The LV3000/LV4000 Series
continuous level measurement
probes are flexible, cost-effective
solutions for applications involving
liquids, pastes, and some solids.
The built-in (one-piece) electronic
module provides a 4 to 20 mA
output (2-wire) signal that is
proportional to the process level.
Zero and span adjustment helps
account for various media, tank
dimensions, rod lengths, and
positions of installation.
OMEGA®offers these probes in
several different models. The user
must choose the probe that suits
his or her application and install it
in the proper location. When
submerged, the probe must be able
to produce enough capacitance
variance. The probe’s success
depends on these important factors:
A) Conductive materials can cause
a short circuit between a bare
stainless steel probe and the
tank wall. For this situation, we
recommend using PTFE sleeving
on the rod surface.
K-20
B) Material buildup affects the
K
accuracy of RF capacitive
measurements. Additional
adjustment to the probe’s sensitivity
is therefore recommended.
Housings must be compatible with
the requirements for hazardous,
washdown, wet, or dusty
environments. For explosion-proof
environments, the housing may
need to be certified. In addition, the
active probe might need to be
intrinsically safe or have an intrinsic
safety barrier.
The electronic circuitry of the probe
performs several functions, such as
rectifying and filtering the incoming
power, generating the radio
frequency signal, and measuring
the changes in current flow.
SPECIFICATIONS
(LV3000 SERIES)
Accuracy: 0.5%
Repeatability: ±1 mm
Level Indication:
Bar graph, 0 to 1000%
Process Connection:
3
1
/
4 to 1
/
2 NPT, Tri-Grip
TM
or flange
Wetted Material: 316 SS or PTFE
Enclosure Material: Aluminum die cast
Max Pressure: 290 psi (20 bar)
Operating Temperature: -10 to 120ºC
(14 to 248ºF)
Class Protection:
LV3000: NEMA 4 (IP65)
LVCN410: IP40
Max Probe Length: 1.8 m (6')
Dimensions:
Aluminum Die-Cast Head:
89 W x 108 mm H (3.5 x 4
Diameter of Probe: 16 mm (
Electrical Connection: Cable gland
1
with
/
2 NPT conduit
Note: The LV3000 Series probes require a
LVCN400 Series controller.
1
/
4")
5
/
8")
SPECIFICATIONS
(LVCN410 SERIES)
Operating Voltage: 24 Vdc, 110 or
240 Vac (50/60 Hz)
Current Consumption: 4 mA
Adjustment: Zero and span
(potentiometer) and 2 switch point
(potentiometer)
Range of Sensitivity: 50 to 1000 pF
Output: 4 to 20 mA and 2-relay SPDT
LVCN411/LVCN412:
73 W x 110 H x 110 mm L
7
(2
⁄8 x 43⁄8 x 43⁄8")
SPECIFICATIONS
(LV4000 SERIES)
Accuracy: 0.5%
Repeatability: ±1 mm
Operating Voltage: 12 to 30 Vdc
Adjustment:
Zero and span (potentiometer)
Range of Sensitivity: 100 to 5500 pF
Frequency Oscillation: 400 kHz
Output: 4 to 20 mA (2-wire)
Process Connection:
3
1
/
4 to 1
/
2 NPT, Tri-Grip or flange
Wetted Material: 316 SS or PTFE
Enclosure Material: Glass-filled nylon
or aluminum die cast
Max Pressure: 290 psi (20 bar)
Operating Temperature:
-10 to 120°C (14 to 248°F)
Class Protection: NEMA 4 (IP65)
Max Probe Length: 1.8 m (6')
Dimensions:
Nylon Head: 89 W x 64 mm H
(3.5 x 2.5")
Aluminum Die-Cast Head:
89 W x 108 mm H (3.5 x 4.25")
Diameter of Probe: 16 mm (
Electrical Connection:
Cable gland with
Note: The LV4000 Series probes require a
galvanic isolator, LI-420.
1
/
2 NPT conduit
5
/
8")
SPECIFICATIONS
(LI-420)
Input Current from the Evaluation
Instrument: 4 to 20 mA
Input Voltage: 22 to 24 Vdc
Output Current: 4 to 20 mA
Output Voltage to the Transducer
at 20 mA: 12.5 V
Output Voltage to the Transducer
at 4 mA: 15.5 V
Resistance per Conductor: 15 Ω
Testing Voltage:
Input/output circuit: 2000 V
Domestic Current Demand:
300 ±60 µA
Ambient Temperature:
-20 to 70°C (-4 to 158°F)
Enclosure Dimensions:
44 W x 82 H x 110 mm L
3
1
/
4 x 4
3
/
8")
(1
/
4 x 3
eff
LI-420, $390, shown
actual size.
LV4121-36, $1056, shown
smaller than actual size.
K-21
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model No.PriceDescription of Capacitance Transmitter with 4 to 20 mA Output and Switch
LV4111-24$966 60 cm (24") long probe with 3⁄4 NPT connection, with PTFE sleeving and nylon head
LV4121-36105690 cm (36") long probe with 1 NPT connection, with PTFE sleeving and nylon head
LV4121-4811461.2 m (4') long probe with 1 NPT connection, with PTFE sleeving and nylon head
LV4121-6012361.5 m (5') long probe with 1 NPT connection, with PTFE sleeving and nylon head
LV3123-48-HT36481.2 m (4') long probe with 1 NPT connection, with high temperature PTFE sleeving and
LVCN41180524 Vdc powered controller with relay and 4 to 20 mA output for LV3000 Series only
LVCN412840115 Vac powered controller with relay and 4 to 20 mA output for LV3000 Series only
Accessories
Model No.PriceDescription
CNI16D33$245
TX4-1003530 m (100') spool of 4-conductor wire
FPW-157515 Vdc power supply
LI-420390Loop isolator (required for the LV4000 Series)
Custom Models Available
Model No.Base PriceDescription for Built to Order Unit
LV4XYZ-LENGTH (inches)$720Custom capacitance system, specify X, Y, Z from Options
LV3XYZ-LENGTH (inches)600Custom remote capacitance system, requires LVCN410 Series remote
Specify all length in inches. Maximum length is 72" (6') for LV4000/LV3000.
aluminum die-cast head, 177°C (350°F); Remote electronics required LVCN410 Series
1
⁄16 DIN dual display with two 3 A relays and 24 Vdc excitation
1$6Glass-filled nylon with 1⁄2 NPT conduit entry and cable gland
2390LV4000 Aluminum die cast with 1⁄2 NPT conduit entry
3396LV4000 Aluminum die cast with cable gland entry
4102LV3000 Aluminum die cast with 1⁄2 NPT conduit entry
5108LV3000 Aluminum die cast with cable gland entry
Length of Rod (-LENGTH)
Specify Inches$30/ftLength of rod
High Temp to 350ºF (-HT)
Add “-HT” to Model No.$180High temperature to 177°C (350°F)
Comes with complete operator’s manual.
High temperature PTFE sleeving available for temperatures up to 200ºC (382ºF). For PTFE sleeving add suffix “HTPTFE” to model number and
*
add $660/ft to price.
Ordering Examples: LV4111-24, 60 cm (24") level transmitter, CNi16D33, process controller, and TX4-100, multiconductor wire, $966 + 245 + 35 = $1246.
LV4121-36, 90 cm (36") level transmitter, FPW-15, power supply, $1056 + 75 = $1131.
*
K
Recommended Reference Book: Water Wells and Septic Systems Handbook
FW-300, $100. Visit omega.com/bobi for Additional Books
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.