Omega Products HE-XDQD User Manual

SIGNAL CONDITIONER FOR



PROGRAMMABLE LOGIC
CONTROLLERS

HE-X Series

Starts at

$

130

l Designed for Use with any

Programmable Logic Controller (PLC)

l Multi-Channel Inputs and Outputs
l Convert AC Inputs to DC Outputs
l Convert DC Inputs to AC Outputs
l Convert DC Inputs to Relay Outputs
l Convert PWM Inputs to Analog

Outputs (4 to 20 mA, 0 to 10V)

l Convert DC Inputs to Solid State

Outputs (24V AC/DC, 3A)

l DIN Rail Mountable

HE-XDIA, $165,
shown smaller
than actual size.

HE-XDQA, $165, shown
smaller than actual size.

OMEGA offers several general-purpose signal
conditioning products designed to augment
the capabilities of any programmable logic
controller (PLC). These products allow
normally incompatible signals and loads (AC
inputs, AC outputs, etc.) to easily interface
with any PLC.
products are available—those which convert
AC inputs to DC outputs and DC inputs to AC
outputs, those which drive specialized digital
output loads, and those which allow analog
outputs to be generated from digital, PWM
outputs.

One model allows the connection of AC
signals to PLCs having only digital inputs:
the HE-XDIA converts 120/240 Vac inputs to
24 Vdc (8 points).

Three signal conditioning devices allow
the standard 24 Vdc, 0.5 A outputs of the
XL Series OCS to drive specialized loads. The
solid-state HE-XDQA allows a 120/250 Vac
load to be driven at up to 2 A (four points).
The solid state HE-XDQD will drive a
24 Vac/24 Vdc load at up to 3 A (four points).
The mechanical HE-XDQR can drive up to
a 10A load, supporting voltages of
120/250 Vac, and 24/30 Vdc (four points).

Three categories of these

Two signal conditioning devices provide
a PLC with additional analog outputs, by
converting 24 Vdc PWM outputs already
present on the controllers. The HE-XPC
converts 24 Vdc PWM outputs to 4 to 20 mA
(2 channels), while the HE-XPV converts 24
Vdc PWM outputs to 0 to 10V (two channels).

HE-XDIA SPECIFICATIONS

Channels per Module: 8
Isolated Commons: 1
Nominal Input Voltage: 120/240 Vac
Maximum Input Voltage: 275 Vac
Nominal Input Impedance: 0.01uF +

10 kΩ

Nominal AC Frequency: 60 Hz
ON Voltage Level: 60 Vac min
OFF Voltage Level: 30 Vac max
Isolation to PLC Common: 1500 Vdc
Minimum ON Current: 2.2 mA
Maximum OFF Current: 1.1 mA
ON Response Time Excluding PLC

Response: 1 mS
OFF Response Time: 25 mS
Status Indication: 8 LEDs
DC Output Type: Positive logic,

sourcing

Steady State Power, Inputs ON, Unit
Connected to PLC: 60 mA @ 24 Vdc

Peak Supply Current: 250 mA max

A-16

Operating Power Range: 18 to 30 Vdc
Safe Applied Power Range:

-0.3 to 33 Vdc
Relative Humidity: To 95%

non-condensing
Operating Temperature: 0 to 50°C

(32 to 122°F)
Terminal Type: Screw type, 5 mm

(0.20") removable

HE-XDQA SPECIFICATIONS

Channels per Module: 4
Isolated Commons: 1
Nominal Load Voltage: 120/240 Vac
Maximum Load Voltage: 275 Vac
Nominal DC Input Impedance: 1 kΩ
Nominal AC Frequency: 60 Hz
ON Input Level: 18 Vdc min
OFF Input Level: 6 Vdc max
Maximum DC Input Range:

-0.3 to 30 Vdc

AC Isolation to PLC Common:

1500 Vdc

Maximum ON Load Current: 2 A AC
Maximum OFF Leakage Current at

120 Vac: 1.0 mA AC
ON Response Time Excluding PLC

Scan Time: 9 mS max
OFF Response Time: 9 mS max
Status Indication: 4 LEDs
DC Input Type: Positive logic, sinking



Dimensions: mm (in)

82.3

(3.24)

101.6
(4.00)

22.5

(0.89)

Steady State Power, Inputs ON:

100 mA @ 24 Vdc

Peak Supply Current: N/A
Operating Power Range: N/A
Safe Applied Power Range: N/A
Relative Humidity: 5 to 95%

non-condensing
Operating Temperature: 0 to 50°C

(32 to 122°F)
Terminal Type: Screw type, 5 mm

(0.20") removable

HEXPV/HEXPC SPECIFICATIONS

Channels per Module: 2
Nominal PWM Input Voltage: 24V P-P
Maximum Input Voltage Range:

-0.5 to 33 Vdc

Nominal Input Impedance:

2.1 kΩ to common
Max Upper Input Threshold: 18 Vdc

To Order (Specify Model Number)

MODEL NO. PRICE DESCRIPTION

HE-XDIA $165 8 channel, 120/240 Vac inputs to 8 channel, 24 Vdc outputs
HE-XDQA 165 24 Vdc, 0.5 A inputs to 120/250 Vac 2 A outputs, 4 channels
HE-XDQR 165 24 Vdc, 0.5 A inputs to 10 A relay outputs (120/250 Vac, 24/30 Vdc), 4 channels
HE-XDQD 165 24 Vdc, 0.5 A inputs to solid state outputs (24 Vac/Vdc, 3A), 4 channels
HE-XPC 130 Dual channel PWM to 4 to 20 mA analog converter
HE-XPV 130 Dual channel PWM to 0 to 10V analog converter

Ordering Example: HE-XDIA, 8 channel signal conditioner, $165.

Min Lower Input Threshold: 6 Vdc
Step Change Response to 50%: 12 ms
PWM Ripple Feed Through 150 Hz,

50% Duty Cycle: 0.40% of full scale, P-P
250 Hz, 50% Duty Cycle: 0.04% of

full scale, P-P
500 Hz, 50% Duty Cycle: 0.0015% of
full scale, P-P

Isolation: None
0 to 10V Outputs (HEXPV):

Minimum Load: 500Ω

Output Clamp: -0.5/+12 Vdc

0 to 20 mA Outputs (HEXPC):

Type: Sourcing
Maximum Load: 500Ω

Output Clamp: -0.5/+12 Vdc
FS Calibration Accuracy: 0.25%
System Linearity including XLE:

0.75% Accuracy thru 10 to 90% DC
of PWM Input

A-17

HEXPV Minimum Output Voltage: 0.15V
typical

HEXPC Minimum Output Current:

0.15/(100+RLoad) typical

Required Power (Steady State):

60 mA @ 24 Vdc

Required Power (Inrush): 15 A @ µS
Operating Power Range: 18 to 30 Vdc
Safe Applied Power Range:

-33 to 33 Vdc
Relative Humidity: To 95%

non-condensing
Operating Temperature: 0 to 50°C

(32 to 122°F)
Terminal Type: Screw type, 5 mm (0.20")

removable
Weight: 85 g (3 oz)

AVAILABLE FOR FAST DELIVERY!