LONG RANGE
WIRELESS SYSTEM
Monitor and Control 4 Switches or Valves
Up to 8 Miles Away
HPWS Series
Starts at
$
1950
8 Mile Range
Monitor Up to 4 Switches
at One Time
Easy Setup and Installation
Rugged, Weatherproof
NEMA 4X (IP66) Enclosure
Perfect for Water Treatment
Facilities and Pipelines
The OMEGA®HPWS Series long
range wireless system allows users
to remotely monitor the status of up
to four discrete switches such as
level, flow, or other contact
switches up to 8 miles away.
Ideal applications for the HPWS
include supervising the fluid level in
a tank, operation of a distant pump
from a control station, or monitoring
the status of a pipeline. The HPWS
Series is also useful for controlling
switches in hard to access locations.
One HPWS-REC receiver can
monitor a total of 4 switch
transmissions from 1 to 4 unique
HPWS-TX transmitters.
HPWS-TX, transmitter
model, $1950, shown
smaller than actual size.
OM-AMPOLEMNT10
optional pole mount
kits are 14 gauge
(0.075") galvannealed
steel with 48" SS pole
clamp and includes
#10-32 SS screws,
washers and lock
nuts, $48.50.
K-1
The included 0.9 m (3') antenna
provides an 8 mile, outdoor
line-of-sight range. In addition, the
elevated barrier strip allows for
easy wiring to user’s switches.
The transmitter’s included backup
battery ensures transmissions will
continue even when there’s a short
power loss at the monitoring
location. The HPWS-REC also
allows for an optional battery
backup, which can provide up to
24 hours of normal use during a
power loss. The 12V SLA battery
is designed to recharge once AC
power is restored.
The HPWS Series transmitters and
receivers employ watertight cable
glands allowing the fiberglass
enclosure to be rated to NEMA 4X
(IP66), ensuring continued
performance when mounted outdoors.
K
Typical
Application
8 miles
SPECIFICATIONS
General
Enclosure: Fiberglass reinforced
polyester formulation
Enclosure Dimensions (No Antenna):
342.9 H x 292.1 W x 190.5 mm D
(13.5 x 11.5 x 7.5")
Tank
level
switch
Weight: 5.57 kg (12.28 lb)
Closing Mechanism: 4 Screws
Enclosure Rating: NEMA 4X (IP66)
RF Connector: UHF
Ready to Install and Operate!
Radio
Frequency: 27.255 MHz
Antenna Impedance: 50 Ω
Address Code: 65,536 possible codes
Electrical
Power: AC
Power Requirement: 115 Vac, 60 Hz
or 230 Vac, 50 Hz
DC Battery Backup: Standard on
transmitter, optional on receiver
Transmitter
and receiver
are user
programmable
via convenient
dip switches.
Battery Backup (HPWS-TX and
HPWS-REC-BATT only)
Internal Battery Backup:
12V, 5.0 amp-hour
Battery Life: 5000 transmissions
between charging (over 24 hours of
typical use—typical use being 10
transmissions an hour)
Barrier strip
included for
easy wiring.
Battery Operating Temperature:
-35 to 60°C (-31 to 140°F) discharging,
-20 to 50°C (-4 to 122°F) charging
Transmitter
Inputs: 4 discrete inputs
Transmit Power: 10 watt
Transmit Time: Pulse (500 msec or less)
Transmitted Data: 4 discrete inputs,
and battery and signal status
Transmit Current: 2A, momentary on
transmit (500 msec or less)
Average Continuous Load: 15µA
To Order
Model No.
HPWS-TX
HPWS-REC
(Specify Model Number)
Price Description
$1950 4-channel wireless switch transmitter with battery backup
1950 4-channel wireless receiver
HPWS-REC-BATT 2050 4-channel wireless receiver
Accessories
Model No. Price Description
OM-AMPOLEMNT10 $48.50 Pole mount kit for 254 mm (10") wide fiberglass enclosures
HPWS-BATT 39 Replacement backup battery 12V, 5 Amp-hour for HPWS series
HPWS-TX comes complete with long range, 4-channel wireless transmitter with battery backup, operator’s manual, 5.5 m (18') of RG-58 cable,
and 0.9 m (3') antenna.
HPWS-REC comes complete with long range, 4-channel AC-powered wireless receiver, operator’s manual, 5.5 m (18') of RG-58 cable, and
0.9 m (3') antenna.
HPWS-REC-BATT comes complete with long range, 4-channel wireless receiver with battery backup, operator’s manual, 5.5 m (18') of
RG-58 cable, and 0.9 m (3') antenna.
Ordering Examples: HPWS-TX 4-channel wireless switch transmitter, and HPWS-REC 4-channel wireless receiver, $1950 + 1950 = $3900.
HPWS-TX 4-channel wireless switch transmitter, and OM-AMPOLEMNT10 pole-mount kit, $1950 + 48.50 = $1998.50.
Receiver
Received Data: 4 discrete inputs, low
battery, signal status
Receiver Current: 190 mA with all
outputs active
Average Continuous Load: 30 mA
Transmitter
with battery
K-2
Receiver
Power supply
automatically
switches to battery
backup during a
power failure.
WARNING: The FCC allows unlicensed,
high-powered transmissions near the operating
frequency of the HPWS. The HPWS Series is
not intended to be used in applications where
loss or interference of radio signals would be
dangerous or cause a critical situation. In
addition, the HPWS is not intended for use on
humans or in nuclear facilities.
AVAILABLE FOR FAST DELIVERY!
backup
Pump
motor
Battery backup
provides
reliability in
the event of
power loss.