Thermometers
Logging on Selected Models
HH2000 Series
Optional
HH2001KC
shown actual
size, outside
U Speed Read Feature for
Quicker Indicative Readings
U Logging Mode for
Storage, Retrieval and
Output of Readings
U Long Battery Life: Typically
500 Hours
U Wide Temperature
Ranges: -250 to 1750°C
(-418 to 3182°F)
U Accurate
Performance
U For Type K, T, J, N, R,
and S Thermocouples,
Pt100 and Thermistor
Sensors
U Robust Case for
Long Life in Harsh
Environments
U Selectable Auto
Switch-Off
U Automatic Zero
Calibration for
Added Accuracy
U Last Settings Memorized
of protective
rubber boot.
A New Range of Handheld
Contact Thermometers
In response to today’s ever increasing
demand for speed, accuracy and
performance, OMEGA has introduced
the HH2000 Series of handheld digital
thermometers. Models available range
from simple on, off and hold versions
to instruments with advanced
measurement and datalogging functions.
Built To Last
With its ergonomic design, positive
action key pad and magnified display,
the HH2000 Series is a pleasure to
operate. To maximize the instrument’s
useful life, the series features IP65 or
IP67 protection, silicone rubber key pads
with hard plastic coated on/off buttons
and a fully isolated battery compartment.
Representing a new standard in
HHP-2000-RB protective rubber boot
shown smaller than actual size.
This high-impact protective rubber boot
is included to even further enhance
the durability of these instruments.
industrial temperature measurement,
the HH2000 Series provides precise,
stable readings, even in demanding
environments. Furthermore, the
HH2000 Series features a number of
new, innovative functions specifically
designed for today’s industrial
temperature applications.
Readings in Seconds
Rather Than Minutes!
Some measurements take minutes
using standard thermometers due
to poor thermal conductivity in the
item being measured. Often, a highly
L-41
Free Thermocouple
Included!
Thermocouple models include a free 1 m (40")
Type K or appropriate insulated beaded wire
thermocouple with subminiature connector
and wire spool caddy (1 per channel).
Order a Spare! Model No. SC-TT-(*)-30-36
K, J, T, E.
*
accurate answer is not required and
an indicative answer showing that the
reading is above or below a desired
threshold will suffice. The speed read
function will offer an answer in
14 seconds, or, if such a prediction
cannot be made, the instrument
reverts back to a standard accuracy
thermometer automatically.
Data Collection at the
Touch of a Button
Say goodbye to the clipboard and those
hours spent keying data into your PC.
The HH2000 Series’ logging functions,
on demand or at pre-set intervals, enable
readings to be stored, retrieved and
output to a printer or PC, all at the touch
of a button. This permits error-free and
fully traceable records to be maintained.
Performance You
Can Rely On
Over 30 years experience, combined
with extensive customer research, has
given OMEGA a thorough understanding
of industrial applications and has enabled
us to design instruments that meet real
needs. The HH2000 Series is probably
the fastest, most accurate range of
handheld thermometers available; we are
sure there is a model to suit you and your
business requirements.
All Models Feature
• Backlight
Enables reading to be taken
in the dark
• Display Hold
Freezes the reading (for when
watching the probe is more important
than watching the instrument)
• Auto Switch-Off
Auto switch-off after 12 minutes
extends battery life (auto switch-off
does not operate in max/min or logging
modes. This feature can also be turned
off by the user if not required)
• Set-up Retention
The instrument switches on with the
last settings used
Other Selected
Models Feature
• Speed Read>>
Enables an indicative reading
to be shown in 14 seconds, saving
operator time
• A/B, A-B
Enables the operator to select
input channel A, channel B on
the difference between them
• Celsius/Fahrenheit Selection
• Range Lock
Enables the operator to set the
instrumentation to 1° resolution only
• Thermocouple Selection
Enables use with most common
thermocouple types
• Max/Min Recorder
Stores maximum, minimum and
average temperatures. Averaging is
also available on some models within
this mode
• Logging on Demand
Allows readings to be stored as and
when required
• Pre-Set Internal Logging
Allows readings to be stored
automatically at a pre-set interval
Instrument Accuracies
(All ±1 Digit Except HH2001PL)
Models HH2001K, HH2002K,
HH2001KL, HH2001A, HH2002A,
HH2002AL:
0.1% rdg ±0.2°C/0.4°F above
-100°C/-148°F
0.5% rdg ±0.2°C/0.4°F below
-100°C/-148°F
Models HH2001T, HH2001LT:
±0.2°C/0.4°F over range
-20 to 70°C/-4 to 158°F
±0.1% rdg ±0.2°C/0.4°F elsewhere
Models: HH2001P(L) 4-Wire
0.00385/0.00392
±0.2% rdg ±0.1°C/0.2°F over range
-150 to 800°C/-238 to 1472°
Specifications
Resolution: 0.1° from -199.9 to 199.9°
Operating Temperature:
0 to 50°C/32 to 122°F (ambient)
Battery Type: 2 “AA” (included) or
equivalent cells
Battery Life: Typically 500 hours
Low Battery Check: “
appears on display
Display: 12.7 mm (0.5") custom LCD
Sensor Open Circuit:
Indicated by ‘O-C’ on display
Overrange/Underrange:
‘Out’ flashes on display
Cold Junction Compensation: Yes
Environmental Specifications:
IP65 (IP67 optional)
Auto Switch-Off Time: 12 minutes
Dimensions:
155 x 67 x 40 mm (6.1 x 2.6 x 1.6")
Weight: 180 g (6.4 oz)
Simple Data Collection
and Analysis
The HH2000 Series models HH2001P,
HH2001LT, HH2001KL, HH2002AL
and RH-202L feature special logging
functions that enable readings to be
” symbol
taken, stored, retrieved and downloaded
in the shortest possible time. This
reduces the risk of clerical errors and
saves writing and keying-in time when
analysis is needed.
