Standard Panel Jacks
Color-Coded; Glass-Filled Nylon
Rated to 220°C (425°F)
FREE ID Number
Labels and Dust Cap
Supplied with
Each Jack
Heavy
Duty!
JP Series
U Easy Installation
U Flexibility
U ID Labels Included
for Identification
U Decorative–Enhances
Any Instrument
U Combination Phillips/
Slot Screws
U Alloys of the
Inserts Match ANSI
Thermocouple
Grade Calibrations
OMEGA’s panel jacks contain
two female, collet-type, springloaded connectors that will accept
any standard male thermocouple
connector. The panel jacks are
molded of high-impact, glassfilled nylon and are numbered and
labeled as well as
color-coded.
Rugged
metal
mounting
hardware
included.
30.2
(1.19)
Rear
View
Rugged securing
clips included.
Panel Mounting Adaptor Plates
...for mounting a single panel jack in a round knock-out hole
Shown smaller than actual size
16.0
(0.63)
44.5
(1.75)
19.1
(0.75)
Model JP will accept solid or
stranded wire up to size 14 AWG.
Model No. RJACL
Mounting plate used with OMEGA®
Knock-out hole
33.3 (1.31)
dia.
type JP decorator styled, colorcoded panel jacks adapts them for
mounting as single-circuit jack in
control panel or instrument case.
46.0
(1.81)
Simplifies mounting, and holds the
connector in place tightly. Covers
33.3 mm (1.31") diameter knock-out
hole. All adaptor plates are made
of 0.76 mm (0.030") nickel-plated
36.3
(1.43)
mm (inch)
steel. Price includes all screws and
mounting hardware.
Dimensions: mm (inch)
Panel Cut-Out
16.3
(0.64)
30.4
(1.2)
Extra supply of our
patented design
dust caps, SPJ-CAP.
We make running changes
when technical advances allow.
Check at time of ordering
for additional features.
Discount Schedule
1-10 .................................. Net
11-49 ................................ 5%
50-99 ................................ 10%
100-999 ............................ 15%
1000-4999 ........................ 20%
5000 and over................... 25%
Extra Mounting Clips Available.
Model MH-JP-1
Model MH-JP-5
Extra ID Number Labels:
Model 1-6L, 1 thru 6
Model 1-12L, 1 thru 12
Model 1-18L, 1 thru 18
Model 1-24L, 1 thru 24
Model 1-50L, 1 thru 50
Model 1-100L, 1 thru 100
24.6 mm (.97")
Depth
To Order visit omega.com/jp for Pricing and Details
Type of
Alloy Thermocouple Used
†
Code
With Connector + – Color (Female)
®
CHROMEGA
Copper-Constantan Copper Constantan Blue JP-T-F
Iron-Constantan Iron Constantan Black JP-J-F
CHROMEGA
Pt-Pt/13%Rh Copper Alloy #11 Green JP-R/S-F
W-W/26%Re 200 226 Red JP-G-F
W/5%Re-W/26%Re CPX CNX Red JP-C-F
W/3%Re-W/25%Re 203 225 Red JP-D-F
Uncompensated Copper Copper White JP-U-F
Comes complete with rugged securing clips, metal mounting hardware, ID labels and dust cap.
†
K, T, J, E, R, S and B are ANSI designations.
Note: Type U (uncompensated) connectors are used with Type B thermocouples (Platinum/6%
Rhodium‑Platinum/30% Rhodium).
Ordering Example: JP-K-F, panel jack per use with Type K female connector.
-ALOMEGA® CHROMEGA® ALOMEGA® Yellow JP-K-F
®
-Constantan CHROMEGA
G-41
Compensating Alloy
Used in Connector
®
Constantan Purple JP-E-F
Model
Shell Number