![](/html/2b/2bb0/2bb002c108db84f3a5577d3f3ec25a25f402a26ae86bb26dfd18fdb75e850a95/bg1.png)
HPP-100 and HPP-VAC
Handheld Pumps
INSTRUCTION
SHEET
M4672/0508
Shop online at: omega.com e-mail: info@omega.com
For latest product manuals: omegamanual.info
Omega’s HPP-100 low pressure and HPP-VAC vacuum model pneumatic hand pumps are the
most dependable and rugged pump for applications up to 100 psi or 28.8" Hg Vacuum. The Delrin and
anodized aluminum construction prevents body heat transfer, resulting in drift-free, accurate readings .
The pump is equipped with oversized check valves in order to provide smooth and controlled operation.
Dual O-Rings on all pistons ensure the pump to be leak-free. The unit includes a 2 foot long hose, 1/8
female NPT gauge fitting, and 1/8 NPT pipe plug. An optional hose kit is available so that a tee is not
required when connecting a sensor and a calibrator. This pump is ideal for checking calibration of
pressure or vacuum gauges, switches, or transmitters.
SPECIFICATIONS
Output Range:
Process Connection:
Materials:
Pressure Limit: 150 psig.
Temperature Limit: Not to exceed 150°F.
Displaced Volume: Approximately 4 in .
Dimensions: 229 mm long x 38 mm diameter (9" x 1.5").
Weight: 680 g (1.5 lbs).
HPP-100: 0 to 100 psi, HPP-VAC: 0 to -28.8 In Hg.
Two 1/8" female NPT parts, one with a removable plug.
Delrin and anodized aluminum.
OPERATION
Pressure Venting Valve Cap:
The small, knurled pressure relief knob relieves pressure from the pump. Turning the knob
counterclockwise allows the system to vent in increments as small as 0.01" of H2O. Do not over tighten
the valve. See Figure
CAUTION
INSURE ALL GAUGES AND INSTRUMENTS TO BE CALIBRATED ARE DISCONNECTED FROM PROCESS
PRESSURES BEFORE CONNECTING PUMP. THE MAXIMUM PUMP DESIGN PRESSURE IS 150 PSIG. CONNECTION
TO A PRESSURE SOURCE GREATER THAN 150 PSIG COULD CAUSE SERIOUS INJURY.
![](/html/2b/2bb0/2bb002c108db84f3a5577d3f3ec25a25f402a26ae86bb26dfd18fdb75e850a95/bg2.png)
OMEGAnet®Online Service Internet e-mail
omega.com info@omega.com
Servicing North America:
U.S.A.:
ISO 9001 Certified Stamford, CT 06907-0047
Canada:
One Omega Drive, Box 4047
Tel: (203) 359-1660
FAX: (203) 359-7700
e-mail: info@omega.com
976 Bergar
Laval (Quebec) H7L 5A1, Canad
Tel: (514) 856-6928
FAX: (514) 856-6886
e-mail: info@omega.c
a
a
For immediate technical or application assistance:
U.S.A. and Canada:
Mexico:
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its
products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
WARNING:
These products are not designed for use in, and should not be used for, human applications.
Sales Service: 1-800-826-6342/1-800-TC-OMEGA
Customer Service: 1-800-622-2378/1-800-622-BEST
Engineering Service: 1-800-872-9436/1-800-USA-WHEN
En Espan˜ol: (001) 203-359-7803
FAX: (001) 203-359-7807
e-mail:espanol@omega.com
info@omega.com.m
x
®
®
®
Czech Republic:
Germany/Austria:
United Kingdom:
ISO 9002 Certified Northbank, Irlam, Manchester
Servicing Europe:
Frystatska 184, 733 01 Karviná, Czech Republic
Tel: +420 (0)59 6311899
FAX: +420 (0)59 631111
Toll Free: 0800-1-66342
e-mail: info@omegashop.cz
Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: +49 (0)7056 9398FAX: +49 (0)7056 9398-29
Toll Free in Germany: 0800 639 7678
e-mail: info@omega.d
One Omega Drive, River Bend Technology Centre
M44 5BD United Kingdom
Tel: +44 (0)161 777 6611
FAX: +44 (0)161 777 6622
Toll Free in United Kingdom: 0800-488-488
e-mail: sales@omega.co.uk
4
0
e
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase.
OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and
shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR)
number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced
at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling,
improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows
evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or
vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not
warranted, include but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any
omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided
by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of
defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT
THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total
liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential,
incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in
or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear
installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic
WARRANTY/ DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage
whatsoever arising out of the use of the Product(s) in such a manner.
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO
RETURN REQUESTS / INQUIRIES
OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER
TO AVOID PROCESSIN G DELAYS ). The assigned AR numb er shoul d then be marke d on the o utsid e of th e return package an d on an y
correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.
FOR WARRANT
available BEFORE contacting OMEGA:
1. Purchase Order number under which the product was PURCHASED
2. Model and serial number of the product under warranty, and
3. Repair instructions and/or specific problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and
engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC
© Copyright 2008 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC
Y RETURNS, please have the following information
FOR NON-WARRANTY REPAIRS,
consult OMEGA for current repair charges.
Have the following information available BEFORE contacting OMEGA:
,
1. Purchase Order number to cover the COST of the repair,
2. Model and serial number of the product, an
d
3. Repair instructions and/or specific problems relative to the product.
.
.