Page 1
DUAL-HEAD INJECTOR METERING PUMPS
FPUDX1700A
Series
U Simple Intake and
Discharge Check
Valve Design
U Quick-Adjusting
Feed Mechanisms
U Dual Side-Mounted
Cartridge Valve Heads
U Each Head Independently
Controlled
U Top-Mounted Feed
Adjustment
U 100% Duty Cycle
FPUDX1700A Series dual-head
injector pumps feature side-mounted
heavy-duty cartridge valve heads.
Coming in contact with liquid, the
durable end of these pumps is made
of injection-molded polypropylene
and has double-sealed PVDF
cartridge valve fittings, FKM O-ring
seals, ceramic ball checks, Hastelloy
valve springs, and a PTFE/EPDM
diaphragm. The user can easily
control each head with a top-mounted
feed adjustment. These pumps are
suitable for a variety of applications,
including injecting different amounts
of similar chemicals into separate
systems and feeding 2 different
chemicals into the same system.
One should also use these pumps if
a single-head pump does not provide
sufficient output.
FPUDX17001A
shown smaller
than actual size.
Includes Check Valves,
Flow Indicator, Injection and
Foot Valves, 1.5 m (5') Each
of Vinyl Suction Tubing
and Polyethylene
Discharge Tubing
SPECIFICATIONS
Output Accuracy: ±10% of maximum
[water @ 21°C (70°F) and 1.5 m (5')
suction lift]
O-Ring: FKM standard; ethylene
propylene, silicone optional
Turndown Ratio: 10:1
Power: 115/60 Hz, optional
230V/60 Hz, 220V/50 Hz, 24 V/60 Hz
Dimensions: 241 H x 191 W x 102 mm D
(9.5 x 7.5 x 4")
Shipping Weight: 4.5 kg (10 lb)
Tube Dimensions:
Maximum Fluid Temperature:
54°C (130°F)
Enclosure: NEMA 3R (IP24)
(acceptable for outdoor use)
Maximum Viscosity: 1000 centipoise
Maximum Suction Lift: Up to 3 m (10')
of waterimum
3
⁄8" OD, 1⁄4" ID
To Order Visit omega.com/fpudx1700 for Pricing and Details
Model No. Maximum GPD mL/min Strokes/min Maximum psi
FPUDX1701A 34.2 90 30 125
FPUDX1702A 89.7 236 45 125
FPUDX1703A 133.8 352 125 125
FPUDX1704A 304.2 800 125 20
Comes complete with
valves, 1.5 m (5') each of vinyl suction tubing and polyethylene discharge tubing.
For 230 V/60 Hz voltage, add suffix “-230V60” to model number
For 220 V/50 Hz voltage, add suffix “-220V50” to model number (maximum GPD decreases by
20%)
, for additional cost.
For 24 V/60 Hz voltage, add suffix “-24V60” to model number
Ordering Examples: FPUDX1701A, pump with 32.7 GPD (86 mL/min) range,125 psi maximum,
30 strokes/min.
FPUDX1704A, pump with 285.3 GPD (750 ml/min) range.
operator’s manual, check valves, flow indicator, injection and foot
, for additional cost.
, for additional cost.
L-9
Loading...