Omega Products HPS-AP-E-316E-12 User Manual

Integral Handle Probes

with Custom Measurement Tips

Completely assembled with 0.3 m (1') retractable cable (stretches
to 1.5 m [5']) and SMPW connector, shown smaller than actual size.

Rated temperature is dependent on thermocouple type,

*

sheath diameter and environment.

AVAILABLE FOR FAST DELIVERY!

4.5 mm (3⁄16") OD

Reduced to

1.5 mm (1⁄16") OD

6.0 mm (1⁄4") OD

4.5 mm (3⁄16") OD

$

45

$

50

$

75

$

85

Tip designed for easy penetration
into soft and semi-frozen objects.
Made from rugged 304 stainless
steel. Tip rated to 900°C (1650°F).

Special small diameter (1⁄16") tip
designed for fast response. Made
from 304 stainless steel. Tip rated
to 900°C (1600°F).

Flexible tip which conforms to most
surfaces for fast, repeatable,
accurate measurements. Made from
RTV silicone rubber for good
thermal contact. Tip rated to 260°C
(500°F). Warning: Subjecting sensor
tip to temperatures above 316°C
(600°F) will result in damage to tip.

Radiant energy shield with
fine-gage wire thermocouple
and 304 stainless steel sheath.
Thermocouple tip is exposed to air
flow for fast measurements, and the
constant diameter design facilitates
easy insertion into duct work,
grilles and air vents. Tip rated
to 870°C (1650°F)

Penetration Probe

HPS-NP-[*]-316G-12

Fast Response
Probe

HPS-RT-[*]-18G-12

Flexible Tip
Surface Probe

HPS-FSP-[*]-14E-12

Air Probe

HPS-AP-[*]-316E-12

Insert thermocouple Type J, K, T, E or N

*

Rugged!
High Impact
Plastic

For RTDs
please see
page C-55.

Made from the same material
as professional football
helmets, these rugged probe
handles have endurance
designed in to provide long life.

70°C (160°F)
handle rating.

A-119

Custom Assemblies
Available

Thermocouple probes with integral
high impact plastic handles, with
300 mm (12") retractable cord with
stripped leads (other terminations
are available). Handles are rated
to 70°C (160°F).

Probes shown are available in
RTD, J, K, T and E calibrations.
Other sheath and lead lengths
are available. Consult Sales
for details.

Integral Handle Probes

General Purpose Design

A

 Heavy Duty
 300 mm (12") Probe Length Standard

†

 0.3 m (1') Color-Coded Retractable

Cable Stretches to 1.5 m (5')

 Handle Rated to 70°C (160°F)
 Stainless Steel or Inconel Sheath
 SMP Molded Miniature

Male Connector
on Retractable
Cable for Fast Hook-up to
Instrumentation

 PFA Coating

Available

For probe lengths over the maximum listed,
consult quotations for special heavy duty
construction probes.

Probe Dia. Max Length

mm (in) mm (in)

1

1.5 (

⁄16") 900 (36)

3.0 (1⁄8") 750 (30)

4.5 (3⁄16") 600 (24)

6.0 (1⁄4") 450 (18)

Discount Schedule

1-10 Units . . . . . . . . . . . . . . . . . . .Net

11-24 Unit . . . . . . . . . . . . . . . . . .10%

25-49 Units . . . . . . . . . . . . . . . . .20%

50 and up . . . . . . . . . . .Consult Sales

Sensors and matching
calibration handles.

Note: Supplied with HDX
aluminum handle for lengths over 600 mm
(24"). Consult Sales for pricing.

Cable termination with standard size
connector available, see ordering example.

MOST POPULAR

MODELS HIGHLIGHTED!

To Order (Specify Model Number)

Thermocouple Sheath Grounded Ungrounded Exposed Price/Add'l

Alloy Dia. Junction Price Junction Price Junction Price

IRON- 1.5 (1⁄16") HPS-ICIN-116G-12-SMP-M $37 HPS-ICIN-116U-12-SMP-M $39 HPS-ICIN-116E-12-SMP-M $37 $1.55

CONSTANTAN 3.0 (1⁄8") HPS-ICIN-18G-12-SMP-M 37 HPS-ICIN-18U-12-SMP-M 39 HPS-ICIN-18E-12-SMP-M 37 3.15

Inconel 4.5 (3⁄16") HPS-ICIN-316G-12-SMP-M 38 HPS-ICIN-316U-12-SMP-M 40 HPS-ICIN-316E-12-SMP-M 38 4.35
Sheath 6.0 (1⁄4") HPS-ICIN-14G-12-SMP-M 41 HPS-ICIN-14U-12-SMP-M 43 HPS-ICIN-14E-12-SMP-M 41 7.50

IRON- 1.5 (

CONSTANTAN 3.0 (1⁄8") HPS-ICSS-18G-12-SMP-M 37 HPS-ICSS-18U-12-SMP-M 39 HPS-ICSS-1 8E-12-SMP-M 37 1.85

304SS 4.5 (3⁄16") HPS-ICSS-316G-12-SMP-M 38 HPS-ICSS-316U-12-SMP-M 40 HPS-ICSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-ICSS-14G-12-SMP-M 41 HPS-ICSS-14U-12-SMP-M 43 HPS-ICSS-14E-12-SMP-M 41 5.00

