Omega Products HPP-100 User Manual

PRECISION HANDHELD PUMPS

FOR PRESSURE AND VACUUM CALIBRATION

HPP Series

U Pneumatic Models for

Vacuum and Pressure to 41 bar (600 psi)

U Hydraulic Model for

0 to 690 bar (0 to 10,000 psi)

U Precision Vernier for

Fine Adjustments

U Designed for High

Reliability and High Performance

HPP-VAC pneumatic

pump, for ordering information see next page, shown smaller

then actual size.

PRESSURE INSTRUMENTS

OMEGA’s HPP Series precision calibration pumps are designed to provide long term reliability in harsh environments. Four models are available to cover ranges from vacuum up to 690 bar (10,000 psi). Pumps can be purchased separately or as a kit that includes a carrying case, tubing and fittings.

The HPP-100 and HPP-VAC are economical pumps designed for 0 to 6.9 bar (0 to 100 psi) or 0 to

-0.95 bar (0 to -28 inHg vacuum). Both models feature dual O-rings on all pistons for smooth operation with zero leakage. A “mash proof” schrader valve replaces the needle valve commonly used for the vent.

HPP-600 pneumatic

pump, shown smaller

then actual size

HPP-600

The HPP-600 is a pneumatic pump that can generate both vacuum and pressure. It covers a range from -0.95 bar (28 inHg) vacuum to 41 bar (600 psi) pressure. Dual O-rings, oversized check valves, and a “mash proof” vent valve ensure smooth, trouble free operation.

A-48

HPP-10K

The HPP-10K hydraulic pump can generate pressure from 0 to 690 bar (0 to 10,000 psi). It is compatible with most hydraulic fluids, oils and water. A precision stroke control adjustment allows for fast priming or shorter stroke for easier pumping at high pressure. It features a shatter proof reservoir, triple filtration system and a built-in pressure relief valve.

PRECISION HANDHELD PUMPS

SPECIFICATIONS (HPP-100/HPP-VAC)

Range:

HPP-100: 0 to 6.9 bar (0 to 100 psi) HPP-VAC: 0 to -0.95 bar (0 to -28 inHg vacuum)

Connections: (2) Size: 229 L x 38 mm Dia (9 x 1.5") Weight: 680 g (1.5 lb)

SPECIFICATIONS (HPP-600)

Range: -0.95 to 41 bar

(-28 inHg to 600 psi) Connections: Top

side

⁄8 BSP female (NPT adaptors

included)

Weight: 907 g (2 lb)

SPECIFICATIONS (HPP-10K)

Range: 0 to 690 bar (0 to 10,000 psi) Connections: Top

side 1⁄4 BSP female (1⁄4 NPT adaptors included)

Recommended Fluids: Distilled water or mineral based hydraulic oil

Wetted Parts: Stainless steel, polyurethane, PTFE and nitrile

Weight: 1.4 kg (3 lb)

⁄8 NPT female ports

⁄4 BSP female,

⁄8 BSP female,

HPP-10K-KIT

hydraulic pump kit,

shown smaller

then actual size.

HPP-10K-KIT includes a carrying case, tubing with fittings, and a fluid bottle.

To Order

Visit omega.com/hpp_series for Pricing and Details

PUMPS ONLY MODEL NO. DESCRIPTION

HPP-100 Handheld pneumatic pressure pump, 0 to 6.9 bar (0 to 100 psi)

HPP-VAC Handheld pneumatic vacuum pump, 0 to -0.95 bar (0 to -28 inHg vacuum)

HPP-600 Handheld pneumatic vacuum/pressure pump, -0.95 to 41 bar (-28 inHg to 600 psi) HPP-10K Handheld hydraulic pressure pump, 0 to 690 bar (0 to 10,000 psi)

PUMP KITS (Kits include pump, carrying case, tubing with fittings)

HPP-100-KIT HPP-100 pump, carrying case, HPP-HOSE and 64 mm (2

HPP-VAC-KIT HPP-VAC pump, carrying case, HPP-HOSE and 64 mm (2

⁄

2") gauge

⁄

2") gauge

HPP-600-KIT HPP-600 pump, carrying case and HPP-600-HOSE HPP-10K-KIT HPP-10K pump, carrying case, fluid bottle and HPP-10K-HOSE

ACCESSORIES (Additional Cost)

MODEL NO. DESCRIPTION

HPP-HOSE 0.6 m (2') tubing with HPP-600-HOSE 0.6 m (2') tubing with HPP-10K-HOSE 0.9 m (3') high pressure tubing for HPP-10K with (2)

⁄

8 NPT fittings for HPP-100 or HPP-VAC

⁄

8 NPT fittings for HPP-600

⁄

4 BSPM self sealing test point adaptors

HPP-10K-FW Replacement filters and washers for HPP-10K

Comes complete with operator’s manual. Units with BSP fittings also include NPT adaptors.

Ordering Examples: HPP-100, handheld pressure pump, 0 to 6.9 bar (0 to 100 psi). HPP-600-KIT, vacuum to 41 bar (600 psi) pump kit with carrying case, tubing and fittings.

A-49