HIGH LEVEL INDICATOR
LV160 Series
Starts at
$
175
⻬ Adjustable Versions for
Various Tank Sizes
⻬ Rugged Construction
⻬ Standard 2 NPT
Mounting
The LV160 Series high level
indicators have a 2 NPT mounting,
making them ideal for use in
underground and aboveground
storage tanks. When mounted
vertically at the tank top, the unit
reliably indicates high liquid level.
The unit’s rugged construction and
multiple design options make it
adaptable for just about any
environment. The indicator is
available in brass or stainless steel,
making it suitable for use with a
wide range of liquids.
Adjustable versions are available for
varying tank sizes. A special cinch
nut on the mounting allows the stem
to travel up or down to fine-tune
actuation points. The extent of the
adjustment depends on the unit’s
length and distance from the
mounting to the highest float stop.
The LV160 Series is offered in
integral 1 foot lengths. For other
lengths, adaptor systems are
available. They consist of 2 parts: the
LVR-CBR coupling (2 x 2 FNPT) and
an LVR-B pipe nipple (2 x 2 MNPT)
of various lengths to change the
insertion depth of the sensor. When
using the adaptors, retaining clip
pliers are required to remove the
float for installation.
Nitrile Float
SPECIFICATIONS
Wetted Materials:
Stem and Mounting:
Brass or 316 stainless steel
Float: Buna or 316 stainless steel
Operating Temperature:
Brass with Buna:
Water: up to 82.2°C (180°F)
Oil: -40 to 110ºC (-40 to 230°F)
316 SS: -40 to 148.9ºC (-40 to 300ºF)
Pressure Limitations: Up to 150 psig
for Buna float units or when used with
316SS adaptors; up to 750 psig for
316SS float units.
Accuracy: ±3.2 mm (0.25")
Switch Rating: 20 VA, 120-240 Vac
pilot duty; 20 W, 50-240 Vdc resistive
Cable: 24" 2-Conductor PVC jacketed
Weight: 0.7 kg (1.5 lb) + 3.7 g/cm
(0.25 lb/ft) for indicators; 0.7 kg (1.5 lb)
for LVR-CB
Actuation Level
LO ± 1.6 mm
(0.0625")
Length Overall
Actuation
Level
63.5
(2) Min
Dimensions: mm (in)
316SS Float
Adjustable
Mount
Assembly.
LV161,
$175.
Both shown
smaller than
actual size.
LV161SS-A,
$440.
46
13
⁄16)
(1
47.6
7
(1
⁄8) DIA
Min. Liquid Specific Gravity: 0.55
50.8
(2)
53.3
3
(2
⁄32)
52.4
(21⁄16)
Min. Liquid Specific Gravity: 0.75
K-61a
Retaining Clip
Typical Wiring Diagrams
See Note “D” below
Hazardous
Area
Black
No Dry
or
NC Dry
See Note “E” below
No Dry
or
NC Dry
See Note “F” below
Single I.S. RELAY
No Dry
or
NC Dry
Red
2-Conductor
Cable
Hazardous
Area
Black
Red
2-Conductor
Cable
Hazardous
Area
Black
Red
2-Conductor
Cable
Non-Hazardous
Area
2
3
Non-Hazardous
Area
Supply Barrier
Non-Hazardous
3
3
Area
2
2
Signal Return
Barrier
Load
Intrinsically
Safe Relay
1
1
1
Sense
Resistor
Fuse*
DC
Power
Supply
Annunc.
DC
Power
Supply
Annunc.
Fuse
Neutral
Fuse
Mounting Types
(11⁄4) REF
11⁄2 REF
Hot
Vac
Vac
Standard
31.75
38.1
LVR-B Pipe Nipples
LVR-CB Coupling
Adjustable Option
Liquid Tight
Fitting
31.75
2 NPT
Dimensions: mm (in)
(11⁄4) REF
38.1
11⁄2 REF
2 NPT
Adjustment
Nut
2 NPT
D: Non-isolated System-Zener Barrier
E: Isolated System-Zener Barrier
F: If two signal lines must be maintained above ground potential,
an individual zener barrier is required per single line
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model No.)
Brass/Buna 316 SS
Std Mount Std Mount
Model No. Price Model No. Price “LO” Length
LV161 $175 LV161SS $340 0.3 m (1')
LV162 200 LV162SS 400 0.6 m (2')
LV163 225 LV163SS 475 0.9 m (3')
LV164 250 LV164SS 525 1.2 m (4')
LV165 275 LV165SS 600 1.5 m (5')
LV166 300 LV166SS 650 1.8 m (6')
125 lb. Brass Pipe Nipples
Model No.
LVR-B4 $14 1 lb 2
LVR-B5 19 1
LVR-B6 23 1
Comes complete with operator’s manual.
For units with adjustable mount, add suffix “-A” to model number, and $70 for brass units and $100 for 316 SS units.
Ordering Examples: LV163, level switch with brass/buna construction and “LO” length of 36", $225.
LV166SS-A, level switch with all 316 SS construction, adjustable mount, and an “LO” length of 72", $650 + 100 = $750.
LVR-B11, brass nipple and LVR-CB, brass coupling $44 + 35 = $79. This adaptor system will decrease overall insertion length by 9
Price
Weight
3
lb 3
⁄
8
3
lb 4
⁄
4
Accessory
Model No.Price Description
LVR-CBR $35 125 lb. brass
coupling with
2 x 2 FNPT
Insertion Insertion Insertion
Length Length Length
Change Model No. Price
5
" LVR-B7 $26 2 lb 5
⁄
8
5
" LVR-B9 36 2
⁄
8
5
" LVR-B11 44 3
⁄
8
Weight
1
lb 7
⁄
2
1
lb 9
⁄
4
Change Model No. Price
5
" LVR-B13 $52 3
⁄
8
5
"
⁄
8
5
"
⁄
8
Weight
3
lb 11
⁄
4
K-61b
Change
5
"
⁄
8
5
".
⁄
8
K