Omega Products HYP0-33-1-K-G-60-SMPW-M User Manual

THERM HYP-1

Hypodermic and

THERM HYP-1

Hypodermic and

Mini Hypodermic Probes

Mini Hypodermic Probes

Thermocouple and RTD Elements

Thermocouple and RTD Elements

All probes were designed for
industrial, laboratory, manufacturing
and chemical research only. They

are not intended for medicinal
use, or on humans. OMEGA

assumes no responsibility if these
products are used for medicinal
purposes, or on humans, or are
misused in any way.

HYP Series

OMEGA® Hypodermic Needle
Temperature Probes are
designed for industrial, laboratory,
manufacturing and chemical
research applications. Five probe
types are available, with diameters
from 0.2 to 1.65 mm (0.008 to

0.065"). The HYP0, HYP1 and
HYP2 have type T (Copper­Constantan) thermocouple elements,
while the HYP3 is available in J, K, T
or E calibration, and the HYP4 has a
100 Ω Platinum RTD (a = 0.00385).

Thermocouple Probe Model HYP0

The HYP0 mini-hypodermic probe with a needle
diameter of only 0.2 mm (0.008") is the least likely
to disturb the surrounding insertion area. Binocular
microscope micro-manufacturing techniques result
in an extremely small Type T (copper-constantan)
thermocouple being implanted in a 33 gauge,
25 mm (1") long stainless steel hypodermic
needle. The HYP0 has the fastest response of
the hypodermic probes, and has a continuous
temperature rating of 200°C (400°F). It has 1.5 m
(5') long PFA-coated, 36 AWG leads with an
SMP-type miniature connector.

The HYP0 is a mini-hypodermic
probe, with 0.2 mm (0.008")
diameter. The HYP1 has an OD of

0.3 mm (0.012"), and has an added
feature of being steam autoclavable
to temperatures up to 160°C (325°F).
The HYP3 and HYP4 are industrial
probes, with thermocouple and RTD
elements respectively.

The HYP0 Mini Hypodermic probe
with a needle diameter of only

0.2 mm (0.008") is the least likely
to disturb the surrounding insertion

Miniature
connector.

WIRELESS

See Section W

area. Binocular microscope micro­manufacturing techniques result in
an extremely small type T (Copper­Constantan) thermocouple being
implanted in a 33 gage, 25 mm (1")
long stainless steel hypodermic
needle. The HYP0 has the fastest
response of the hypodermic probes,
and has a continuous temperature
rating of 200°C (400°F). It has 1.5 m
(5' long PFA coated, 36 AWG leads
with an SMP type subminiature
connector.

Dimensions: mm (inch)

With shrink tubing
not shown

18.25
(0.72)

1.57

(0.062) O.D.

25
(1)

0.20

(0.008) O.D.

To Order visit omega.com /hyp_probes for Pricing and Details

Model No. ANSI Color Code

HYP0-33-1-(*)-G-60-SMPW-M

Specify calibration: K, or T. T = Copper-Constantan, K = CHROMEGA®-ALOMEGA®

*

Lead wire lengths over 1.5 m (60") at an additional cost/300 mm (12") and modify
model number.
Ordering Example: HYP0-33-1-T-G-60-SMPW-M, mini hypodermic probe with
Type T grounded thermocouple, 1.5 m (5’) long bead wire, and a miniature
SMPW male connector.

Thermocouple Probe Model HYP1

OMEGA® Research, autoclavable probe is designed to
give instant readings in plants, other semi-solids and
liquids. A 30 gage x 15 mm needle provides this very
fast response. The measurable temperature range is
cryogenic to 200°C (400°F). This is a Type T (Copper­Constantan) grounded-junction probe with PFA insulated
extension wire and a subminiature male connector
termination. The entire assembly is steam autoclavable
to a temperature of 160°C (325°F). All probes have

1.5 m (5') leads.

Dimensions:
mm (inch)

18.25
(0.72)

With shrink tubing
not shown.

1.57

(0.062) O.D.

15.08
(0.59)

0.30

(0.012) O.D.

A-93

Subminiature Probe

These probes should not be used for
human implantation

Model No. ANSI Color Code

HYP1-30-1/2-(*)-G-60-SMPW-M

Specify calibration: K, T, or E. K = CHROMEGA®-ALOMEGA®,

*

T = Copper-Constantan, E = CHROMEGA®-Constantan
For lead wire lengths over 1.5 m (60") at an additional cost/300 mm
(12") and modify model number.

Ordering Example: HYP1-30-1/2-T-G-60-SMPW-M,
thermocouple probe.

