Page 1
Cable and Pipe Locator
HHCL10
FLASHLIGHT
U Easy to Identify the
Breaker Associated
with an Energized or
De-Energized AC Outlet
U Transmitter Operates as
an AC/DC Voltmeter with
a Range of 12 to 600V
U Receiver Has Optional
Backlit Display
U Second Transmitter
Available—Makes
Locating Short-Circuits
and Cable Leaks
More Accurate
U Transmitter and
Receiver are Battery
Powered (Included)
The HHCL10 is ideal for pinpointing
the location of electrical cables and
metal, water, or gas pipes behind
walls, above ceilings or under
floors. It can also trace circuits,
detect open- and short-circuits,
find outlets covered by plaster,
identify a circuit’s breaker, and
locate blockages in plastic pipes.
Makes it safe to break through
any wall by revealing and locating
hidden infrastructure up to 2 m
(6.6') behind it, and eliminates the
need to find and read construction
drawings before starting a
job. Transmitter and receiver
communicate on any of eight
channels and display readings
on a big, bright, multi-function
graphic LCD.
Both units also include a flashlight
(for illuminating dark areas) and
a buzzer that can be muted.
Transmitter has three power levels;
receiver has variable sensitivity.
Compatible with one- or two-pole
circuits. Used with a metal rod,
system can locate blockages and
constrictions in plastic pipes.
Specifications
Transmitter
Output Frequency: 125 kHz
Measurement Range/Accuracy:
12 to 600 Vdc or Vac (@60 Hz)/±2.5%
in voltmeter mode
Display: LCD, with function display
and column chart
Overvoltage: 300V
HHCL10 transmitter and
receiver shown smaller
than actual size.
Current Consumption: 31 mA
(minimum), 115 mA (maximum)
Operating Temperature: 0 to 40°C
(32 to 104°F) @ 80% RH
Storage Temperature: -20 to 60°C
(-4 to 140°F) @ 80% RH
Dimensions: 190 x 89 x 42.5 mm
(7.5 x 3.5 x 1.7")
Weight:
Without Battery: 360 g (12.7 oz)
With Battery: 420 g (14.8 oz)
Power Source: 9V battery (included)
Receiver
Tracking Depth (Maximum):
In Cable Locating Mode: 2 m (6.6')
for 1-pole circuit, 0.5 m (1.6') for
2-pole circuit, 2.5 m (8.2') for
single-loop line
In Grid Voltage Identification
Mode: 0.4 m (1.3')
Display: LCD, with function display
and column chart
Current Consumption: 32 mA
(minimum), 89 mA (maximum)
Q-1
FLASHLIGHT
Operating Temperature: 0 to 40°C
(32 to 104°F) @ 80% RH
Storage Temperature: -20 to 60°C
(-4 to 140°F) @ 80% RH
Dimensions: 242 x 78 x 39 mm
(9.5 x 3.1 x 1.5")
Weight:
Without Batteries: 280 g (9.9 oz)
With Battery: 350 g (12.3 oz)
Power Source: 6 “AAA” batteries
(included)
Q
Page 2
Single-Pole Circuit Applications
Locating a cable or line break behind a wall
Locating a cable or line break using
two transmitters
Locating a cold (left) or hot (right) metal water pipe
Locating a socket, switch or junction
box or tracing a line
Locating a blockage in a non-metallic pipe
Double-Pole Circuit Applications
Locating a socket, switch, junction box
or fuse, or tracing a line
Identifying the fuse or circuit breaker
associated with an AC outlet
Locating a short circuit
To Order Visit omega.com/hhcl10 for Pricing and Details
Model No. Description
HHCL10
HHC10-TX
Comes complete with 9V battery, six “AAA” batteries, 1.5 m (5') long red and black test leads with attachable test probes and alligator clips,
soft carrying case, and operator’s manual.
Ordering Example: HHCL10, cable and pipe locator.
Cable and pipe locator, comes with one transmitter and one receiver
Second transmitter to locate short-circuits and cable leaks
Q-2
Loading...