Omega Products FPU101 User Manual

®

OMEGAFLEX

OEM STYLE

PERISTALTIC PUMPS

FPU100 Series

Starts at

$

78

FPU101 pump, $78, shown
smaller than actual size,
supplied with Norprene tubing
and mounting panel.

FPU4500, $209,
shown smaller
than actual size.

⻬ UL-Listed AC or DC Motor
⻬ Suitable for Fluids Carrying

Small Particles

⻬ Easy to Maintain
⻬ Mounting Panel Standard
⻬ Benchtop Case Optional
⻬ New High-Flow FPU4500 Series Has

2000 mL/Min Capacity

FPU100 Series peristaltic pumps offer simplicity at a
reduced cost. The UL-listed AC or DC motor turns the
rollers, which squeeze fluid through the precision-bore
high-tolerance tubing in a wavelike motion, acting like
a positive displacement pump. The fluid doesn’t touch
the pump; it only comes into contact with the tubing.
This makes the pump suitable for fluids carrying small
particles. FPU100 pumps continuously overocclude
the tubing, which makes the pump self-priming and
non-siphoning. They are easy to maintain, with few
moving parts and no seals or valves to clog, clean,
or replace. As one section of tube fatigues, just move
the tubing to a section that hasn’t been under the
rollers and continue pumping. Or simply replace the
supplied tubing. The replacement 230 mm (9") lengths

of precision-bore tubing ensure repeatable pumping
rates time after time. The pumps are supplied with
tubing that has polyethylene union connectors for
hooking up system tubing. The replacement 230 mm
(9") lengths of tubing come without connectors. The
pumps are supplied standard with a mounting panel.
The AC-powered pumps are also available in a rugged
polycarbonate enclosure for bench mounting. Maximum
backpressure is 15 psi without derating (up to 25 psi
@ 75% of maximum flow). Maximum suction head is

8.5 m (28'). Flow rate repeatability from one pump to
the next or when replacing tubing is within 8% of
maximum flow rate listed. Shipping weight is 1.6 kg
(3.5 lb) for all sizes. These pumps are ideal for
metering/dosing, repetitive dispensing, and general
liquid/gas transfer, and they have a 100% duty cycle
for continuous operation.

SPECIFICATIONS (FPU100)

Mounting Plate: 94 L x 130 W x 109 mm D

(3.74 x 5.12 x 4.28"); 5.6 mm (0.22") diameter holes are
centered 76 x 110 mm (3.0 x 4.34") on the plate
For units with rear fan: 130 L x 130 W x 135 mm D
(5.11 x 5.12 x 5.28") overall

Case: 152 H x 152 W x 102 mm D (6 x 6 x 4")
Shipping Weight: 1.6 kg (3.5 lb)
Ambient Temp Range: 20 to 30°C (68 to 86°F)
Max Liquid Viscosity: 8500 cp

SPECIFICATIONS (FPU4500)

Electrical: 115 Vac/60 Hz
Flow Rate: 2000 mL/min (78.6 oz)
Mounting: 12-gage zinc-plated steel mounting plate (included)
Dimensions: 140 H x 116 W x 191 mm D (5.5 x 4.6 x 7.5")
Shipping Weight: 2.4 kg (5.3 lb)

L-25

For a Complete

®

Selection of OMEGAFLEX

Tubing and Accessories,

See Section T

Pages T-13 to T-66

Benchtop Case Available

The AC-powered pumps are also
available in a rugged polycarbonate
enclosure with on/off switch, power
indicator lamp, and rubber feet for
benchtop use. Each is supplied with
a 1.8 m (6'), 115 Vac, 3-wire cord.
To order, select the desired pump.
Add suffix “-CASE” to model
number and add $75 to price. For
240 Vac models with European
plug, consult OMEGA’s Flow
Department. An optional 24-hour
timer with momentary “on” switch for
priming the pump is also available
for the case unit. The timer is
settable up to 24 hours in increments
of 15 minutes by internal DIP
switches. To order case unit with
timer for 115 Vac, add suffix
“-CASE-CT” to model number and
add $95 to price.

Replacement
230 mm (9")
Tubing Lengths

Model No. Price (ID x OD)

FPU116-S $6

FPU18-N 4

FPU18-S 4

FPU316-N 4

FPU316-S 4

FPU14-N 4

FPU14-S 4

Tubes are supplied inserted into

*

tubes. Connection is made to the
internal tubing.

Brushless 115 Vac, 60 Hz induction motors;
flow rates based on pumping water.

Recommended Reference Book:

Systematic Methods

of Chemical Process Design

CM-4441, $112.

