Omega Products HPS-ICSS-18E-12-SMP-M User Manual

A-123

Tip designed for easy penetration
into soft and semi-frozen objects.
Made from rugged 304 stainless
steel. Tip rated to 900°C (1650°F).

Penetration Probe

HPS-NP-[*]-316G-12

$

45

4.5 mm (3⁄16") OD

Fast Response
Probe

HPS-RT-[*]-18G-12

Special small diameter (1⁄16") tip
designed for fast response. Made
from 304 stainless steel. Tip rated
to 900°C (1600°F).

$

50

Reduced to

1.5 mm (1⁄16") OD

Flexible Tip
Surface Probe

HPS-FSP-[*]-14E-12

$

75

6.0 mm (1⁄4") OD

* Rated temperature is dependent on thermocouple type,
sheath diameter and environment.

Air Probe

HPS-AP-[*]-316E-12

Radiant energy shield with
fine-gage wire thermocouple
and 304 stainless steel sheath.
Thermocouple tip is exposed to air
flow for fast measurements, and the
constant diameter design facilitates
easy insertion into duct work,
grilles and air vents. Tip rated
to 870°C (1650°F)

$

85

Rugged!
High Impact
Plastic

Made from the same material
as professional football helmets,
these rugged probe handles
have endurance designed in to
provide long life.

Custom Assemblies
Available

Thermocouple probes with integral
high impact plastic handles, with
300 mm (12") retractable cord with
stripped leads (other terminations
are available). Handles are rated
to 70°C (160°F).

Probes shown are available in
RTD, J, K, T and E calibrations.
Other sheath and lead lengths are
available. Consult Sales
Department for details.

70°C (160°F)
Handle Rating

*Insert thermocouple Type J, K, T, E or N

4.5 mm (3⁄16") OD

Completely assembled with 0.3 m (1') retractable cable
(stretches to 1.5 m [5']) and SMPW connector.

Integral Handle Probes

with Custom Measurement Tips

Flexible tip which conforms to most
surfaces for fast, repeatable,
accurate measurements. Made from
RTV silicone rubber for good
thermal contact. Tip rated to 260°C
(500°F). Warning: Subjecting sensor
tip to temperatures above 316°C
(600°F) will result in damage to tip.

ALL MODELS AVAILABLE FOR FAST DELIVERY!

For RTDs
please see
page C-27

ANSI
color
code

shown

See Section I

To order
IEC color
code see
page A-9

A-124

For probe lengths over the maximum listed,
consult quotations for special heavy duty
construction probes.

Probe Dia. Max. Length

mm (in) mm (in)

1.5 (

1

⁄16") 900 (36)

3.0 (1⁄8") 750 (30)

4.5 (3⁄16") 600 (24)

6.0 (1⁄4") 450 (18)

To Order

(Specify Model Number)

Thermocouple Sheath Grounded Ungrounded Exposed Price/Add'l

Alloy Dia. Junction Price Junction Price Junction Price

300 mm (ft)

IRON- 1.5 (1⁄16") HPS-ICIN-116G-12-SMP-M $37 HPS-ICIN-116U-12-SMP-M $39 HPS-ICIN-116E-12-SMP-M $37 $1.55

CONSTANTAN 3.0 (1⁄8") HPS-ICIN-18G-12-SMP-M 37 HPS-ICIN-18U-12-SMP-M 39 HPS-ICIN-18E-12-SMP-M 37 3.15

Inconel 4.5 (3⁄16") HPS-ICIN-316G-12-SMP-M 38 HPS-ICIN-316U-12-SMP-M 40 HPS-ICIN-316E-12-SMP-M 38 4.35
Sheath 6.0 (1⁄4") HPS-ICIN-14G-12-SMP-M 41 HPS-ICIN-14U-12-SMP-M 43 HPS-ICIN-14E-12-SMP-M 41 7.50

IRON- 1.5 (

1

⁄16") HPS-ICSS-116G-12-SMP-M $37 HPS-ICSS-116U-12-SMP-M $39 HPS-ICSS-116E-12-SMP-M $37 $1.55

CONSTANTAN 3.0 (1⁄8") HPS-ICSS-18G-12-SMP-M 37 HPS-ICSS-18U-12-SMP-M 39 HPS-ICSS-1 8E-12-SMP-M 37 1.85

304SS 4.5 (3⁄16") HPS-ICSS-316G-12-SMP-M 38 HPS-ICSS-316U-12-SMP-M 40 HPS-ICSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-ICSS-14G-12-SMP-M 41 HPS-ICSS-14U-12-SMP-M 43 HPS-ICSS-14E-12-SMP-M 41 5.00

CHROMEGA

®

- 1.5 (1⁄16") HPS-CAIN-116G-12-SMP-M $37 HPS-CAIN-116U-12-SMP-M $39 HPS-CAIN-116E-12-SMP-M $37 $1.55

ALOMEGA

®

3.0 (1⁄8") HPS-CAIN-18G-12-SMP-M 37 HPS-CAIN-18U-12-SMP-M 39 HPS-CAIN-18E-12-SMP-M 37 3.15
Inconel 4.5 (3⁄16") HPS-CAIN-316G-12-SMP-M 38 HPS-CAIN-316U-12-SMP-M 40 HPS-CAIN-316E-12-SMP-M 38 4.35
Sheath 6.0 (1⁄4") HPS-CAIN-14G-12-SMP-M 41 HPS-CAIN-14U-12-SMP-M 43 HPS-CAIN-14E-12-SMP-M 41 7.50