CHROMEGA

ALOMEGA

CHROMEGA

ALOMEGA

CHROMEGA
CONSTANTAN 3.0 (1⁄8") HPS-CXIN-18G-12-SMP-M 37 HPS-CXIN-18U-12-SMP-M 39 HPS-CXIN-18E-12-SMP-M 37 3.75

CHROMEGA
CONSTANTAN 3.0 (1⁄8") HPS-CXSS-18G-12-SMP-M 37 HPS-CXSS-18U-12-SMP-M 39 HPS-CXSS-18E-12-SMP-M 37 2.50

COPPER- 1.5 (

CONSTANTAN 3.0 (1⁄8") HPS-CPIN-18G-12-SMP-M 37 HPS-CPIN-18U-12-SMP-M 39 HPS-CPIN-18E-12-SMP-M 37 3.75

COPPER- 1.5 (

CONSTANTAN 3.0 (1⁄8") HPS-CPSS-18G-12-SMP-M 37 HPS-CPSS-18U-12-SMP-M 39 HPS-CPSS-18E-12-SMP-M 37 2.50

† Other lengths available, consult Sales department. For standard size “OSTW” connector add suffix “-OSTW” to model number and add $5 to price.
Ordering Example: HPS-CASS-14G-12-SMP-M, Type K probe, 1⁄4" diameter, 304SS sheath, SMP connector, grounded junction with

miniature connector, $41.

®

- 1.5 (1⁄16") HPS-CAIN-116G-12-SMP-M $37 HPS-CAIN-116U-12-SMP-M $39 HPS-CAIN-116E-12-SMP-M $37 $1.55

®

Inconel 4.5 (3⁄16") HPS-CAIN-316G-12-SMP-M 38 HPS-CAIN-316U-12-SMP-M 40 HPS-CAIN-316E-12-SMP-M 38 4.35
Sheath 6.0 (1⁄4") HPS-CAIN-14G-12-SMP-M 41 HPS-CAIN-14U-12-SMP-M 43 HPS-CAIN-14E-12-SMP-M 41 7.50

®

- 1.5 (1⁄16") HPS-CASS-116G-12-SMP-M $37 HPS-CASS-116U-12-SMP-M $39 HPS-CASS-116E-12-SMP-M $37 $1.55

®

304SS 4.5 (3⁄16") HPS-CASS-316G-12-SMP-M 38 HPS-CASS-316U-12-SMP-M 40 HPS-CASS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CASS-14G-12-SMP-M 41 HPS-CASS-14U-12-SMP-M 43 HPS-CASS-14E-12-SMP-M 41 5.00

®

- 1.5 (1⁄16") HPS-CXIN-116G-12-SMP-M $37 HPS-CXIN-116U-12-SMP-M $39 HPS-CXIN-116E-12-SMP-M $37 $1.85

Inconel 4.5 (3⁄16") HPS-CXIN-316G-12-SMP-M 38 HPS-CXIN-316U-12-SMP-M 40 HPS-CXIN-316E-12-SMP-M 38 5.00
Sheath 6.0 (1⁄4") HPS-CXIN-14G-12-SMP-M 45 HPS-CXIN-14U-12-SMP-M 47 HPS-CXIN-14E-12-SMP-M 45 7.50

®

- 1.5 (1⁄16") HPS-CXSS-116G-12-SMP-M $37 HPS-CXSS-116U-12-SMP-M $39 HPS-CXSS-116E-12-SMP-M $37 $1.55

304SS 4.5 (3⁄16") HPS-CXSS-316G-12-SMP-M 38 HPS-CXSS-316U-12-SMP-M 40 HPS-CXSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CXSS-14G-12-SMP-M 41 HPS-CXSS-14U-12-SMP-M 43 HPS-CXSS-14E-12-SMP-M 41 5.00

Inconel 4.5 (3⁄16") HPS-CPIN-316G-12-SMP-M 38 HPS-CPIN-316U-12-SMP-M 40 HPS-CPIN-316E-12-SMP-M 38 5.00
Sheath 6.0 (1⁄4") HPS-CPIN-14G-12-SMP-M 45 HPS-CPIN-14U-12-SMP-M 47 HPS-CPIN-14E-12-SMP-M 45 7.50

304SS 4.5 (3⁄16") HPS-CPSS-316G-12-SMP-M 38 HPS-CPSS-316U-12-SMP-M 40 HPS-CPSS-316E-12-SMP-M 38 3.15
Sheath 6.0 (1⁄4") HPS-CPSS-14G-12-SMP-M 41 HPS-CPSS-14U-12-SMP-M 43 HPS-CPSS-14E-12-SMP-M 41 5.00

1

⁄16") HPS-ICSS-116G-12-SMP-M $37 HPS-ICSS-116U-12-SMP-M $39 HPS-ICSS-116E-12-SMP-M $37 $1.55

3.0 (1⁄8") HPS-CAIN-18G-12-SMP-M 37 HPS-CAIN-18U-12-SMP-M 39 HPS-CAIN-18E-12-SMP-M 37 3.15

3.0 (1⁄8") HPS-CASS-18G-12-SMP-M 37 HPS-CASS-18U-12-SMP-M 39 HPS-CASS-18E-12-SMP-M 37 1.85

1

⁄16") HPS-CPIN-116G-12-SMP-M $37 HPS-CPIN-116U-12-SMP-M $39 HPS-CPIN-116E-12-SMP-M $37 $1.85

1

⁄16") HPS-CPSS-116G-12-SMP-M $37 HPS-CPSS-116U-12-SMP-M $39 HPS-CPSS-116E-12-SMP-M $37 $1.55

A-120

300 mm (ft)