Omega Products LC701-1K User Manual

FF
13
(0.50)
FLATS
3/8-24 UNF, BOTH ENDS
16
(0.625)
DIA.
32 DIA.
(1.25)
LC701/LC711
LCM701/LCM711 M10 x 1.00 - 6H, BOTH ENDS
9.7 (0.37) TYP.
2 m (6') 4-CONDUCTOR
80
(3.13)
LOW-CAPACITY TENSION LINK LOAD CELLS
STANDARD AND METRIC MODELS
LC701/LCM701 Series LC711/LCM711 Series
Calibrated in Tension 0-100 lb to 0-2000 lb 0-50 kgf to 0-1000 kgf
STANDARD
All Models
LC701-100, $595, shown actual size.
$
595
LC701/LCM701 units with cable.
Standard
INTERNAL THREAD DESIGN
METRIC
LC711-100, $595, shown actual size.
LC711/LCM711 units with twist-lock connector.
All Stainless Steel
Construction
Accuracy 0.15%Rugged Design for
The LC701/LCM701 Series tension links have a 2 m (6') cable with stripped end termination. The LC711/LCM711 Series units have an integral connector on the body. These stainless steel load cells are ideal for measuring in-line tension forces. Applications include cables on cranes, support rods in architectural designs, engine test beds, and industrial weighing.
SPECIFICATIONS
Output: 3 mV/V ±0.25 % FSO Excitation: 10 Vdc (15V max) Linearity:
>100 lb: ±0.10% FSO
100 lb: ±0.20% FSO Hysteresis: ±0.10% FSO Repeatability: ±0.05% FSO Zero Balance: ±1.0% FSO Operating Temp. Range:
-46 to 121°C (-50 to 250°F)
Compensated Temp. Range:
16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.0045% FSO/°C
Span: ±0.007% rdg/°C Safe Overload: 150% of capacity Ultimate Overload: 300% of capacity
Dimensions:
mm (in)
Wire PIN Connection
GN A +Output WT B -Output BK C&E -Input RD D&F +Input
Bridge Resistance: 350 Ω Full Scale Deflection: 0.025 to 0.102 mm
(0.001 to 0.004")
Protection Class: IP65 Construction: Stainless steel
F-64
LOAD CELLS
Electrical:
LC701/LCM701: 1.8 m (6') insulated
4-conductor shielded cable LC711/LCM711: DT02H-10-6P
integral connector; mating connector sold separately,
PT06F10-6S, $26.50
Weight: 0.45 kg (1 lb)
LOW-CAPACITY TENSION LINK LOAD CELLS
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
CAPACITY MODEL NO. MODEL NO. PRICE COMPATIBLE METERS*
STANDARD MODELS
100 lb 45 kgf LC701-100 LC711-100 $595 DPiS, DP41-S, DP25B-S 250 lb 114 kgf LC701-250 LC711-250 595 DPiS, DP41-S, DP25B-S
750 lb 341 kgf LC701-750 LC711-750 595 DPiS, DP41-S, DP25B-S 1000 lb 455 kgf LC701-1K LC711-1K 595 DPiS, DP41-S, DP25B-S 2000 lb 909 kgf LC701-2K LC711-2K 595 DPiS, DP41-S, DP25B-S
METRIC MODELS
50 kgf 110 lb LCM701-50 LCM711-50 $595 DPiS, DP41-S, DP25B-S 500 kgf 1100 lb LCM701-500 LCM711-500 595 DPiS, DP41-S, DP25B-S
1000 kgf 2200 lb LCM701-1K LCM711-1K 595 DPiS, DP41-S, DP25B-S
ACCESSORIES
MODEL NO. PRICE DESCRIPTION REC-038M $25.00 PT06F10-6S 26.50 Mating connector for LC711/LCM711 series load cells
Comes complete with 5-point NIST-traceable calibration and 59 kshunt data. * See section D for compatible meters. Ordering Examples: LC701-1K, 1000 lb capacity tension link with 2 m (6') cable, $595. LC711-250, 250 lb capacity tension link with integral connector on the body, $595. LCM701-1K, 1000 kgf capacity tension link with 2 m (6') cable, $595. LCM711-50, 50 kgf capacity tension link with integral connector on the body, $595. PT06F10-6S, mating connector (sold separately), $26.50.
CABLE STYLE CONNECTOR STYLE
3
-24 male rod end
8
MAKE IT WIRELESS!
ADD WIRELESS CAPABILITY TO YOUR PROCESS MEASUREMENT SYSTEM!
Wireless Connections From Your Sensor to Your Instrumentation:
Thermocouple, RTD,
Infrared Temperature, Humidity, pH, as well as Process Voltage/Current
Easy to Install and UseCapable of Distances
up to 120 m (400')
UWTC-1, $125.
Both models shown smaller than actual size.
UWTC-REC2, $235, available with 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc and Type K thermocouple output.
Comp
For
et
D
Wireless
Section W
F-65
e
t
e
l
e
e
ls S
i
a
Laptop not included.
WRS232-USB wireless transmitter, $159, shown close to actual size.
Wireless Communications From Your Instrument to a PC:
Convert the RS232
Signal on Your Meter, Controller or PLC
Works with any PC
with a USB Port
Easy to Install with
Seamless Operation
Capable of Distances
up to 120 m (400')
Loading...
+ 1 hidden pages