CHROMEGA

®

- 1.5 (1⁄16") HPS-CASS-116G-12-SMP-M $37 HPS-CASS-116U-12-SMP-M $39 HPS-CASS-116E-12-SMP-M $37 $1.55

ALOMEGA

®

3.0 (1⁄8") HPS-CASS-18G-12-SMP-M 37 HPS-CASS-18U-12-SMP-M 39 HPS-CASS-18E-12-SMP-M 37 1.85
304SS 4.5 (3⁄16") HPS-CASS-316G-12-SMP-M 38 HPS-CASS-316U-12-SMP-M 40 HPS-CASS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CASS-14G-12-SMP-M 41 HPS-CASS-14U-12-SMP-M 43 HPS-CASS-14E-12-SMP-M 41 5.00

CHROMEGA

®

- 1.5 (1⁄16") HPS-CXIN-116G-12-SMP-M $37 HPS-CXIN-116U-12-SMP-M $39 HPS-CXIN-116E-12-SMP-M $37 $1.85

CONSTANTAN 3.0 (1⁄8") HPS-CXIN-18G-12-SMP-M 37 HPS-CXIN-18U-12-SMP-M 39 HPS-CXIN-18E-12-SMP-M 37 3.75

Inconel 4.5 (3⁄16") HPS-CXIN-316G-12-SMP-M 38 HPS-CXIN-316U-12-SMP-M 40 HPS-CXIN-316E-12-SMP-M 38 5.00
Sheath 6.0 (1⁄4") HPS-CXIN-14G-12-SMP-M 45 HPS-CXIN-14U-12-SMP-M 47 HPS-CXIN-14E-12-SMP-M 45 7.50

CHROMEGA

®

- 1.5 (1⁄16") HPS-CXSS-116G-12-SMP-M $37 HPS-CXSS-116U-12-SMP-M $39 HPS-CXSS-116E-12-SMP-M $37 $1.55

CONSTANTAN 3.0 (1⁄8") HPS-CXSS-18G-12-SMP-M 37 HPS-CXSS-18U-12-SMP-M 39 HPS-CXSS-18E-12-SMP-M 37 2.50

304SS 4.5 (3⁄16") HPS-CXSS-316G-12-SMP-M 38 HPS-CXSS-316U-12-SMP-M 40 HPS-CXSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CXSS-14G-12-SMP-M 41 HPS-CXSS-14U-12-SMP-M 43 HPS-CXSS-14E-12-SMP-M 41 5.00

COPPER- 1.5 (

1

⁄16") HPS-CPIN-116G-12-SMP-M $37 HPS-CPIN-116U-12-SMP-M $39 HPS-CPIN-116E-12-SMP-M $37 $1.85

CONSTANTAN 3.0 (1⁄8") HPS-CPIN-18G-12-SMP-M 37 HPS-CPIN-18U-12-SMP-M 39 HPS-CPIN-18E-12-SMP-M 37 3.75

Inconel 4.5 (3⁄16") HPS-CPIN-316G-12-SMP-M 38 HPS-CPIN-316U-12-SMP-M 40 HPS-CPIN-316E-12-SMP-M 38 5.00
Sheath 6.0 (1⁄4") HPS-CPIN-14G-12-SMP-M 45 HPS-CPIN-14U-12-SMP-M 47 HPS-CPIN-14E-12-SMP-M 45 7.50

COPPER- 1.5 (

1

⁄16") HPS-CPSS-116G-12-SMP-M $37 HPS-CPSS-116U-12-SMP-M $39 HPS-CPSS-116E-12-SMP-M $37 $1.55

CONSTANTAN 3.0 (1⁄8") HPS-CPSS-18G-12-SMP-M 37 HPS-CPSS-18U-12-SMP-M 39 HPS-CPSS-18E-12-SMP-M 37 2.50

304SS 4.5 (3⁄16") HPS-CPSS-316G-12-SMP-M 38 HPS-CPSS-316U-12-SMP-M 40 HPS-CPSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CPSS-14G-12-SMP-M 41 HPS-CPSS-14U-12-SMP-M 43 HPS-CPSS-14E-12-SMP-M 41 5.00

†

Other lengths available, consult Sales department. For standard size “OSTW” connector add suffix “-OSTW” to model number and add $5 to price.
Ordering Example: HPS-CASS-14G-12-SMP-M, Type K probe, 1⁄4" diameter, 304SS sheath, SMP connector, grounded junction with
miniature connector, $41.

Integral Handle Probes

General Purpose Design

Note: Supplied with HDX

aluminum handle for lengths over 600 mm
(24"). Consult Sales for pricing.

Cable termination with standard size
connector available, see ordering example.

⻬ Heavy Duty
⻬ 300 mm (12") Probe Length Standard

†

⻬ 0.3 m (1') Color-Coded Retractable

Cable Stretches to 1.5 m (5')

⻬ Handle Rated to 70°C (160°F)
⻬ Stainless Steel or Inconel Sheath
⻬ SMP Molded Miniature

Male Connector
on Retractable
Cable for Fast Hook-up to
Instrumentation

⻬ PFA Coating Available
⻬ Inconel N

Discount Schedule

A

MOST POPULAR

MODELS HIGHLIGHTED!

1-10 Units . . . . . . . . . . . . . . . . . . .Net

11-24 Unit . . . . . . . . . . . . . . . . . .10%

25-49 Units . . . . . . . . . . . . . . . . .20%

50 and up . . . . . . . . . .Consult Sales

Available as

See page A-43 to A-48.

See Section I