Omega Products OM-CP-QUADSTATE User Manual

OM-CP-QUADSTATE Four-Channel
State Recorder

Part of the NOMAD®Family

⻬ Interfaces to Contact

Closures or TTL Signals
Up to 30 V

⻬ Real-Time Operation
⻬ Programmable Start Time
⻬ Programmable

Engineering Units

⻬ Memory Wraparound
⻬ Miniature Size

The OM-CP-QUADSTATE is a
four-channel, battery-powered,
standalone state recorder. This
portable, easy to use device will
read and record up to 52,428 state
changes. The OM-CP-QUADSTATE
senses input transitions or contact
closures from external sources such
as transducers and/or state
initiators, and it records the time
and input state of the device when a
transition occurs. The storage
medium is non-volatile solid state
memory, providing maximum data
security even if the battery becomes
discharged. The device can be
started and stopped directly from a
computer and its small size allows it
to fit almost anywhere.

The OM-CP-QUADSTATE makes
data retrieval quick and easy.
Simply plug it into an available
COM port and our user-friendly
software does the rest. The
software converts a PC into a
real-time strip chart recorder. Data
can be printed in graphical and
tabular format or exported to a text
or Microsoft Excel file.

Specifications

Input Connection:

4 removable screw terminals
Input Low: <0.4 V

Input High: >2.7 V
Input Range: 0 to 12 Vdc

continuous; (0 to 30 Vdc peak)

Duty Cycle Limitation:

24 V: 10%

(<6 seconds per minute)
18 V: 25%
(<15 seconds per minute)
12 V: 50%
(<30 seconds per minute)

Input Impedance: >1 KΩ

Time Resolution: 1 second

(reading rate dependent)

Engineering Units:

User can define units up to 10
characters in length. This value is
stored within the device.
Scale Factor: User can program
any desired scaling factor from
±1.000E-31 to ±9.999E+31.
The scaling factor is stored
within the device.
Start Modes: Software
programmable immediate start or
delay start up to six months in
advance
Reading Rate: 1 reading every
second to 1 every 12 hours
Memory: 52,484 state changes;
209,936 total readings; software
configurable memory wrap
Real-Time Recording: Can be
used with PC to monitor and record
data in real-time
Calibration: Digitial calibration
through software
Calibration Date: Automatically
recorded within device
Power: 9 V lithium or alkaline
battery included; user replaceable

Battery: 1 year typical

OM-CP-IFC200,
Windows
software
displays data
in graphical or
tabular format

Data Format: Date and time stamped

state changes (on/off); engineering
units specified through software
Time Accuracy: ±1 minute/month
(at 20°C, RS-232 cable not in use)
Computer Interface: PC serial,
or USB (interface cable required);
2400 baud
Software: XP SP3/Vista/Windows 7
(32 and 64-bit)

Operating Environment:

-20 to 60°C (-4 to 140°F)
0 to 95% RH non-condensing

Dimensions:

89 H x 111 W x 26 mm D
(3.5 x 4.4 x 1.0")
Weight: 370 g (13 oz)

AVAILABLE FOR FAST DELIVERY!

To Order Visit omega.com/om-cp-quadstate for Pricing

Model No. Description

OM-CP-QUADSTATE 4-channel state data logger
OM-CP-IFC110 Windows software and 1.2 m (4') RS-232

OM-CP-IFC200 Windows software and 1.8 m (6') USB

OM-CP-BAT103 Replacement 9 V lithium battery
OM-CP-CONNECTOR-2 Replacement 2 position terminal block connector

Operator’s manual is included with the OM-CP-IFC200 Windows software and USB cable
(required to operate the data logger and sold separately). To order data loggers with optional
120 Vac power, add suffix "-AC" to model number.
Ordering Example: OM-CP-QUADSTATE 4 channel state data logger and OM-CP-IFC200
Windows software with USB cable.

E-1

cable with DB9F termination

interface cable

OM-CP-QUADSTATE
data logger, shown
smaller than actual size