Omega Products OM-CP-SHOCK-MAG-KIT User Manual

Temperature, Humidity, Pressure and Tri-Axial Shock Data Loggers
Part of the NOMAD

⻬ Built-In Accelerometers
⻬ All Inclusive Design
⻬ Compact
⻬ Programmable

Start Time

⻬ High Speed Download
⻬ Real-Time Operation
⻬ Reusable
⻬ User Friendly

The OM-CP-ULTRASHOCK
is a battery powered, stand alone
temperature, pressure, humidity
and 3-axis shock recorder.

The OM-CP-ULTRASHOCK
measures and records
temperature, pressure and
humidity at the selected reading
rates, while shock is recorded as
the peak acceleration levels over
the same interval.

The OM-CP-ULTRASHOCK
is specifically designed for
documenting dynamic
environments such as moving
vehicles, trucks, containers,
ships, etc. The device is also
valuable in characterizing
environments such as production
and assembly lines of delicate
electronics, IC fabrication,
communications and computer
components.

This compact, portable, easy to
use device will measure and
record up to 174,762
measurements per channel. The
storage medium is non-volatile
solid state memory, providing
maximum data security even if
the battery becomes discharged.
The device can be started and
stopped directly from your
computer and it’s small size
allows it to fit almost anywhere.

®

Family

OM-CP-ULTRASHOCK-50 data logger
shown smaller than actual size.

The OM-CP-ULTRASHOCK
makes data retrieval quick and
easy. Simply plug it into an empty
COM or USB port and our user­friendly software does the rest.

Specifications

TEMPERATURE
Sensor: Semiconductor
Range: -20 to 60ºC (-4 to 140ºF)
Resolution: 0.1ºC
Accuracy: ±0.5ºC (0 to 50ºC)

HUMIDITY
Sensor: Capacitive Polymer
Range: 0 to 95% RH
Accuracy: ±3% RH (±2% RH

Typical at 25°C)

Resolution: 0.1% RH
Specified Accuracy Range:

10 to 40°C; 10 to 80% RH

PRESSURE
Sensor: Semiconductor

strain gage

Range: 0 to 30 psia
Resolution: 0.002 psia
Calibrated Accuracy: ±1.0% FSR

25°C; ±0.2% typical

SHOCK
Accelerometer Type:

MEMS Semiconductor

Acceleration Range (g) ±5 ±50 ±100 ±250

Calibrated Accuracy (g) ±0.2 ±1 ±2 ±4

Acceleration Resolution (g) 0.01 0.05 0.

1 0.2

Sampling Rate:

1.953 millisecond (512 Hz)

Acceleration Frequency

Response: 0 Hz

to approximately 400 Hz
Readings: 64 readings every
second to 1 every 5 minutes
Recording Interval: 64 Hz to
5 minutes for shock, selectable
in software. Temperature,
pressure and humidity sampled
approximately every 2 seconds
at intervals shorter than 2
seconds. Otherwise, sampled
at the reading rate.
Memory: 174,762 readings
per channel
Start Mode: Immediate start
or delay start, up to 6 months
in advance

Real-Time Recording:

Device can be used with
PC to monitor and record
instantaneous measurements
in real-time

Pasword Protection:

An optional password may be
programmed into the device to
restrict access to configuration
options. Data may be read out
with the password
Calibration: Digital calibration
through software
Calibration Date: Automatically
recorded within device
Power: 9V lithium or alkaline
(battery included); user
replaceable

E-32

OM-CP-IFC200, Windows
software displays data in
graphical or tabular format.

Data Format:

Date and time stamped;
gravities (g and mg),
temperature (°C, °F, K, °R),
humidity (%RH, mg/ml water
vapor concentration),
pressure (psia, inHg, mm Hg, bar,
atm, torr, Pa, kPa, MPa)

Time Accuracy:

±1 min per month at 2 to 30°C

Battery Life: 3 to 7 days typical
with lithium battery, 1 min
reading rate @ 25°C

Computer Interface:

PC or USB (interface cable
required); 115,200 baud
Software: XP SP3/Vista and 7
(32-bit and 64-bit)

Operating Environment:

-20 to 60°C (-4 to 140°F)
0 to 95% RH non-condensing

Dimensions:

89 H x 111 W x 26 mm D
(3.5 x 4.4 x 1.0")

Weight: 341 g (12 oz)
Material: Anodized aluminum

MOST POPULAR MODELS HIGHLIGHTED!

To Order

(Specify Model Number)

Model No. Description

OM-CP-ULTRASHOCK-50 Tri-axial shock data logger, ±50 g
OM-CP-ULTRASHOCK-50-CERT Tri-axial shock data logger, ±50 g

with NIST calibration certificate

OM-CP-ULTRASHOCK-5 Tri-axial shock data logger, ±5 g
OM-CP-ULTRASHOCK-5-CERT Tri-axial shock data logger, ±5 g

with NIST calibration certificate

OM-CP-ULTRASHOCK-100 Tri-axial shock data logger, ±100 g
OM-CP-ULTRASHOCK-100-CERT Tri-axial shock data logger, ±100 g

with NIST calibration certificate

OM-CP-ULTRASHOCK-250 Tri-axial shock data logger, ±250 g
OM-CP-ULTRASHOCK-250-CERT Tri-axial shock data logger, ±250 g

with NIST calibration certificate

OM-CP-IFC200 Windows software and 3.7 m (12')

USB interface cable

OM-CP-BAT103 Replacement 9V lithium battery
OM-CP-SHOCK-MAG-KIT Magnet mount kit for data logger

Operator's manual and USB interface cable are included with the OM-CP-IFC200 Windows software (required to operate the data logger
and sold separately).

Ordering Example: OM-CP-ULTRASHOCK-50-CERT humidity, temperature, pressure and tri-axial shock data logger,
OM-CP-IFC200 Windows software with USB interface cable

E

E-2