Omega Products FPUD1101 User Manual

Diaphragm-Type injecTion meTering pumps

FPUDV1101 shown smaller than actual size.

FPUD1000 Series

U Adjustable Stroke Length

for High Accuracy Pumping with Front Mount Mechanical Feed Rate Adjustment

U Variable Speed Models

with Digital or Dial Knob Control

U Fixed Speed Models

with Available Cycle Time Control

U High Output Flow Rate

to 1363 LPD/360 GPD (56.8 LPH/15 GPH)

U 10.3 bar (150 psig)

Maximum Outlet Pressure

U Double Ball Inlet and

Outlet Cartridge Type Ceramic Check Valves

U 20:1 Turndown Ratio

(5 to 100%) Stroke

Length Adjustment

U Variable Speed and

Cycle Time Models Feature Additional 20:1 Turndown for 400:1, Total Turndown (0.25 to 100%)

U Double-Ball Inlet and

Outlet Cartridge Type

The FPUD1000 Series positive displacement metering pumps can inject chemicals into piping systems against a high pressure system of up to 10.3 bar (150 psig). A front mounted mechanical ﬂow rate adjustment knob varies the stroke length to vary the feed rate.

SPECIFICATIONS

Maximum Working Pressure:

10.3 bar (150 psig) Maximum Fluid Temperature: 54°C (130°F) Ambient Temperature: -10 to 43°C (14 to 110°F)

Maximum Viscosity: 1000 centipoise Maximum Suction Lift: 3 m (10')

water, 0 psig Stroke Adjustment Range: 20:1, 5 to 100% stroke length

L-7

Cycle Time Adjustment Range (FPUD1100 Models Only): 20:1,

5 to 100% cycle time

Motor Speed Adjustment Range (FPUDM and FPUDVM Models Only):

20:1, 5 to 100%

Duty Cycle: Continuous Enclosure: NEMA (IP21), FPUD1100

& FPUDM models; NEMA 3R (IP23), FPUDV and FPUDVM models; VALOX thermoplastic Wetted Materials: Polypropylene pump head, footvalve/strainer and check valve body/insert, PVDF cartridge valve body and tube adaptors, ceramic check balls; TFE/P and FKM O-rings; Hastelloy C-276 spring Power: 115 Vac/60 Hz; 1.87 A maximum; 220 Vac/60 Hz, 220 or 240 Vac/50 Hz also available (special order only) Connections: discharge tubing Dimensions: 159 H x 235 W x 254 mm D (6.25 x 9.25 x 10")

Weight: 5.4 kg (12 lb) maximum

PFUDV Digital Display Models Additional Speciﬁcations

External Speed Control: 4 to 20 mA,

0 to 10 Vdc, and pulse inputs Display: LCD; indicate motor speed or input signal values, and service and alarm indicator icons Dimensions: 159 H x 267 W x 254 mm D (6.25 x 10.5 x 10")

" OD suction and

⁄

FPUDM1101 shown smaller than actual size.

To Order Visit omega.com/fpud1100 for Pricing and Details

Diaphragm-Fixed Speed Variable Speed Max Feed Rate @ 0 psi

Mechanical 60 Seconds Stroke Adjustable Dial Knob Digital Control Cycle Time Control Touchpad GPD GPH LPH

FPUDM1101 FPUD1101 FPUDVM1101 FPUDV1101 360.0* 15.0 56.8 FPUDM1102 FPUD1102 FPUDVM1102 FPUDV1102 305.7* 12.7 48.2 FPUDM1103 FPUD1103 FPUDVM1103 FPUDV1103 260.8* 10.8 41.1 FPUDM1104 FPUD1104 FPUDVM1104 FPUDV1104 155.9* 6.4 24.6 FPUDM1105 FPUD1105 FPUDVM1105 FPUDV1105 119.7* 4.9 18.9 FPUDM1106 FPUD1106 FPUDVM1106 FPUDV1106 91.2* 3.8 14.4 FPUDM1107 FPUD1107 FPUDVM1107 FPUDV1107 73.0* 3.0 11.5 FPUDM1108 FPUD1108 FPUDVM1108 FPUDV1108 57.7* 2.4 9.1 FPUDM1109 FPUD1109 FPUDVM1109 FPUDV1109 38.0* 1.5 6.0

Note: 260.8 GPD = 100 psi maximum; 305.7 GPD = 80 psi maximum; 360.0 GPD = 25 psi maximum.

Comes complete with suction tube foot valve and strainer, suction tube weight, 1.5 m (5') PVC suction tubing, 3 m (10') PE discharge tubing and injection ﬁtting with internal backﬂow check valve, mounting hardware and operator’s manual.

Ordering Examples: FPUDV1101, variable-speed pump 15 GPH (56.8 LPH).

FPUD1107 electronic percentage diaphragm pump.

Accessories

Model No. Description

TYPE-3814-100 ³⁄₈ x ¹⁄₄" PE tubing, 30 m (100') TYSP5F-3814-50 ³⁄₈ x ¹⁄₄" santoprene tubing, 15 m (50') FPUD1000-V Top and bottom valve assembly kit FPUD1000-BC Bullet cartridges (4-pack) FPUD1000-D Diaphragm PTFE/EP FPUD1000-PHK Complete pumphead kit (pumphead, top and bottom

valves, diaphragm and 4 mounting screws) FPU1000-IF Injection ﬁtting FPUSV-V Foot valve strainer FPU1000-AB Armature bearings (life cycle, 5000 hours) FPUD1000A-BK Replacement brush kit for analog models FPUD1000D-BK Replacement brush kit for digital models

L-8