Logging on Demand
Logging on demand allows readings
to be stored when required, with the
ability to add a four-digit reference
number (including decimal point) to
each reading and record the date and
time each reading is taken. This function
is excellent for helping cut down on
paperwork and clerical errors. It is
ideally suited to tasks where you wish to
maintain a record of the time and date
a temperature was taken.
Preset Interval Logging
Preset interval logging lets you
determine the frequency at which
readings are taken. Once the instrument
has been set, readings are taken
automatically at the interval you decide
(from once every minute to once every
24 hours), providing an excellent means
of troubleshooting and examining trends
over a given period of time.
With preset interval logging, you
really can “set it and forget it,” as the
instrument will continue logging until a
maximum of 250 readings is taken or
your data is downloaded.
Data Analysis
Data can be viewed and analyzed
directly from the magnified display.
By simply pressing a few keys, you
can scroll through your readings with
ease. You can then download the data
to a PC or Epson compatible printer
via OMEGA’s HHP-2000-DL (see next
page). Data can then be analyzed
using our OM-MLWIN.
L
L-42
Data Download with the
HHP-2000-DL
Access to stored information is
gained via OMEGA’s infrared
HHP-2000-DL, which is designed to
give users a quick and simple means
of retrieving and downloading data.
Information can be output direct to
either an Epson compatible printer for
immediate study or downloaded to a
* for more detailed analysis.
PC
Minimum PC requirements:
*
386, 4 Mb RAM running with either
Windows 3.1X or Windows 95.
Data Analysis with
OM-MLWIN for Windows
OMEGA has created a Windows
software package enabling
information to be put into
spreadsheets and charts for
incorporating into reports and other
documents. Even separate reports
from different units can be merged to
produce one report.
PC analysis really couldn’t be any
simpler. By following the software’s
simple menu instructions, you will
find it easy to view and manipulate
information to your individual
requirements. For example, once
a logging session is complete,
all you need to do in order to gain
access to the information stored
within the instrument is position the
PC’s cursor over the “Retrieve Data”
menu icon, click once and press a
button on the instrument. Information
is then automatically transferred via
the infrared link and is stored within
the computer.
You can display the retrieved
information in graph format by
positioning the cursor over the
“Display As Graphical Data” menu
icon and click again. You can
access the graph produced to
highlight certain areas or key data
points, prior to printing or exporting
the graph into other software
packages. Furthermore, all
graphs show the identification
number of the instrument used,
enabling data to be cross-checked
against calibration records
helping to ensure full traceability.
HH2001 shown
smaller than
actual size.
RH-202L shown smaller
than actual size.
See omega.com
HH2001KL
shown smaller
than actual size.
These models are part of
a new family of handheld
instruments. See the
companion HH200 Series
at omega.com
With the HH2000 Series
you can download your
data to a PC or directly
to a compatible printer.
To Order Visit omega.com/hh2000 for Pricing and Details
Model HH2001KC HH2001TC HH2001LTC
Number HH2001KF HH2001TF HH2002K HH2001P HH2001K HH2001LTF HH2001PL HH2001KL HH2001A HH2002A HH2002AL
Sensor Type K T K Pt100 K T Pt100 K K, T J, K, T, J, K, T, J,
N, R, S N, R, S N, R, S
2 Input U U U
Speed Read U U U U U U U U
C/F° Function U U U U U U U U
Hold U U U U U U U U U U U
Range Lock U U U U U U U
Maximum/
Minimum U U U U U U U U U
Averaging U U
Logging U U U U
-200 to -250 to -200 to -150 to -200 to -250 to -150 to -200 to Type K: -200 to 1350°C (-328 to 2462°F)
1350°C 400°C 1350°C 800°C 1350°C 400°C 800°C 1350°C Type T: -250 to 400°C (-418 to 752°F)
Range
(-328 to (-418 to (-328 to (-238 to (-328 to (-418 to (-238 to (-328 to Type J: -180 to 750°C (-292 to 1382°F)
2462°F) 752°F) 2462°F) 1472°F) 2462°F) 752°F) 1472°F) 2462°F) Type N: -200 to 1300°C (-328 to 2372°F)
Type R: 0 to 1750°C (32 to 3182°F)
Type S: 0 to 1750°C (32 to 3182°F)
Accessories
Model No. Description
HHP-2000-DL Infrared download box and data link
OM-MLWIN Windows software (requires 4 MB RAM and Windows 3.1 or higher)
HHP-2000-RB Spare rubber boot
CAL-3-HH NIST-traceable calibration with points
HH-NIST NIST-traceable calibration, no points
Comes complete with 2 “AA” batteries, rubber boot, and operator’s manual. Thermocouple models include beaded wire thermocouple.
RTD models include TA4F connector.
Ordering Examples: HH2001PL and HHP-2000-DL, handheld thermometer, sensor Type PT100 with infrared download box and data link.
HH2001KF, handheld data logger.
L-43
Loading...