Omega Products HFP-101 User Manual
Digital HyDraulic tester
HFP-110/
120 Series
U ±1% FS Accuracy
U Turbine Flow Sensor
Gives Fast Response
U Large 3
Flow or Temperature
U Toggles Between Power,
Flow and Temperature
U Load Valve Offers
Fingertip Control of
Pressure to 6000 psi
(41.4 MPa)
The HPF-110/120 series are
compact, lightweight, self-contained
portable testers with laboratory
accuracy. Designed for fast
diagnostic troubleshooting of all
types of mobile or stationary
hydraulic systems and components,
makes all flow, pressure and
temperature measurements
1
⁄2-Digit LCD for
simultaneously from one point.
Helical type pressure gauge
provides pulsation dampening
and high over-pressure capacity.
Additional features include pressure
relief disc protection, and low
battery/over-range indicators.
Metric units are also available.
SPECIFICATIONS
Material
Housing: 2024-T351 anodized
aluminum
Turbine Rotor: T416 stainless steel
Rotor Supports: 6061-T6 aluminum
Rotor Shaft: T303 stainless steel
Seals: Buna standard; FKM and
EPR optional
Ball Bearings: 440 C stainless steel
Hub Cones: 6061-T6 aluminum alloy
Temperature Probe: 12L14 steel
(zinc plate, dichromate finish)
Valve Body for 15/30’s: Cold rolled
steel; 60/85/200
Body: 12L14
Steel Stem: 303 stainless steel
Poppet: 12L14 steel hardened
HFP-113P shown
smaller than actual size.
Straightening Section:
15/30: CA360 brass
60/85/200: 6061-T6 aluminum
Cones: 2024-T4 aluminum
200 GPM (757 LPM): Sleeve—D.O.M.
steel tube
Ports: SAE straight thread O-ring boss,
female, J1926/1; BSPP ISO1179
Magnetic Pick-Up:
Body: 12L14 steel, black oxide finish
Nut: 12L14 steel, zinc plate, dichro-
mate finish
Performance
Electrical Output Signal:
Self-generating alternating pulse,
100 mV RMS (100 Hz) min
Flow Accuracy: ±1% of full scale
Repeatability: ±0.2%
Turbine Response: < 200 ms
Fluid Temperature Range:
-20 to 150°C (-4 to 300°F)
Ambient Temperature Range:
-20 to 55°C (-4 to 131°F)
Flow Readout: Linearity and
zero shift = ±1-digit
B-69
Operating Pressure: Max 6000 psi
(414 bar, 41.4 MPa, 420 kg/cm
Fluid Temperature: Max 150°C (300°F)
2
)
Readout Accuracy: ±1-digit
Battery Type: 2 “AA” alkaline
(included); life 50 hours
Dimensions:
HFP-111/121 thru HFP-114/124:
287 x 279 x 89 mm (11.3 x 11 x 3.5")
HFP-115, HFP-125:
311 x 298 x 101 mm (12.3 x 11.8 x 4")
To Order Visit omega.com/hfp_series for Pricing and Details
Model No. Port Size Units Pressure Description Weight kg (lb)
HFP-111P SAE 12 psi 1 to 15 GPM hydraulic tester 6.3 (13.9)
HFP-112P SAE 12 psi 2 to 30 GPM hydraulic tester 6.3 (13.9)
HFP-113P SAE 16 psi 3 to 60 GPM hydraulic tester 7.5 (16.5)
HFP-114P SAE 16 psi 4 to 85 GPM hydraulic tester 7.5 (16.5)
HFP-115P SAE 24 psi 7 to 199.9 GPM hydraulic tester 9.1 (20.0)
HFP-121P G ³⁄₄ psi 4 to 56 LPM hydraulic tester 6.3 (13.9)
HFP-122P G ³⁄₄ psi 7.5 to 113.6 LPM hydraulic tester 6.3 (13.9)
HFP-123P G 1 psi 12 to 227 LPM hydraulic tester 7.5 (16.5)
HFP-124P G 1 psi 15 to 321 LPM hydraulic tester 7.5 (16.5)
HFP-125P G 1¹⁄₂ psi 26 to 757 LPM hydraulic tester 9.1 (20.0)
Comes complete with 2 “AA” alkaline batteries, and operator’s manual.
For units with BAR pressure units change the last letter in the model number from “P” to “B”, no additional change.
Ordering Examples: HFP-124P, 15 to 321 LPM hydraulic tester, G1 port size.
HPF-114P, 4 to 85 GPM hydraulic tester, SAE 16 port size.
B
Digital HyDraulic tester
witH Dynamometer
U Front Panel Selectable
U.S. or Metric Readings
U Digital Pressure to 6000
psi (41.4 MPa or 414 bar)
U Dynamometer Reads
Power (HP and kW)
Directly
U Large Easy-to-Use
Membrane Switch Selects
Flow, Temperature,
Pressure or Power
U Low Noise Input Circuitry
Provides Steadier
Readings When Flow is
Pulsating or Cavitating
U Auto/Off Automatically
Turns Power Off After
5 Minutes with No
Flow Signal
HFP-100
Series
The HPF-100 series are all-digital,
compact, lightweight, self contained portable hydraulic testers
and dynamometers. Designed for
fast diagnostic troubleshooting of
all types of hydraulic systems and
components, including enginepump combinations. Makes all flow,
pressure, temperature and power
measurements simultaneously from
one point, in either U.S. or metric
HFP-101 shown
smaller than actual size.
units (switchable). Silicon strain
gauge pressure sensor. This series
also offers other standard features
of HFP-110/120 series, however, the
HFP-100 series is NOT CE rated.
To Order Visit omega.com/hfp_series for Pricing and Details
Model No. Port Size Pressure Scale Description Weight kg (lb)
HFP-101 SAE 12 bar (psi) 1 to 15 GPM (4 to 56 LPM) digital with dynamometer 6.3 (13.9)
HFP-102 SAE 12 bar (psi) 2 to 30 GPM (7.5 to 113.5 LPM) digital with dynamometer 6.3 (13.9)
HFP-103 SAE 16 bar (psi) 3 to 60 GPM (12 to 227 LPM) digital with dynamometer 7.5 (16.5)
HFP-104 SAE 16 bar (psi) 4 to 85 GPM (15 to 321 LPM) digital with dynamometer 7.5 (16.5)
HFP-105 SAE 24 bar (psi)
Comes complete with 2 “AA” alkaline batteries, and operator’s manual.
Ordering Examples: HFP-101, digital hydraulic tester with dynamometer 1 to 15 GPM (4 to 56 LPM), HP and KW displays.
HFP103, digital hydraulic tester with dynamometer, 3 to 60 GPM (12 to 227 LPM), HP, and kW displays.
7 to 199.9 GPM (26 to 757 LPM) digital with dynamometer
B-70
9.1 (20.0)
Loading...