: Digital calibration through software

Calibration Date: Automatically recorded within device

Battery Type: 3.6V lithium battery (included) user replaceable

Battery Life: 10 years typical at a 15 minute reading rate

Data Format: Date and time stamped V, mV, V, engineering

Time Accuracy: ±1 minute/month (at 20ºC, stand alone logging)

Computer Interface:

USB (interface cable required); 115,200 baud

Software:

WIN XP SP3, VISTA and 7 (32 and 64-bit)

Operating Environment:

-40 to 80ºC (-40 to 176ºF) 0 to 95% RH non-condensing

Dimensions:

Data Logger:

36 H x 56 W x 16 mm D (1.4 x 2.2 x 0.6")

Waterbox Enclosure:

74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5")

Weight: 24 g (0.9 oz) Materials:

Data Logger: ABS Plastic Waterbox Enclosure:

Black anodized aluminum

units specified through software

MOST POPULAR MODELS HIGHLIGHTED!

To Order

Model No. Description

OM-CP-VOLT101A-2.5V Voltage data logger, -3 to 3 Vdc range OM-CP-VOLT101A-2.5V-CERT OM-CP-VOLT101A-15V Voltage data logger, -8 to 24 Vdc range OM-CP-VOLT101A-15V-CERT OM-CP-VOLT101A-30V Voltage data logger, -8 to 32 Vdc range OM-CP-VOLT101A-30V-CERT OM-CP-VOLT101A-160MV Voltage data logger, ±160 mV range range

OM-CP-VOLT101A-160MV-CERT OM-CP-IFC200 Windows software and 1.8 m (6') USB interface cable OM-CP-BAT105 Replacement 3.6V lithium battery

OM-CP-WATERBOX101A Weatherproof NEMA 4 (IP65) enclosure for data logger

Comes complete with 3.6V lithium battery. Operator’s manual and USB interface cable are included with the OM-CP-IFC200 Windows software (software is required to operate the data logger and is sold separately).

Ordering Example: OM-CP-VOLT101A-2.5V-CERT, voltage data logger, -3 to 3 Vdc with NIST calibration certificate and OM-CP-IFC200 Windows software and USB cable.

To Order, Call or Shop Online at omega.com

Visit omega.com/om-cp-volt101a for Pricing and Details

†

Voltage data logger, -3 to 3 Vdc with NIST calibration certificate

†

Voltage data logger, -8 to 24 Vdc with NIST calibration certificate

Voltage data logger, -8 to 32 Vdc with NIST calibration certificate

†

Voltage data logger, ±160 mV with NIST calibration certificate