ELECTROPNEUMATIC CONVERTERS
CURRENT TO PRESSURE (I/P)
IP411 Series
IP413 Series
Starts at
$
160
Integral Dial Control
Pressure Indicator
Manual Override
Available
Solenoid Valve Design
Eliminates Leaks
Can be Used with
Unfiltered Main Air
Supply
Zero and Span
Adjustments for Field
Calibration
The IP411 and IP413 accept
4 to 20 mA, 0 to 10V, and 0 to 5V
signals and convert these analog
signals to proportional linear
pneumatic outputs (3 to 15 or
0 to 20 psi). Unlike other units that
bleed air to maintain pressure, the
IP411 and IP413 use a silicon
pressure sensor and an
electropneumatic converter to
provide the desired pneumatic
pressure without constant air
consumption. The converter’s
unique design eliminates common
problems such as hose chatter and
L-3
IP413-020, $180, shown
larger than actual size.
needless air consumption from air
leaks caused by heat, age,
moisture, contamination, mounting,
orientation error, sticky valves,
valve leakage, and blockages. The
IP411 and IP413 provide a reliable,
repeatable, and accurate means of
converting an electrical signal into
a pneumatic pressure. A sourcing
controller is required.
84
(3.30)
BRANCH MAIN
83 (3.25)
ELECTROPNEUMATIC CONVERTERS
80
(3.25)
70
(2.75)
6.0 (0.25)
15 (0.5)
40
(1.625)
55
(2.25)
Three 3 (0.125)
mounting holes
SPECIFICATIONS
Supply Voltage: 18 to 28 Vdc or Vac
Supply Current: 150 mA/3 VA
Accuracy: 1% FS
Zero Adjustment: ±50%
Span Adjustment: ±25%
Operating Temp: 0 to 70°C
(32 to 160°F)
ompensated Temp: 0 to 70°C
C
(32 to 160°F)
Thermal Effects:
Zero: ±0.025% FS/°F
Span: ±0.01% FS/°F
Max Supply Pressure: 40 psig
Dimensions: mm (in)
Min Supply Pressure: 0.1 psig above
maximum control pressure
Solenoid Type: Floating poppet
Solenoid Coil: 3 W
Flow Rate: 0.5 SCFM
ressure Port: Hose barb fits
P
.76 mm (
4
Minimum Control Pressure Tubing
Length: 3 m (10')
Electrical Connector: Screw terminals
Weight: 350 g (12 oz)
Manifold Material: Aluminum
Case: 16-gage steel
3
) ID tubing
⁄16"
Order with
TX4-100
shielded wire,
$35 per 100'.
Shown smaller
than actual size.
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
MODEL NO. PRICE INPUT RANGES OUTPUT RANGE MANUAL OVERRIDE
IP411-X15 $160 4 to 20 mA, 0 to 5V, 0 to 10V 3 to 15 psig No
IP411-020 160 4 to 20 mA, 0 to 5V, 0 to 10V 0 to 20 psig No
IP413-X15 180 4 to 20 mA, 0 to 5V, 0 to 10V 3 to 15 psig Yes
Comes complete with operator’s manual.
Ordering Example: IP413-X15, electropneumatic converter with 3 to 15 psig output and manual override, TX4-100, 30.48 m (100') of
4-conductor wire, $180 + 35 = $215.
IP413-020 180 4 to 20 mA, 0 to 5V, 0 to 10V 0 to 20 psig Yes
ACCESSORY
TX4-100 $35 30.48 m (100') of 4-conductor shielded wire
L-4
VALVES AND REGULATORS
L