Zero Offset: 0.5% FS
Operating Temperature:
-55 to 150°C (-67 to 302°F)
Compensated Temperature:
-55 to 150°C (-67 to 302°F)
Thermal Effects:
Zero: 0.025%/°C
Sensitivity: 0.020%/°F
Electrical Termination:
0.3 m (12") leads
Electrical Connections:
Yellow/Black: Excitation
Yellow/Red: Excitation
Black: + Signal
Red: Signal ground; connect blue
and green together
Nominal Linearity—Typical 2.5 kHz Sensitivity
Range % of Full Scale @ 2.5 kHz—Nom.
MODEL NO. mm in 50% 100% 125% 150%
mV/V/mm mV/V/0.001"
LD200-1.25 ±1.55 ±0.06 0.10 0.25 0.25 0.50 250 6.35
LD200-2.5 ±2.50 ±0.10 0.10 0.25 0.25 0.50 180 4.50
LD200-5 ±5.00 ±0.20 0.10 0.25 0.25 0.50 100 2.54
LD200-7.5 ±7.50 ±0.30 0.10 0.25 0.25 0.50 57 1.40
LD200-10 ±10.0 ±0.40 0.10 0.25 0.25 0.40 35 0.90
* See omega.com for compatible instruments.
Comes with complete operator’s manual.
Ordering Example: LD200-5, LVDT displacement transducer with a range of ±5 mm
(±0.20"), $205.
Low Cost—High Linearity
Rugged Construction for
Machine Tools and Vehicles
Large Core Clearance for
Easy Installation
Compatible with Standard
AC LVDT Instruments
Cores are Reversible
and Interchangeable
LD200-10, $260,
shown smaller than
actual size.
LD200-7.5, $225, shown
smaller than actual size.
±1.25 TO ±10.0 MM
(±0.050 TO ±0.400")
MECHANICAL
Core Mass:
LD200-1.25: 3.7 g (0.13 oz)
LD200-2.5: 6.2 g (0.22 oz)
LD200-5: 9.1 g (0.32 oz)
LD200-7.5: 11.3 g (0.40 oz)
LD200-10: 14.2 g (0.50 oz)
Core Thread: 6-40 UNF
Core Material: NiFe—Radio Metal 50
Radial Core Clearance: 1.6 mm (0.062")
Case Material: 400 Series SS
Case Weight:
LD200-1.25: 33 g (1.16 oz)
LD200-2.5: 43 g (1.52 oz)
LD200-5: 48 g (1.73 oz)
LD200-7.5: 71 g (2.50 oz)
LD200-10: 74 g (2.61 oz)
LD200 Series
Starts at
$
115
The LD200 Series AC-powered LVDT
displacement transducers are ruggedly
constructed, delivering high performance at
a low cost. Along with a broad measurement
range, from 1.25 to 10 mm (0.05 to 0.40"),
these transducers have high resolution and
repeatability.
The coils are wound on a rugged bobbin
housed in a stainless steel case. Epoxybonded construction makes these devices
suitable for applications involving wet or oily
environments, or high levels of mechanical
stress (vibration, shock, etc.). The armature
assembly ensures friction-free movement
within the sensor because of the large radial
clearance of the bore.
These transducers offer excellent linearity,
low levels of residual voltage, and good
temperature coefficients. They are thus ideal
for most industrial or general purpose
displacement measurement applications.
SPECIFICATIONS
ELECTRICAL
Linearity: See chart
Sensitivity: See chart (mV/V/mm)
Excitation: 1 to 10 Vrms
Excitation Frequency: 1 to 10 kHz
Energizing Current: <40 mA
Frequency Response:
10% of excitation frequency
MODEL NO. PRICE COMPATIBLE INSTRUMENTS*
LD200-1.25 $115 DP-LVDT, LDX-2, LDX-3A, LDX-4
LD200-2.5 165 DP-LVDT, LDX-2, LDX-3A, LDX-4
LD200-5 205 DP-LVDT, LDX-2, LDX-3A, LDX-4
LD200-7.5 225 DP-LVDT, LDX-2, LDX-3A, LDX-4
LD200-10 260 DP-LVDT, LDX-2, LDX-3A, LDX-4
To Order
(Specify Model Number)
MOST POPULAR MODELS HIGHLIGHTED!