Omega Products FPUDT1509 User Manual

Heavy-Duty DiapHragm-type injector metering pumps

Comes with handy ﬂow

FPUDT1500 Series

U Single Intake

and Discharge

U Check Valve Design U Quick-Adjusting Feed

Mechanism

U Heavy-Duty Cartridge

Pumphead

U PTFE/EPDM Diaphragm U Optional Timer Available U Comes with Flow Indicator

and 7.5 m (25') of Tubing

U Can be Wall- or Shelf-Mounted U 100% Duty Cycle

indicator. Additional pump accessories available at omega.com

FPUDT1503 shown smaller than actual size.

The FPUDT1500 Series injector pumps feature a heavy-duty cartridge valve pumphead made of injection-molded polypropylene. The pump consists of double-sealed PVDF cartridge valve ﬁttings, FKM O-ring seals, ceramic ball checks, Hastelloy C valve springs, and a PTFE/EPDM diaphragm. An optional built-in electronic percentage timer allows the user to adjust the feed rate or both the stroke of the diaphragm and the timer. The pump can also be purchased as part of a tank system.

SPECIFICATIONS

Output Accuracy: ±10% of maximum

(water 0 psi, 5' suction lift) Pumphead Material: Standard polypropylene; acrylic optional Diaphragm Material: PTFE/EP standard; PTFE/FKM, EP, FKM optional O-Ring Material: FKM standard; EP, silicone optional

Cartridge Body Material: PVDF Motors: 14, 30, 45, 60, 125 rpm Voltage: 115 V/60 Hz; optional

230V/60 Hz, 220V/50 Hz, 24V/60 Hz Dimensions: 127 H x 140 W x 238 mm D (5.0 x 5.5 x 9.4")

Shipping Weight: 4.5 kg (10 lb) Tube Dimensions: Maximum Pressure: 8.6 bar (125 psig) Maximum Fluid Temperature:

54°C (130°F)

Maximum Viscosity: 1000 centipoise Maximum Suction Lift: 3 m (10') water Turndown Ratio: 20:1

⁄8" OD, 1⁄4" ID

To Order Visit omega.com/fpudt1500 for Pricing and Details

Model No. Maximum GPD Maximum mL/min Strokes/min Maximum psi

FPUDT1501 6.6 22 14 125 FPUDT1502 12.9 34 14 125 FPUDT1503* 16.3 46 30 125 FPUDT1504* 30 82 30 125 FPUDT1505* 26.6 77 45 125 FPUDT1506* 49.0 129 45 125 FPUDT1507* 31.1 92 60 125 FPUDT1508* 57.7 158 60 125 FPUDT1509* 68.4 180 125 125 FPUDT1510* 119.7 315 125 70

Comes complete with ﬁttings, adaptors, ﬂow indicator, 1.5 m (5') each of polyethylene and vinyl tubing, and operator’s manual.

Available with built-in stroke and time interval adjustment. To order, add sufﬁx “-D” to model

number, for additional cost. For 230 V/60 Hz voltage, add sufﬁx “-230V60” to model number, for additional cost. For 220 V/50 Hz voltage, add sufﬁx “-220V50” to model number, for additional cost. For 24 V/60 Hz voltage, add sufﬁx “-24V60” to model number, for additional cost. Ordering Examples: FPUDT1506-D, pump with 45 rpm, 49.0 max GPD, 129 max mL/min range and optional timer. FPUDT1503-230V/60 pump with 45 rpm, 16.3 maximum GPD, 46 maximum m/1min range with 230 V/60 Hz.

L-XX