For Additional Books

Description

1

" x

⁄

16

silicone tubing*

1

" x

⁄

8

Norprene tubing

1

" x

⁄

8

tubing

3

" x

⁄

16

Norprene tubing

3

" x

⁄

16

silicone tubing

1

" x

⁄

4

Norprene tubing

1

" x

⁄

4

silicone tubing

See Section Y

1

"

⁄

8

3

"

⁄

8

3

" silicone

⁄

8

3

"

⁄

8

3

"

⁄

8

7

"

⁄

16

7

"

⁄

16

3

1

⁄

16

3

" x

"

⁄

⁄

16

8

1

" x

"

⁄

8

FPU111-CASE, $153,
shown smaller than
actual size.

MOST POPULAR

MODELS HIGHLIGHTED!

To Order (Specify Model Number) Norprene Tube Standard

Approx. Flow Rate Average Tube Life
Model @ 60 Hz Tube Silicone Norprene
No. Price mL/Min GPM ID Hours†Hours†rpm Amperage**

FPU101 $78 3 0.0008
FPU102 78 5 0.0013
FPU103 78 6 0.0016
FPU104 78 12 0.0032
FPU105 78 20 0.0052
FPU106 78 25 0.0065
FPU107 78 30 0.008
FPU108 78 45 0.012
FPU109 78 50 0.013
FPU110 78 55 0.015
FPU111 78 70 0.018
FPU112 78 80 0.022
FPU113 78 100 0.026
FPU114 78 100 0.026
FPU115 78 115 0.030
FPU116 78 130 0.034
FPU117 95 150 0.040
FPU118 95 165 0.044
FPU119 95 195 0.052
FPU120 95 250 0.066
FPU121 95 360 0.095
FPU122 95 425 0.110
FPU123 125 635 0.168
FPU124 125 750 0.200
FPU125 125 1000 0.265

FPU4500* 209 2000 0.528

Comes complete with operator’s manual and mounting panel.

The FPU4500 comes with Norprene tubing (not available as a case unit with timer).

*

(FPU100 Series)

240 Vac amperage is

**

units, consult OMEGA’s Flow Engineering Department.

†

Pumps are supplied with Norprene tubes standard. For silicone tubing, add suffix “-SL” to model

number, no additional charge.
Note: DC-powered versions have a 500 hr life; for long-term or continuous applications, use the

standard 115 Vac powered models.
For units powered by 12 or 24 Vdc, add suffix “-12VDC” or “-24VDC” to the model number and
$20 to the price.

For units powered by 240 Vac @ 50 Hz, add suffix “-240VAC” to model number and $10 to price.
50 Hz units have approximately

For dual head units with 2 separate outputs, add suffix “-DUAL” to model number and $45
to price, for FPU101 through FPU120. For FPU121 through 125-DUAL, add $70 to price.

Ordering Examples: FPU119-240VAC-DUAL, 240 Vac, 50 Hz powered, dual-head unit with a total

5

flow of

FPU109-SL, 50 mL/min pump with silicone tube, $78.
FPU107-CASE, pump with polycarbonate enclosure, $78 + 75 = $153.

x 2000 mL/min = 1666 mL/min, $95 + 10 + 45 = $150.

⁄

6

1

that for 115 Vac; for 24 Vdc power, 0.8 A nominal max. For dual-head

⁄

2

5

⁄

6

L-26

1

" 2600 5200 14 0.37

⁄

16

1

" 1600 3200 23 0.42

⁄

16

1

" 1300 2600 28 0.75

⁄

16

1

" 2600 5200 14 0.37

⁄

8

1

" 1600 3200 23 0.42

⁄

8

1

" 1300 2600 28 0.75

⁄

8

3

" 2600 5200 14 0.37

⁄

16

3

" 1600 3200 23 0.42

⁄

16

1

" 2600 5200 14 0.37

⁄

4

3

" 1300 2600 28 0.75

⁄

16

3

" 1000 2000 36 0.90

⁄

16

1

" 1600 3200 23 0.42

⁄

4

3

" 750 1500 48 1.00

⁄

16

1

" 1300 2600 28 0.75

⁄

4

3

" 600 1200 58 1.20

⁄

16

1

" 1000 2000 36 0.90

⁄

4

3

" 500 1000 75 1.50

⁄

16

1

" 750 1500 48 1.00

⁄

4

1

" 600 1200 58 1.20

⁄

4

1

" 500 1000 75 1.50

⁄

4

1

" 350 700 108 1.90

⁄

4

1

" 300 600 129 2.20

⁄

4

1

" 200 400 172 2.20

⁄

4

1

" 180 360 203 2.20

⁄

4

1

" 130 260 282 2.20

⁄

4

3

" 500 1000 154 3.80

⁄

8

of the capacity of standard 60 Hz units.

†

L