108 REF

31.8

(1.25)

28.6

(1.125)

38

(1.5)

6.4

(0.25) OD

1.65

(0.065) OD

31.8

(1.25)

36

(1.19)

38

(1.5)

6.4

(0.25) OD

1.65

(0.065) OD

27

(1.06)

(1.06)

ø6.4 (0.250)

(4.25)

27

38

(1.50)

ø0.81 (0.032)

Dimensions:
mm (inch)

Thermocouple Probe Model HYP2 and HYP5

The HYP2 and HYP5 Probes have Natural Science, Industrial
and Food Processing uses. These assemblies comes complete
with a Type T (Copper-Constantan) element, 1.2 m (4') PFA
insulated lead wires

†

, and uses a standard (21 gage) hypodermic
needle 38 mm (1.5") long. 1.2 m (4') lead wire is standard.
Standard size male connector terminates the lead wire.

Model No. ANSI Color Code

HYP2-21-1-1/2-(*)-G-48-OSTW-M
HYP2-21-1-1/2-(*)-G-48-SMPW-M
HYP5-21-1-1/2-(*)-G-SMPW

† HYP5 does not have lead wires

Specify calibration: J, K, T, or E.

*

J = Iron-Constantan T = Copper-Constantan

*

K = CHROMEGA®-ALOMEGA® E = CHROMEGA®-Constantan
Easy grip handle, add “EGH” suffix, for additional cost.

For lead wire lengths over 1.2 m (48") at an additional cost/300 mm (12") and modify model number.
Ordering Example: HYP2-21-1-1/2-T-G-48-OSTW-M, Type T grounded junction probes.

HYP2

OSTW connector
included on HYP2.

Thermocouple Probe Model HYP3

OMEGA® Industrial Hypodermic Probe uses a 16 gage
x 38 mm (1.5") long needle and may contain J, K, T, E
calibrations; they may have a grounded or ungrounded
junction, and come with stainless steel overbraided extension
wire. The stainless steel overbraiding adds flexibility and
extends the probe life. These probes are not autoclavable.
They are designed for heavy-duty service. 1.2 m (4') lead
wire is standard. Maximum tip temperature is 200°C (400°F).

Model No. ANSI Color Code

HYP3-16-1-1/2-(*)-(**)-48-RP

When ordering, specify calibration and whether grounded or
ungrounded junction is desired

Specify calibration: J, K, T, or E. J = Iron-Constantan

*

T = Copper-Constantan K = CHROMEGA®-ALOMEGA®
E = CHROMEGA®-Constantan

Specify measuring junction style: U or G

**

Also Available: R and S (platinum)—consult factory for price and
delivery.
Easy Grip Handle, add “EGH” suffix, for additional cost
For lead wire lengths over 1.2 m (48") at an additional cost/300 mm
(12”) and modify model number.
To add an SMPW male connector add suffix “-SMPW-M” to model
number for additional cost.

Shown smaller

than actual size.

Now Available!

M8/M12

CONNECTORS

For a male straight M8 plug add “M8-S-M” to the model number for
additional cost, for a male straight M12 plug add “M12-S-M” to the
model number for additional cost.
For a male right-angled M8 plug add “M8-R-M” to the model
number for additional cost, for a male right-angled M12 plug add

“M12-S-M” to the model number for additional cost.
Ordering Example: HYP3-16-1-1/2-K-G-48-SMPW-M, Type K

grounded junction probe with 1.2 m (48") leads.

Custom-Designs

Available in Length,

Dimension and Insulation!

Consult our Custom-Design

Department for Details.

HYP5 with
SMPW
connector.

Shown smaller

than actual size.

These probes should not be
used for human implantation.

Add an SMPW connector,

see ordering example.

These probes should not be
used for human implantation.

Dimensions:
mm (inch)

A

RTD Probe Model HYP4

The RTD Hypodermic Probes are offered for Industrial,
Natural Sciences and Food Processing use. These probes
contain a 100 Ω platinum RTD (a = 0.00385) within a 16 gage
x 38 mm (1.5") hypodermic needle, and come with 1.2 m (4')
PFA insulated lead wire.

Model No. ANSI Color Code

HYP4-16-1-1/2-100-EU-48-RP

All probes were designed for industrial, laboratory, manufacturing and
chemical research only. They are not intended for medicinal use, or
on humans. OMEGA assumes no responsibility if these products are
used for medicinal purposes, or on humans, or are misused in any way.

For lead wire lengths over 1.2 m (48") at an additional cost/300 mm
(12") and modify model number.

For a male straight M8 plug add “M8-S-M” to the model number for
additional cost, for a male straight M12 plug add “M12-S-M” to the
model number for additional cost.

For a male right-angled M8 plug add “M8-R-M” to the model number
for additional cost, for a male right-angled M12 plug add “M12-S-M” to
the model number for additional cost.

To add an MPT-U male connector add suffix “-MTP-M” for additional cost.

Shown smaller than actual size.

Add an MTP connector,

see ordering example.

Now Available!

M8/M12

CONNECTORS

Ordering Example: HYP4-16-1-1/2-100-EU-48-MTP-M, RTD hypodermic
probe with 1.2 m (48" leads) and MPT-U male connector.

A-94

These probes should not be
used for human implantation.

Dimensions:
mm (inch)