OM-CP-RFPH101A
Wireless pH and Temperature Transmitter
Part of the NOMAD® Family
⻬ Multiple Transmitter Configurations
⻬ Works with OMEGA® PHE-4200
Series of pH Probes
⻬ Real-Time Operation
⻬ Automatic Temperature
Compensation
Automatically Converts a
⻬ PC into a Strip Chart Recorder
The OM-CP-RFPH101A is a miniature,
wireless, battery-powered, standalone
pH and temperature transmitter. This
portable, easy-to-use device will read
and transmit pH and temperature
measurements. When enabled, the
wireless transmitter will transmit
readings back to the host computer,
where the data can be analyzed in realtime. These readings are also logged to
the device’s memory for added data
security. A convenient slide switch turns
the transmitter on or off.
The OM-CP-RFPH101A is a major leap
in both size and performance.
Numerous units can be used to transmit
data to the same receiving station. The
Windows software converts a PC into a
real-time strip chart recorder. Data can
be printed in graphical and tabular
format or exported to a text or Microsoft
Excel file.
Specifications
TEMPERATURE CHANNEL
Temperature Sensor: pH electrode
with integral 100 Ω Pt RTD temperature
sensor or external 100 Ω Pt RTD
temperature sensor is required
(a 100 Ω resistor be used if temperature
compensation is not needed)
Measurement Range: -40 to 125°C
(-40 to 257°F); 0 to 500 Ω
Temperature Resolution:
0.01°C (0.001 Ω)
Calibrated Accuracy:
±0.1°C @ 25°C ambient (+
Input Connection:
Removeable screw terminal;
2, 3 or 4 wire
pH CHANNEL
pH Range: 0 to 14 pH
(-1000 to 1000 mV)
pH Resolution: 0.01 pH (0.1 mV)
Calibrated Accuracy: ±0.1 pH (±1 mV)
Input Connection: Female BNC jack
Input Resistance: 10
0.015 Ω)
12
Ω typical
OM-CP-RFC200A, Windows software displays data in graphical or tabular format
GENERAL SPECIFICATIONS
Start Time: Software-programmable
start time and date, up to six months
in advance
Real-Time Recording: Can be used
with PC to monitor and record data in
real-time
Memory: 13,107 readings per channel;
26,214 total readings; software
configurable memory wrap
Reading Interval: 1 reading every
30 seconds to 1 every 12 hours
Calibration: Digital calibration
through software
Data Format: Date and time stamped;
°C, °F, K, °R, Ω, pH, V, mV, engineering
units specified through software
Time Accuracy: ±1 minute/month
(20 to 30°C)
Computer Interface: PC serial,
RS-232C COM or USB interface cable
required); 57,600 baud
To Order
(Specify Model Number)
Model No. Description
OM-CP-RFPH101A Wireless pH and temperature transmitter
OM-CP-RFPH101A-CERT Wireless pH and temperature transmitter
OM-CP-RFC101A Receiver package includes RF receiver, 1.2 m (4')
OM-CP-RFC200A Receiver package includes RF receiver, 3.7 m (12')
OM-CP-BAT103 Replacement 9 V lithium battery
OM-CP-CONNECTOR-4 Replacement 4 position terminal block connector
Operator’s manual, battery, USB cable and receiving antenna are included with the
OM-CP-RFC200A Windows software (required to operate the data logger and sold separately).
NIST calibration for temperature only.
Ordering Example: OM-CP-RFPH101A-CERT wireless pH and temperature transmitter
with NIST calibration certificate, OM-CP-RFC200A Windows software and USB cable
with receiving antenna
OM-CP-RFPH101A
shown larger than
actual size
RF Baud Rate: 4800 baud
RF Carrier Frequency: 418 MHz
Maximum Output Power:
< 0dBm typical (<1mw)
Range: 36.6 m (120') line of sight
Power: 9 V lithium battery included
(user replaceable)
Battery Life: 1 year typical
(1-minute reading rate @ 25°C)
Weight: 113 g (4 oz)
Software: XP SP3/Vista and 7
(32-bit and 64-bit)
Operating Environment:
-5 to 50°C (23 to122°F)
5 to 95% RH non-condensing
Dimensions:
114 H x 61 W x 25 mm D + 51 mm
antenna
(4.5 x 2.4 x 1.0" + 2.0" antena)
Weight: (120 g) 4 oz
AVAILABLE FOR FAST DELIVERY!
with NIST calibration certificate
RS-232 cable with DB9F termination, Windows
software and operator’s manual
USB cable, Windows software and operator’s
manual
To Order, Call or Shop Online at omega.com
SM
1