Omega Products LDP63100-E User Manual



LDP63100 Series

digits

EXTRA LARGE DISPLAY METER

FOR PROCESS OR STRAIN GAGE BRIDGE INPUT

LDP63100-E, $700, shown smaller than actual size.

Starts at

700

⻬ Large 101 mm (4")

LED Display Readable to 54 m (180')

⻬ Various Input Types

Available

⻬ Field Installable

Alarms, Analog Outputs, and Communication

⻬ Programmable

User Inputs

⻬ Universal 85 to

250 Vac Powered

⻬ NEMA 4X (IP65) Face

The LDP63100 is a versatile display that can increase productivity by offering the plant floor or production area a large visual display of their current status. Whether your measurement is voltage, current, process, or weight the LDP63100 can satisfy your requirement. The LDP63100 accepts various analog inputs which allow the unit to adapt to most any application. Additional plug-in option cards can add alarms, analog output, and communication/bus capabilities, making the LDP63100 a truly intelligent panel meter.

PROCESS INPUTS

INPUT ACCURACY ACCURACY IMPEDANCE/ CONTINUOUS DISPLAY RANGE (18 TO 28°C) (0 TO 50°C) COMPLIANCE OVERLOAD RESOLUTION

20 mA 0.03% of rdg 0.12% of

(-2 to 26 mA) +2 µA rdg +3 µA 20 Ω 150 mA 1 µA 10 Vdc 0.03% of rdg 0.12% of

(-1 to 13 Vdc) +2 mV rdg +3 mV 500 kΩ 300V 1 mV

STRAIN GAGE BRIDGE INPUTS

INPUT ACCURACY ACCURACY IMPEDANCE/ CONTINUOUS DISPLAY RANGE (18 TO 28°C) (0 TO 50°C) COMPLIANCE OVERLOAD RESOLUTION

24 mVdc rdg +3 µV rdg +4 µV 100 MΩ 30V 1 µV

240 mVdc +30 µV +40 µV 100 MΩ 30V 10 µV

0.02% of 0.07% of

0.02% of rdg 0.07% of rdg

The unit is a large display, designed to be remotely mounted and therefore does not have a programming keypad. Unit programming can be accomplished by the use of external switches that can be wired via the terminal block to allow unit programming. A minimum of 3 switches would be required. A remote programming option provides a 3 m (10') interconnecting cable and programming box allowing easy programming of the display

MAX

D-51



Dimensions: mm (in)

629

(24.77)

(7.22)

118

(4.65)

91.5

(3.60)

154.7 (6.09)

INSTRUMENTATION

SPECIFICATIONS

Display: 101 mm (4") Red LED,

5-Digit, (-19999 to 99999) Power Requirements: 85 to 250 Vac,

50/60 Hz, 18 VA

Excitation:

Process: 24 Vdc @ 50 mA,

± 5% regulated Strain: selectable 5 Vdc @ 65 mA

or 10 Vdc @ 125 mA (± 2%)

Operating Temperature Range:

0 to 50°C (32 to 122°F)

Storage Temperature Range:

-40 to 60°C (-40 to 140°F)

Operating and Storage Humidity:

0 to 85% max RH (non-condensing)

Altitude: Up to 2000 m (6561') Enclosure Rating: IP65 Face only Connections: High compression

cage-clamp terminal blocks (30-12 AWG wire)

Construction: Aluminum with textured black polyurethane paint; gasket and mounting nuts included

Dimensions: 629 x 183 x 118 mm (24.77 x 7.22 x 4.65")

Panel Cutout: 604.3 x 158.2 mm (23.79 x 6.23")

Panel Thickness: 1.57 to 9.5 mm (0.060 to 0.375")

Weight: 2.25 kg (5 lbs)

OPTION BOARD

COMMUNICATIONS CARDS

RS232/RS485

Isolation to Sensor and User Input Commons: 500 Vrms for 1 min

Working Voltage: 50V (not Isolated

from all other commons)

Baud Rate: 300 to 19.2k Data Format: 7/8 bits; odd, even,

or no parity working Voltage: 50V

RS232 Communication Card

Type: RS232 half duplex

RS485 Communication Card

Type: RS485 multi-point balanced

interface Bus Address: 0 to 99,

max 32 meters per line Transmit Delay: Selectable;

2 to 50 msec or 50 to 100 msec

MODBUS

Type: RS485; RTU and ASCII MODBUS

modes

Isolation To Sensor and User Input Commons: 500 Vrms for 1 minute

Working Voltage: 50V (not isolated from

all other commons)

Baud Rates: 300 to 38400 Data: 7/8 bits Parity: No, Odd, or Even Addresses: 1 to 247

D-52

Transmit Delay: Programmable

ANALOG OUTPUT CARD

Types (User Selectable): 0 to 20 mA,

4 to 20 mA and 0 to 10 Vdc

Isolation to Sensor and User Input Commons: 500 Vrms for 1 min

Working Voltage: 50V (not isolated from

all other commons) Accuracy: 0.17% of FS (18 to 28°C);

0.4% of FS (0 to 50°C)

Resolution: 1/3500 Compliance:

10 Vdc: 10 kΩ load min

20 mA: 500 Ω load max

Update Time: 200 msec max to within

99% of final readout value (digital filter and internal zero correction disabled) 700 msec max (digital filter disabled, internal zero correction enabled)

SETPOINT OUTPUT CARDS

(Four Types of Field Installable Cards) Response Time: 200 msec max

to within 99% of final readout value (digital filter and internal zero correction disabled) 700 msec max (digital filter disabled, internal zero correction enabled)

Dual Relay Card (LDP6-CDS10):

Type: Two FORM-C relays Isolation to Sensor and User Input

Commons: 2000 Vrms for 1 min

+ 3 hidden pages